참고문헌
- Mellor, P.H., Roberts, D., Turner, D.R.: Lumped parameter thermal model for electrical motors of TEFC design. IEE Proc. B 138(5), 205-218 (1991)
- Eva Belicov, A., Valeria Axial Hrabovcov, A.: Analysis of a flux permanent magnet machine (AFPM) based on coupling of two separated simulation models. J. Electr. Eng. 58(1), 3-9 (2007)
- Xie, Y., Wang, Y.: 3D temperature field analysis of the induction motors with broken bar fault. Appl. Therm. Eng. 66(1-2), 25-34 (2014) https://doi.org/10.1016/j.applthermaleng.2014.02.008
- Li, G.J., Ojeda, J., Hoang, E., Lecrivain, M., Gabsi, M.: Comparative studies between classical and mutually coupled switched reluctance motors using thermal-electromagnetic analysis for driving cycles. IEEE Trans. Magn. 47(4), 839-847 (2011) https://doi.org/10.1109/TMAG.2011.2104968
- Satrustegui, M., Martinez-Iturralde, M., Ramos, J.C., Gonzalez, P., Astarbe, G., Elosegui, I.: Design criteria for water cooled system of Induction machines. Appl. Therm. Eng. 114, 1018-1028 (2016) https://doi.org/10.1016/j.applthermaleng.2016.12.031
- Melkaa, B., Smolkaa, J., Hetmanczykb, J., Bulinskia, Z., Makielab, D., Ryfaa, A.: Experimentally validated numerical model of thermal and flow processes within the permanent magnet brushless direct current motor. Int. J. Therm. Sci. 130, 406-415 (2018) https://doi.org/10.1016/j.ijthermalsci.2018.04.029
- Hyeon Park, M., Chul Kim, S.: Thermal characteristics and effects of oil spray cooling on in-wheel motors in electric vehicles. Appl. Therm. Eng. 63(2), 577-587 (2019) https://doi.org/10.1016/j.applthermaleng.2013.11.057
- Kolondzovski, Z., Belahcen, A., Arkkio, A.: Multiphysics thermal design of a high-speed permanent-magnet machine. Appl. Therm. Eng. 29(13), 2693-2700 (2009) https://doi.org/10.1016/j.applthermaleng.2009.01.001
- Broussely, M., Bertin, Y., Lagonotte, P.: Reduction and optimisation of thermal models using Kirchoff's network theory. Int. J. Therm. Sci. 42(8), 795-804 (2002) https://doi.org/10.1016/S1290-0729(03)00052-8
- Bertin, Y., Videcoq, E., Thieblin, S., Petit, D.: Thermal behavior of an electrical motor through a reduced model. IEEE Trans. Energy Convers. 15(2), 129-134 (2000) https://doi.org/10.1109/60.866989
- Tovar-Barranco, A., Briz, F., Lopez-de-Heredia, A, Villara, I.: Reduced lumped parameter thermal model for external rotor permanent magnet motor design. In: IEEE Energy Conversion, 2017 IEEE Energy Congress and Exposition (ECCE). https://doi.org/10.1109/ECCE.2017.8096797
- Qi, F., An Ly, D., Christoph van der, B., Yan, D., Rik, W.: Model order reduction suitable for online linear parameter-varying thermal models of electric motors. In: 2017 IEEE Energy Conversion Congress and Exposition (ECCE). https://doi.org/10.1109/ECCE.2017.8096797
- Jaljal, N., Trigeol, J.F., Lagonotte, P.: Reduced thermal model of an induction machine for real-time thermal monitoring. IEEE Trans. Ind. Electron. 55(10), 3535-3542 (2008) https://doi.org/10.1109/TIE.2008.2003196
- Gao, Z., Colby, R.S., Habetler, T.G., Ronald, G.: A model reduction perspective on thermal models for induction machine overload relays. IEEE Trans. Ind. Electron. 55(10), 3525-3534 (2008) https://doi.org/10.1109/TIE.2008.926772
- Lazcano, U., Bauml, T., Aldasoro, L.: Geometry based reduced order thermal model for totally enclosed machines. In: International Symposium on Power Electronics, Electrical Drives, Automation and Motion (2014). https://doi.org/10.1109/SPEEDAM.2014.6871922
- Wallscheid, O., Bocker, J.: Global identification of a low-order lumped-parameter thermal network for permanent magnet synchronous motors. IEEE Trans. Energy Convers. 31(1), 354-365 (2016) https://doi.org/10.1109/TEC.2015.2473673
- Beguenane, R., Benbouzid, M.E.H.: Induction motors thermal monitoring by means of rotor resistance identification. IEEE Trans. Energy Convers. 14(3), 566-570 (1999) https://doi.org/10.1109/60.790915
- Kral, C.: Rotor temperature estimation of squirrel-cage induction motors by means of a combined scheme of parameter estimation and a thermal equivalent model. IEEE Trans. Ind. Appl. 40(4), 1049-1057 (2004) https://doi.org/10.1109/TIA.2004.830759
- Cirrincione, M., Pucci, M., Cirrincione, G., Capolino, G.-A.: Constrained minimization for parameter estimation of induction motors in saturated and unsaturated conditions. IEEE Trans. Ind. Electron. 52(5), 1391-1402 (2005) https://doi.org/10.1109/TIE.2005.855657
- Karanayil, B., Rahman, M.F., Grantham, C.: Online stator and rotor resistance estimation scheme using artificial neural networks for vector controlled speed sensorless induction motor drive. IEEE Trans. Ind. Electron. 54(1), 167-176 (2007) https://doi.org/10.1109/TIE.2006.888778
- Gao, Z., Habetler, T.G., Harley, R.G., Colby, R.S.: A sensorless rotor temperature estimator for induction machines based on a current harmonic spectral estimation scheme. IEEE Trans. Ind. Electron. 55(1), 407-416 (2008) https://doi.org/10.1109/TIE.2007.896282
- Al-Tayie, J.K., Acaruley, P.P.: Estimation of speed, stator temperature and rotor temperature in cage induction motor drive using the extended Kalman filter algorithm. Electr. Power Appl. IEEE Proc. 144(5), 301-309 (1997) https://doi.org/10.1049/ip-epa:19971166
- Foulon, E., Guibert, C., Loron, L.: Reduced-order electrical model extensions for induction machine temperature monitoring with extended Kalman filter. In: (2005) European Conference on Power Electronics and Applications. https://doi.org/10.1109/EPE.2005.219612
- Deekshitha, S.N., Shivarudraswamy, R.: Efficiency and loss analysis of proposed BLDC motor drive and existing universal motor drive used in a mixer grinder. Int. J. Mech. Eng. Robot. Res. 9(6), 808-812 (2020)
- Mellor, P.H.: Improvements in the efficiency and thermal aging of single and parallel machine drives. Ph.D. Thesis, University of Liverpool (1983)
- Taylor, G.I.: Distribution of velocity and temperature between concentric cylinders. Proc. R. Soc. A 159, 546-578 (1935)
- Gazley, C.: Heat transfer characteristics of rotational and axial flow between concentric cylinders. Trans. ASME 80, 79-89 (1958)
- Luke, G.E.: The cooling of electric machines. Trans. AIEE. 45, 1278-1288 (1923)
- Jacquelien, M.A.S.: The control handbook control system advanced methods. University of Groningen (2011)
- Nicolai, J., Bally, A.: Sensorless universal motor speed controller .US patent no: 5,986,417 (1999)