DOI QR코드

DOI QR Code

A Model for Predicting the Density of Glycerol Water Mixture, and Its Applicability to Other Alcohol Water Mixture

  • Liu, Tianhao (Department of Chemistry, College of Natural Science and Public Health and Safety, Chosun University) ;
  • Lee, Seung Hwan (Department of Chemistry, College of Natural Science and Public Health and Safety, Chosun University) ;
  • Lim, Jong Kuk (Department of Chemistry, College of Natural Science and Public Health and Safety, Chosun University)
  • Received : 2021.08.09
  • Accepted : 2021.08.17
  • Published : 2021.09.30

Abstract

A mixture of alcohol and water is commonly used as antifreeze, liquor, and the fundamental solvents for the manufacture of cosmetics, pharmaceuticals, and inks in our daily life. Since various properties of alcohol water mixtures such as density, boiling or melting point, viscosity, and dielectric constant are determined by their mixing ratio, it is very important to know the mixing ratio to predict their properties. One of simple method to find the mixing ratio is measuring the density of the mixtures. However, it is not easy to predict the mixing ratio from the density of the mixtures because the relationship between mixing ratio and density has not been established well. The relationship is dependent on the relative sizes of solute and solvent molecules, and their interactions. Recently, an empirical model to predict the density of glycerol water mixture from their mixing ratio has been introduced. The suggested model is simple but quite accurate for glycerol water mixture. In this article, we investigated the applicability of this model to different alcohol water mixtures. Densities for six different alcohol water mixtures containing various alcohols (e.g., ethylene glycol, 1,3-propane diol, propylene glycol, methanol, ethanol, and 1-propanol) were simulated and compared to experimentally measured ones to investigate the applicability of the model proposed for glycerol water mixtures to other alcohol water mixtures. The model predicted the actual density of all alcohol water mixtures tested in this article with high accuracy at various ratios. This model can probably be used to predict the mixing ratio of other alcohol water mixtures from their densities beyond 6 alcohols tested in this article from their densities.

Keywords

References

  1. C. Selvam, D. Mohan Lal, Sivasankaran Harish. Thermophysical properties of ethylene glycol-water mixture containing silver nanoparticles, Journal of Mechanical Science and Technology, 30(3), 2016, 1271-1279. https://doi.org/10.1007/s12206-016-0231-5
  2. Haimei Zhang, Building Materials in Civil Engineering, Woodhead Publishing, England, 2011, 81- 149.
  3. Diana M. Cristancho, Daniel R. Delgado, Fleming Martinez, Mohammad A. Abolghassemi Fakhree, Abolghasem Jouyban, Volumetric properties of glycerol+water mixtures at several temperatures and correlation with the Jouyban-Acree model, Revista Colombiana de Ciencias Quimico-farmaceuticas, 40(1), 2011, 92-115.
  4. Brooks B. Danahy, David L. Minnick, Mark B. Shiflett, Computing the composition of ethanolwater mixtures based on experimental density and temperature measurements, Fermentation 2018, 4, 72. https://doi.org/10.3390/fermentation4030072
  5. Alain Valtz, Mariana Teodorescu, Ivan Wichterle, Dominique Richon, Liquid densities and excess molar volumes for water+diethylene glycolamine, and water, methanol, ethanol, 1-propanol+trieth ylene glycol binary systems at atmospheric pressure and temperatures in the range of 283.15-363.15 K, Fluid Phase Equilibria 215, 2004, 129-142. https://doi.org/10.1016/S0378-3812(03)00364-9
  6. Sanaz Gharehzadeh Shirazi, Fakhri Kermanpour, Density and viscosity of 2-butanol+(1-propanol, 2-propanol, or 3-amino-1-propanol) mixtures at temperatures of (293.15 to 323.15) K: Application of the ERAS model, Journal of Chemical & Engineering Data 64, 2019, 2292-2302. https://doi.org/10.1021/acs.jced.8b01097
  7. Nian-Sheng Cheng, Formula for the viscosity of a glycerol-water mixture, Industrial Engineering and Chemical Research 47, 2008, 3285-3288. https://doi.org/10.1021/ie071349z
  8. J.-W. Lee, S.-B. Park, H. Lee, Densities, surface tensions, and refractive indices of the water+1,3-propanediol system, Journal of Chemical Engineering Data 45, 2000, 166-168. https://doi.org/10.1021/je990196m
  9. Chantaporn Tubtimdee, Artiwan Shotipruk, Extraction of phenolics from Terminalia chebula Retz with water-ethanol and water-propylene glycol and sugaring-out concentration of extracts, Separation and Purification Technology, 77, 2011, 339-346. https://doi.org/10.1016/j.seppur.2011.01.002
  10. Ibrahim S. Khattab, Farzana Bandarkar, Maryam Khoubnasabjafari, Abolghasem Jouyban, Density, viscosity, surface tension, and molar volume of propylene glycol+water mixtures from 293 to 323 K and correlations by the Jouyban-Acree model, Arabian Journal of Chemistry 10, 2017, S71-S75. https://doi.org/10.1016/j.arabjc.2012.07.012
  11. Andreas Volk, Christian J. Kahler, Density model for aqueous glycerol solutions, Experiments in Fluids 59, 2018, 75. https://doi.org/10.1007/s00348-018-2527-y
  12. G. I. Egorov, D. M. Makarov, A. M. Kolker, Volumetric properties of the water-ethylene glycol mixtures in the temperature range 278-333.15 K at atmospheric pressure, Russian Journal of General Chemistry 80, 2010, 1577-1585. https://doi.org/10.1134/S1070363210080074
  13. Begona Gonzalez, Noelia Calvar, Elena Gomez, Angeles Dominguez, Density, dynamic viscosity, and derived properties of binary mixtures of methanol or ethanol with water, ethyl acetate, and methyl acetate at T = (293.15, 298.15, and 303.15) K, Journal of Chemical Thermodynamics 39, 2007, 1578-1588. https://doi.org/10.1016/j.jct.2007.05.004
  14. Christian Dethlefsen, Preben Graae Sorensen, Aase Hvidt, Excess volumes of propanol-water mixtures at 5, 15, and 25℃, Journal of Solution Chemistry 13, 1984, 191-202. https://doi.org/10.1007/BF00645877