Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

High-precision flux linkage observation of induction motor at low switching frequency

  • Pan, Yuedou (School of Automation and Electrical Engineering, University of Science and Technology Beijing) ;
  • Cai, Guoqing (School of Automation and Electrical Engineering, University of Science and Technology Beijing) ;
  • Zhang, Weifeng (School of Automation and Electrical Engineering, University of Science and Technology Beijing)
  • Received : 2020.09.30
  • Accepted : 2020.12.22
  • Published : 2021.02.20
⟨ Previous Next ⟩

Abstract

The delay effect caused by the switching device is not considered in traditional methods of induction motor flux observation. However, ignoring the delay effect causes the mathematical model of the induction motor flux observation to be inaccurate. In actual work, this disadvantage will affect the flux observation of the induction motor. It will also influence the anti-load performance of the motor and even lead to system instability. Especially at low switching frequencies, switch delay causes input delay. Input delay will result in configuration poles deviating from their expected position in the closed-loop control, affecting the induction motor performance. In this study, the induction motor time-delay model is established to modify the model and solve the above problem. Spectral decomposition theory is used to establish the induction motor flux observer, which configures the unstable poles of the system. The poles that deviate from their expected position are also reconfigured to the desired position, which improves the motor performance and the observing accuracy of the flux chain. Finally, the process of proving the stability of the spectral decomposition flux observer (SDFO) is provided. The reliability of the SDFO is proven through specific simulations and experiments.

Keywords

Acknowledgement

This work was supported by the National Key R&D Program of China under Grant 2019YFB1309900.

References

  1. Almeida, A.T., Ferreira, F.J.T.E., Gao, B.M.: Beyond induction motors-technology trends to move up efficiency. IEEE Trans Ind Appl 50(3), 2103-2114 (2014) https://doi.org/10.1109/TIA.2013.2288425
  2. Ma, J., Song, W., Wang, S.: Model predictive direct power control for single phase three-level rectifier at low switching frequency. IEEE Trans Power Electron 33(2), 1050-1062 (2018) https://doi.org/10.1109/TPEL.2017.2681938
  3. Zhou, M.L.: Research on control strategy of electric locomotive traction motor in full speed range. Beijing Jiaotong University, Beijing (2013)
  4. Zhao, L.T., Diao, L.J., Zhang, Z., Liu, Z.G.: Discrete-time current controller for induction motors at low switching frequency. CSEE 34(21), 3456-3466 (2014)
  5. Harnefors, L., Nee, P.H.: Model-based current control of ac machines using the internal model control method. IEEE Trans Ind Appl 34(1), 134-141 (1998)
  6. Holtz, J.: N Q: Design of fast and robust current regulators for high power drivers based on complex state variables. IEEE Trans Industry Appl 55(5), 1388-1397 (2004) https://doi.org/10.1109/TIA.2004.834049
  7. Tian, Q., Hou, X.J., Zhang, C.X., Zhao, D.: Application of complex vector current regulator in traction permanent magnet synchronous motor. Electric Drive Locomotives 2, 38-41 (2018)
  8. Wu, X.J., Yuan, Q.Q., Fu, X., Dai, P.: Low-switching frequency synchronous motor control based on complex vector regulator. Proc CSEE 32(03), 124-129 (2012)
  9. Bode, G.H., Loh, P.C.: An improved robust predictive current regulation algorithm. IEEE Trans Ind Appl 41(6), 1720-1733 (2005) https://doi.org/10.1109/TIA.2005.858324
  10. Jofre, M., Llor, A.M., Silva, C.A.: Sensorless low switching frequency explicit model predictive control of induction machines fed by neutral point clamped inverter. IEEE Trans Industr Electron 66(12), 9122-9128 (2019) https://doi.org/10.1109/tie.2018.2885717
  11. Cortes, P., Rodriguez, J., Silva, C., Flores, A.: Delay compensation in model predictive current control of a three-phase inverter. IEEE Trans Industr Electron 59(2), 1323-1325 (2012) https://doi.org/10.1109/TIE.2011.2157284
  12. Li, J., Zhan, R., Song, W.X.: Study on discrete model of flux observer for induction motor with low sampling frequency. Trans China Electrotech Soc 34(15), 3136-3146 (2019)
  13. Ma, H.X.: Improved flux linkage observation method for induction motor based on rotor field-oriented vector control. Motor Control Appl 44(08), 65-68 (2017)
  14. Zheng, Z.D., Wang, K., Li, Y.D., Ma, H.W.: AC motor current controller based on model predictive control. Trans China Electrotech Soc 28(11), 118-123 (2013)
  15. Kai, J.B.: Research on high performance control technology of low switching frequency induction motor. Huazhong University of science and technology, Huazhong (2017)
  16. Bai, X.H., Xu, C.: Design of inverter current controller based on state feedback control. Electromech Equip 31(06), 38-42 (2014)
  17. Xiao, B.: Research on parameter tuning method and anti-load disturbance observation of AC servo system. Hunan University, Hunan (2014)
  18. Fiagbedzi, Y., Pearson, A.: Feedback stabilization of linear autonomous time lag systems. IEEE Trans Autom Control 31(09), 847-855 (1986) https://doi.org/10.1109/TAC.1986.1104417
  19. Fiagbedzi, Y., Pearson, A.: Output feedback stabilization of delay systems via generalization of the transformation n method. Int J Control 51(4), 801-822 (1990) https://doi.org/10.1080/00207179008934099
  20. Qi, L.Y., Wang, C.C., Zhou, M.L., Wang, J.: A current loop decoupling control method for asynchronous motor. Trans China Electrotech Soc 29(05), 174-180 (2014)