DOI QR코드

DOI QR Code

Analysis of Anatomical Characteristics for Wood Species Identification of Commercial Plywood in Korea

국내 유통 합판의 수종식별을 위한 해부학적 특성 분석

  • LEE, Hyun Mi (Division of Timber Engineering, National Institute of Forest Science) ;
  • JEON, Woo Seok (Research & Development Team, Eagon Industrial CO, LTD) ;
  • LEE, Jei Wan (Division of Forest Genetic Resources, National Institute of Forest Science)
  • Received : 2021.08.17
  • Accepted : 2021.10.18
  • Published : 2021.11.25

Abstract

International efforts to prevent illegally logged wood are expanding around the world. The "Legal Wood Trade Promotion System" was enacted in Korea in 2019 to strengthen the legal import and distribution of commercial wood in Korea. Since then, this system has promoted and ensured that the imported wood and wood products are legal with respect to the country of origin, wood species, and harvested area. As verification methods, DNA analysis technology and anatomical analysis using a microscope are mainly used in conjunction. Therefore, in this study, wood species of plywood were identified by analyzing the anatomical characteristics of various wood products for the first time. Douglas fir (Pseudotsuga menziesii (Mirb.) Franco.) and larch (Larix kaempferi (Lamb.) Carriere) plywoods (7, 9 ply) were obtained from four companies that supply plywood in Korea. After cutting each company's plywood to a size of about 1 cm3, the layers from top to bottom were separated into single layers, and three sections were observed using an optical microscope. The results revealed that the plywood was composed of a mixture of softwood and hardwood wood species, pine wood species, poplar wood species, or a mixture of larch and pine wood species. Identification of wood species using microscopy is important and can enable the scientific analysis and verification of various wood products, including plywood, imported from countries where the likelihood of indiscriminate distribution of illegal wood and illegal logging is high.

전 세계적으로 불법목재 방지를 위한 국제적 노력이 확대되고 있으며, 우리나라는 국내에 수입·유통되는 목재의 합법성을 강화하기 위하여 2019년 '합법목재 교역촉진제도'를 시행하고 있다. 합법목재 교역촉진제도는 목재, 목재제품 등을 수입할 시 생산 국가, 수종, 벌채지 등에 대해 합법한 목재임을 입증하는 제도이다. 입증 방법에는 주로 DNA 분석 기술과 현미경을 이용한 해부학적 특징 분석이 함께 이용되고 있다. 따라서, 본 연구에서는 다양한 목재제품 중에 우선적으로 합판의 해부학적 특성을 분석하여 수종 식별을 하였다. 공시재료는 합판 생산 기업의 합판(7, 9ply)을 취급하는 4업체를 선정하여 미송(Pseudotsuga menziesii (Mirb.) Franco.) 및 낙엽송(Larix kaempferi (Lamb.) Carriere)합판을 구입하여 시료를 확보하였다. 각 회사의 합판을 약 1cm3 크기로 절삭한 뒤, 표판부터 이판까지 하나의 단판으로 분리하여 광학현미경을 이용하여 3단면을 관찰하였다. 수종식별 결과, 침·활엽수 혼합 합판과 소나무류, 포플러류, 낙엽송·소나무류의 혼합으로 구성되어 있었다. 현미경법을 이용한 목재의 수종식별은 무분별한 불법 목재의 유통 및 불법 벌채 위험국가로부터 수입되는 합판을 비롯한 다른 여러 가지 목재 제품을 과학적으로 분석·검증할 수 있는 중요한 분야이다

