DOI QR코드

DOI QR Code

Bond strength of corroded reinforcement in concrete: Neural and tree based approaches

  • Received : 2021.04.12
  • Accepted : 2021.07.05
  • Published : 2021.09.25

Abstract

Reinforcement corrosion affects the existing concrete structures, particularly in the coastal regions. One of the effects of corrosion of reinforcement is degradation of the bond stress that can be developed between the reinforcement and the surrounding concrete and this in turn affects the capacity of the reinforced concrete member. Prediction of the bond stress applicable for the corroded reinforcement has been attempted using analytical, empirical and soft computing methods. This article presents the comparative performance of two data-driven tools, artificial neural network (ANN) and decision tree (DT) for the task of prediction of bond stress from the corrosion level, the compressive strength of concrete and the ratio of cover and diameter of reinforcement bar. From the extensive evaluation of performance with both quantitative and graphical methods, it was concluded that the ANN approach would be better suited for the application, with the available data. For development of the models 8-fold cross validation scheme was adopted due to the limitations of data. The ANN models trained with pull-out test data, when employed with ensemble approach in predictive mode for a different experiment setup and bond strength test (flexural) data, could produce results comparable to ANN models trained with flexural test data (reported in literature). The inclusion of the additional factors (compressive strength of concrete and the ratio of cover and diameter of reinforcement bar), 8-fold cross validation approach, and ensemble prediction could be the possible reasons for achieving such portability of pull-out test based model for prediction of flexural test data.

Keywords

Acknowledgement

The author solemnly acknowledges the contribution of various authors in reproducing the experimental data in their paper, which formed the database for this study. The critical review comments as well as the helpful suggestions received from the anonymous reviewers have contributed towards improvement of the article and they are sincerely appreciated.

References

  1. Ahmad, S. (2014), "An experimental study on correlation between concrete resistivity and reinforcement corrosion rate", Anti-Corros Methods Mater., 61(3), 158-165. https://doi.org/10.1108/ACMM-07-2013-1285
  2. Arslan, M.E. and Pul, S. (2020), "Bond behavior investigation of ordinary concrete-rebar with hinged beam test and eccentric pull-out test", Comput. Concrete, Int. J., 26(6), 587-593. http://dx.doi.org/10.12989/cac.2020.26.6.587
  3. Auyeung, Y., Balaguru, P. and Chung, L. (2000), "Bond behavior of corroded reinforcement bars", ACI Mater. J., 97(2), 214-220.
  4. Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam, S. (2008), "Suggested empirical models for corrosion-induced bond degradation in reinforced concrete", J. Struct. Eng., 134(2), 221-230. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(221)
  5. Bose, N.K. and Liang, P. (1993), Neural Networks Fundamentals with Graphs, Algorithms, and Applications, Tata-McGraw-Hill Publishing Company Limited, New Delhi, India.
  6. Bureau of Indian Standards (BIS) (2000), Plain and Reinforced Concrete - Code of Practice, IS: 456-2000 (Reaffirmed 2005), BIS, New Delhi, India.
  7. Cabrera, J.G. (1996), "Deterioration of concrete due to reinforcement steel corrosion", Cement Concrete Res., 18(1), 47-59. https://doi.org/10.1016/0958-9465(95)00043-7
  8. Cai, B., Wu, A. and Fu, F. (2020), "Bond behavior of PP fiber-reinforced cinder concrete after fire exposure", Comput. Concrete, Int. J., 26(2), 115-125. http://dx.doi.org/10.12989/cac.2020.26.2.115
  9. Chung, L., Cho, S., Kim, J.J. and Yi, S. (2004), "Correction factor suggestion for ACI development length provisions based on flexural testing of RC slabs with various levels of corroded reinforcing bars", Eng. Struct., 26(8), 1013-1026. https://doi.org/10.1016/j.engstruct.2004.01.008
  10. Chung, L. Kim, J.J. and Yi, S. (2008), "Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars", Cement Concrete Compos., 30(7), 603-611. https://doi.org/10.1016/j.cemconcomp.2008.03.006
  11. Dauji, S. (2016a), "Empirical model for evaluation of concrete corrosion current density", Concrete Res. Lett., 7(3), 104-112.
  12. Dauji, S. (2016b), "Prediction of compressive strength of concrete with decision trees", Int. J. Concrete Technol., 2(1), 19-29. https://doi.org/10.37628/ijct.v1i2.79
  13. Dauji, S. (2018a), "Reinforcement corrosion in coastal and marine concrete: A review", Chall. J. Concrete Res. Lett., 9(2), 62-70. https://doi.org/10.20528/cjcrl.2018.02.003
  14. Dauji, S. (2018b), "New approach for identification of suitable vibration attenuation relationship for underground blast", Eng. J., 22(4), 147-159. https://doi.org/10.4186/ej.2018.22.4.147
  15. Dauji, S. (2018c), "Neural prediction of concrete compressive strength", Int. J. Mater. Struct. Integrit., 12(1/2/3), 17-35. http://dx.doi.org/10.1504/IJMSI.2018.10014931
  16. Dauji, S. (2019a), "Estimation of corrosion current density from resistivity of concrete with neural network", INAE Lett., 4(1), 111-121. https://doi.org/10.1007/s41403-019-00071-z
  17. Dauji, S. (2019b), "Estimation of capacity of eccentrically loaded single angle struts with decision trees", Chall. J. Struct. Mech., 5(1), 1-8. https://doi.org/10.20528/cjsmec.2019.01.001
  18. Dauji, S. (2020a), "Prediction of concrete spall damage under blast: Neural approach with synthetic data", Comput. Concrete, Int. J., 26(6), 533-546. https://doi.org/10.12989/cac.2020.26.6.533
  19. Dauji, S. (2020b), "Prediction accuracy of underground blast variables: decision tree and artificial network", Int. J. Earthq. Impact Eng., 3(1), 40-59. https://doi.org/10.1504/IJEIE.2020.105382
  20. Dauji, S. (2021), "Re-look into Modified Scaled Distance Regression Analysis Approach for Prediction of Blast-induced Ground Vibration", Int. J. Geotech. Earthq. Eng., 12(1), 22-39. https://doi.org/10.4018/IJGEE.2021010103
  21. Dauji, S. and Bhargava, K. (2016), "Estimation of corrosion induced bond strength degradation in concrete with artificial neural networks", Paper No. 27, Proceedings of International Corrosion Conference and Expo (CORCON 2016), New Delhi, India, September.
  22. Dauji, S. and Bhargava, K. (2018), "Neural estimation of bond strength degradation in concrete affected by reinforcement corrosion", INAE Letters, 3, 203-215. https://doi.org/10.1007/s41403-018-0050-3
  23. Dauji, S. and Deo, M.C. (2020), "Improving numerical current prediction with model tree", Indian J. Geo Marine Sci., 49(08), 1350-1358.
  24. Deng, F. He, Y. Zhou, S. Yu, Y. Cheng, H. and Wu, X. (2018), "Compressive strength prediction of recycled concrete based on deep learning", Constr. Build. Mater., 175, 562-569. https://doi.org/10.1016/j.conbuildmat.2018.04.169
  25. Fu, C. Fang, D. Ye, H. Huang, L. and Wang, J. (2021), "Bond degradation of non-uniformly corroded steel rebars in concrete", Eng. Struct., 226, 111392. https://doi.org/10.1016/j.engstruct.2020.111392
  26. Guo, Z., Ma, Y., Wang, L., Zhang, X., Zhang, J., Hutchinson, C. and Harik, I.E. (2020), "Crack propagation-based fatigue life prediction of corroded RC beams considering bond degradation", ASCE J. Bridge Eng., 25(8), 04020048. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001592
  27. Haykin, S.O. (2008), Neural Networks and Machine Learning, Pearson Education, New Delhi, India.
  28. Hodhod, O.A. and Ahmed, H.I. (2014), "Modeling the corrosion initiation time of slag concrete using the artificial neural network", HBRC J., 10, 231-234. https://doi.org/10.1016/j.hbrcj.2013.12.002
  29. Huang, L. Jin, X., Fu, C., Ye, H. and Dong, X. (2020), "Stochastic characteristics of reinforcement corrosion in concrete beams under sustained loads", Comput. Concrete, Int. J., 25(5), 447-460. http://dx.doi.org/10.12989/cac.2020.25.5.447