Keywords

References

  1. Bae, S.G., Lim, J.H., Kim, S.J., Lee, M.B. 2012. Economic Tree④ Larch. Research application. National Institute of Forest Science, pp. 135-145.
  2. Eom, Y.J., Park, B.D. 2018. Wood species identification of documentary woodblocks of Songok Clan of the Milseong Park, Gyeongju, Korea. Journal of the Korean Wood Science and Technology 46(3): 270-277. https://doi.org/10.5658/WOOD.2018.46.3.270
  3. Eom, Y.G. 2015. Wood anatomy of Korean species. Published by MEDIA WOOD., Ltd, Seoul, Republic of Korea.
  4. Han, Y.J., Lee, H.M., Eom, C.D. 2016. Physical and mechanical properties of Korean red pine wood form different sites and correlations between them. Journal of the Korean Wood Science and Technology 44(5): 695-704. https://doi.org/10.5658/WOOD.2016.44.5.695
  5. Han, Y.J., Kim, M.J., Lee, H.M., Kang, J.T., Eom, C.D. 2017. Comparison of cellular anatomical physical and mechanical properties between Dahurian Larch and Japanese Larch. Journal of the Korean Wood Science and Technology 45(5): 525-534. https://doi.org/10.5658/WOOD.2017.45.5.525
  6. Han, Y.J., Lee, S.M., Choi, J.Y., Park, C.Y. 2021. A study on classification of wood cultural resources in South Korea. Journal of the Korean Wood Science and Technology 49(5): 430-452. https://doi.org/10.5658/WOOD.2021.49.5.430
  7. IAWA Committee. 1989. IAWA list of microscopic features for hardwood identification by an IAWA Committee. E.A. Wheeler, P. Bass & P.E. Gasson (eds.). IAWA Bull. n. s. 10: 235-330.
  8. IAWA Committee. 2004. IAWA list of microscopic features for softwood identification by an IAWA Committee. H. G. Richter, D. Grosser, I. Heinz & P.E. Gasson (eds.). IAWA Journal 25(1): 20-69.
  9. Jang, S.R., Jae, H.J., Kim, J.H., Febrianto, F., Kim, N.H. 2014. Anatomical characteristics of major plantation species growing in Indonesia II. Journal of the Korean Wood Science and Technology 42(6): 635-645. https://doi.org/10.5658/WOOD.2014.42.6.635
  10. Jeon, W.S., Lee, H.M., Park, J.H. 2020. Comparison of anatomical characteristics for wood damaged by Oak Wilt and sound wood from Quercus mongolica. Journal of the Korean Wood Science and Technology 48(6): 807-819. https://doi.org/10.5658/WOOD.2020.48.6.807
  11. Jeong, S.H., Park, B.S. 2008. Results of wood species identification analysis for commercial plywood in Korea. Research Application. No.29, pp. 36-56.
  12. Jin, S.S. 1994. Research trends and development directions of plywood and similar products. Journal of the Korean Wood Science and Technology 22(3): 1-16.
  13. Kim, M.J., Seo, J.W., Kim, B.R. 2018. Anatomical Characteristics of Korea Red Pines According to Provinces. Journal of the Korean Wood Science and Technology 46(1): 100-106. https://doi.org/10.5658/WOOD.2018.46.1.100
  14. Kim, J.G. 2008. A study on laminated furniture for organic form and utility of Fullscale mode. Journal of the Korea Furniture Science 19(5): 319-327.
  15. Ko, J.H., Roh, J.K. 2015. Utilization of waste bone powders as adhesive fillers for plywood. Journal of the Korean Wood Science and Technology 43(4): 528-537. https://doi.org/10.5658/WOOD.2015.43.4.528
  16. Kim, J.H., Yang, S.M., Lee, H.J., Park, K.H., Kang, S.G. 2020. A study on the evaluation and improvement of permeability in radial and tangential section of domestic softwoods. Journal of the Korean Wood Science and Technology 48(6): 832-846. https://doi.org/10.5658/WOOD.2020.48.6.832
  17. Korea Forest Service. 2005. Policy Press Release.
  18. Korea Forest Service. 2021. Indonesia Wood Industry Trends, pp. 6.
  19. Koch, G., Haag, V., Heinz I., Richter H-G., Schmitt, U. 2015. Control of internationally traded timber-The role of macroscopic and microscopic wood identification against illegal logging. Journal of Forensic Research 6(6): 1-4.
  20. Kwon, O.K., Kim, N.H., Kim, J.S., Seo, J.W., Jeong, Y.J. 2020. Wood Anatomy, pp. 48-104.
  21. Lee, I.J., Pack, J.H., Song, D.B., Jomg, S.I. 2018. Longitudinal bonding strength performance evaluation of Larch lumber. Journal of the Korean Wood Science and Technology 46(1): 85-92. https://doi.org/10.5658/WOOD.2018.46.1.85
  22. Lee, H.M., Bae, J.S. 2021. Major speices and anatomical characteristics of the wood used for national use specified in Yeonggeon-Uigwes of the Late Joseon Dynasty Period. Journal of the Korean Wood Science and Technology 49(5): 462-470. https://doi.org/10.5658/WOOD.2021.49.5.462
  23. Marbun, S.D., Wahyudi, I., Suryana, J., Nawawi, D.S.. 2019. Anatomical structures and fiber quality of four lesser-used wood species grown in Indonesia. Journal of the Korean Wood Science and Technology 47(5): 617-632. https://doi.org/10.5658/wood.2019.47.5.617
  24. Min, H.J., Kim, E.J., Shinn, S.W., Bae, Y.S. 2019. Antidiabetic activities of Korean Red Pine(Pinus densiflora) Inner Bark Extracts. Journal of the Korean Wood Science and Technology 47(4): 498-508. https://doi.org/10.5658/WOOD.2019.47.4.498
  25. Park, S.Y., Eom, C.D., Seo, J.W. 2015. Seasonal change of cambium activity of pine trees at different growth sites. Journal of the Korean Wood Science and Technology 43(4): 411-420. https://doi.org/10.5658/WOOD.2015.43.4.411
  26. Passedat, N., Reuling, D., Lanvin, J.D. 2009. A wood anatomy methodology to identify the main species used for French plywood. CAN Direct 61(1): 37-48.
  27. Roh, J.K., Kim, Y.G. 2018. Bonding properties and resin exudation characteristics of Pitch Pine. Journal of the Korean Wood Science and Technology 46(3): 213-220. https://doi.org/10.5658/WOOD.2018.46.3.213
  28. Yoo, H.J., JU, J.D., Park, J.J., Shin, C.S., Eom, C.D., Seo, J.W. 2021. Estimation of the optimal periods for planting and felling Larix kaempferi based on the period of its cambial activity. Journal of the Korean Wood Science and Technology 49(5): 399-415. https://doi.org/10.5658/WOOD.2021.49.5.399