  30. Huang, Y., Zhang, H., Li, H. and Wu, S. (2021), "Recovering compressed images for automatic crack segmentation using generative models", Mech. Syst. Signal Process., 146(107061), 1-17. https://doi.org/10.1016/j.ymssp.2020.107061
  31. Ito, Y., Kurihara, R. and Chijiwa, N. (2021), "The Influence of the Deterioration of Concrete-Rebar Bond Due to Corrosion on the Structural Performance of RC Structures", In: Wang, C.M., Dao, V., Kitipornchai, S. (eds.) EASEC16. Lecture Notes in Civil Engineering, 101, Springer, Singapore. https://doi.org/10.1007/978-981-15-8079-6_162
  32. Jekabsons, G. (2016), M5PrimeLab: M5' regression tree, model tree, and tree ensemble toolbox for Matlab/Octave. ; Accessed 08.05.2016.
  33. Jiradilok, P., Wang Y., Nagai, K. and Matsumoto, K. (2020), "Development of discrete meso-scale bond model for corrosion damage at steel-concrete interface based on tests with/without concrete damage", Constr. Build. Mater., 236, 117615. https://doi.org/10.1016/j.conbuildmat.2019.117615
  34. Lee, H., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cement Concrete Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4
  35. Lin, H. and Zhao, Y. (2016), "Effects of confinements on the bond strength between concrete and corroded steel bars", Constr. Build. Mater., 118, 127-138. http://dx.doi.org/10.1016/j.conbuildmat.2016.05.040
  36. Lin, Y.Z., Nie, Z.H. and Ma, H.W. (2017), "Structural damage detection with automatic feature-extraction through deep learning", Comput.-Aid. Civil Infrastr. Eng., 32(12), 1025-1046. https://doi.org/10.1111/mice.12313
  37. Liu, H., Ding, Y.L., Zhao, H.W., Wang, M.Y. and Geng, F.F. (2020), "Deep learning-based recovery method for missing structural temperature data using LSTM network", Struct. Monitor. Maint., Int. J., 7(2), 109-124. http://dx.doi.org/10.12989/smm.2020.7.2.109
  38. Nasser, H., Steen, C.V., Vandewalle, L. and Verstrynge, E. (2021), "An experimental assessment of corrosion damage and bending capacity reduction of singly reinforced concrete beams subjected to accelerated corrosion", Constr. Build. Mater., 286, 122773. https://doi.org/10.1016/j.conbuildmat.2021.122773
  39. Parthiban, T., Ravi, R., Parthiban, G.T., Srinivasan, S., Ramakrishnan, K.R. and Raghavan, M. (2005), "Neural network analysis for corrosion of steel in concrete", Corros. Sci., 47, 1625-1642. https://doi.org/10.1016/j.corsci.2004.08.011
  40. Quinlan, J.R. (1992), C4.5: Programs for Machine Learning, Morgan Kaufmann, San Francisco, CA, USA.
  41. Rafi, A., Dauji, S. and Bhargava, K. (2020), Estimation of SPT from Coarse Grid Data by Spatial Interpolation Technique, In: Gali, M.L. and P. R.R. (eds.), Geotechnical Characterization and Modelling, Lecture Notes in Civil Engineering 85, Springer Nature, Singapore, pp. 1079-1091. https://doi.org/10.1007/978-981-15-6086-6_87
  42. Ramachandra, R. and Mandal, S. (2020), "Prediction of fly ash concrete compressive strengths using soft computing techniques", Comput. Concrete, Int. J., 25(1), 83-94. http://dx.doi.org/10.12989/cac.2020.25.1.083
  43. Ray, S. and Dauji, S. (2019), "Ground vibration attenuation relationship for underground blast: a case study", J. Inst. Engr. (India) Series A, 100, 763-775. https://doi.org/10.1007/s40030-019-00382-y
  44. Rokach, L. and Maimon, O. (2015), Data Mining with Decision trees: Theory and Applications, World Scientific, Singapore.
  45. Sadowski, L. (2013), "Non-destructive investigation of corrosion current density in steel reinforced concrete by artificial neural networks", Arch. Civil Mech. Eng., 13, 104-111. https://doi.org/10.1016/j.acme.2012.10.007
  46. Stanish, K., Hooton, R.D. and Pantazopoulou, S.J. (1999), "Corrosion effects on bond strength in reinforced concrete", ACI Struct. J., 96(6), 915-921.
  47. Topcu, I.B., Boga, A.R. and Hocaoglu, F.O. (2009), "Modeling corrosion currents of reinforced concrete using ANN", Autom Constr., 18, 145-152. https://doi.org/10.1016/j.autco n.2008.07.004
  48. Vanama, R.K. and Ramakrishnan, B. (2020), "Improved degradation relations for the tensile properties of naturally and artificially corroded steel rebars", Constr. Build. Mater., 249, 118706. https://doi.org/10.1016/j.conbuildmat.2020.118706
  49. Wasserman, P.D. (1993), Advanced Methods in Neural Computing, Van Nostrand Reinhold Company, New York, USA.
  50. Witten, I.H. and Frank, E. (2000), Data Mining: Practical Machine Learning Tools and Techniques, Morgan Kaufmann, San Francisco, CA, USA.
  51. Wu, K., Zheng, H., Lin, J., Li, H. and Zhao, J. (2020), "Interfacial bond properties and comparison of various interfacial bond stress calculation methods of steel and steel fiber reinforced concrete", Comput. Concrete, Int. J., 26(6), 515-531. http://dx.doi.org/10.12989/cac.2020.26.6.515
  52. Yalciner, H., Eren, O. and Sensoy, S. (2012), "An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level", Cement Concrete Res., 42, 643-655. https://doi.org/10.1016/j.cemconres.2012.01.003
  53. Zhang, L., Yang, F., Zhang, Y.D. and Zhu, Y.J. (2016), "Road crack detection using deep convolutional network", Proceedings of IEEE International Conference on Image Processing ICIP 2016, pp. 3708-3712.
  54. Zhang, Z., Sun, C., Li, C. and Sun, M. (2019), "Vibration based bridge scour evaluation: A data-driven method using support vector machines", Struct. Monitor. Maint., Int. J., 6(2), 125-145. http://dx.doi.org/10.12989/smm.2019.6.2.125
  55. Zhang, B., Zhu, H., Chen, J. and Yang, O. (2020), "Influence of specimen dimensions and reinforcement corrosion on bond performance of steel bars in concrete", Adv. Struct. Eng., 23(9), 1759-1771. https://doi.org/10.1177/1369433219900682