DOI QR코드

DOI QR Code

Evaluation of a new proposed seismic isolator for masonry walls

  • Kakolvand, Habibollah (Department of Civil Engineering, College of Engineering, West Tehran Branch, Islamic Azad University) ;
  • Ghazi, Mohammad (Department of Civil Engineering, College of Engineering, West Tehran Branch, Islamic Azad University) ;
  • Mehrparvar, Behnam (Department of Civil Engineering, College of Engineering, West Tehran Branch, Islamic Azad University) ;
  • Parvizi, Soroush (Department of Materials Engineering, Shahid Rajaee Teacher Training University (SRTTU))
  • 투고 : 2020.10.06
  • 심사 : 2021.08.27
  • 발행 : 2021.10.25

초록

Masonry structures are relatively inexpensive and easier to construct compared to other types of structures such as steel and reinforced concrete buildings. However, they are relatively heavier, less ductile, and more vulnerable to damages in earthquakes. In this research, a new proposed low-cost seismic isolator made of rubber and steel rings (SISR) was used to reduce the seismic vulnerability of masonry walls. Two specimens of the proposed SISR were fabricated (placed on top of each other) and tested for horizontal displacement under a fixed vertical load condition according to ASCE 7-16 loading protocol. The proposed SISRs which out-performed the standard loading protocol of ASCE 7-16 were evaluated in a numerical study of the concrete block walls under Erzincan and Imperial Valley-06 earthquakes. ABAQUS finite element software was used for the structural modeling of the walls. The results showed the proper performance of the proposed SISRs in reducing the acceleration and preventing cracks in the masonry walls.

키워드

과제정보

This study is part of a Ph.D. research of the first author under the supervision of the second to fourth authors. The SISR tests were carried out at the strong floor laboratory of the structures division of the Road, Housing, and Urban Development Research Center of Iran. The authors wish to express their thanks to Mr. Mehdi Abbasi and Mr. Reza Nooshabadi, engineering operators of the laboratory, for facilitating all the means in carrying out the experiments.

참고문헌

  1. Abdel-Hafez, L.M., Abouelezz, A.E.Y. and Elzefeary, F.F. (2015), "Behavior of masonry strengthened infilled reinforced concrete frames under in-plane load", HBRC J., 11(2), 213-223. https://doi.org/10.1016/j.hbrcj.2014.06.005.
  2. Ahmad, S., Ghani, F. and Raghib Adil, M. (2009), "Seismic friction base isolation performance using demolished waste in masonry housing", Construct. Build. Mater., 23(1), 146-152. https://doi.org/10.1016/j.conbuildmat.2008.01.012.
  3. Ahmadipour, M. and Alam, M.S. (2017), "Sensitivity analysis on mechanical characteristics of lead-core steel- reinforced elastomeric bearings under cyclic loading", Eng. Struct., 140, 39-50. https://doi.org/10.1016/j.engstruct.2017.02.014.
  4. Artar, M., Coban, K., Yurdakul, M., Canb, O., Yilmaz, F. and Yildiz, M. (2019), "Investigation on seismic isolation retrofit of a historical masonry structure", Earthq. Struct., 16(4), 501-512. https://doi.org/10.12989/eas.2019.16.4.501.
  5. ASCE 7-16 (2016), Building Code Minimum Design Loads and Associated Criteria for Buildings and Other Structures, American Society of Civil Engineers, ASCE, Reston, Virginia 20191, U.S.A.
  6. Asl, M.J., Rahman, M.M. and Karbakhsh, A. (2014), "Numerical analysis of seismic elastomeric isolation bearing in the base-isolated buildings", Open J. Earthq. Res., 2014(3), 1-4. https://doi.org/10.4236/ojer.2014.31001.
  7. Aykac, B., Kalkan, I. and Bocek, M. (2016), "The out-of-plane bending behavior of brick infill walls strengthened with perforated steel plates", Ingenieria, Investigacion y Tecnologia, 17(4), 429-435. http://dx.doi.org/10.1016/j.riit.2016.11.002.
  8. Cancellara, D. and De Angelis, F. (2016), "A base isolation system for structures subject to extreme seismic events characterized by anomalous values of intensity and frequency content", Compos. Struct., 157, 285-302. http://dx.doi.org/10.1016/j.compstruct.2016.09.002.
  9. Cardoso, R., Lopes, M. and Bento, R. (2005), "Seismic evaluation of old masonry buildings. Part I: Method description and application to a case-study", Eng. Struct., 27(14), 2024-2035. https://doi.org/10.1016/j.engstruct.2005.06.012.
  10. Chen, Y. and Ahmadi, G. (1994), "Performance of a high damping rubber bearing base isolation system for a shear beam structure", Earthq. Eng. Struct. Dyn., 23(7), 729-744. https://doi.org/10.1002/eqe.4290230704.
  11. Dumova-Jovanoska, E. and Churilov, S. (2009), "Calibration of a numerical model for masonry with application to experimental results", Proceedings of the First Int. Conference PROHITECH 09, Rome, Italy, June.
  12. Fan, F.G, Ahmadi.G, Mostaghel.N and Tadjbakhsh.G. (1991), "Performance analysis of aseismic base isolation systems for a multi-story building", Soil Dyn. Earthq. Eng., 10(3), 152-171. https://doi.org/10.1016/0267-7261(91)90029-Y.
  13. Galano, L. and Gusella, V. (1998), "Reinforcement of masonry walls subjected to seismic loading using steel x-bracing", J. Struct. Eng, 124(8), 886-895. https://doi:10.1061/(ASCE)0733-9445(1998)124:8(886).
  14. Habieb, A.B., Milani, G., Tavio, T. and Milani, F. (2017), "Numerical model of low cost rubber isolators for masonry housing in high seismic regions", Int. J. Civil Environ. Eng., 11(5), 664-670. https://doi.org/10.5281/zenodo.1130579.
  15. Islam, A.B.M.S., Jameel, M. and Jumaat, M.Z. (2011) ), "Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique", J. Eng. Technol. Res, 3(4), 99-117.
  16. Islam, A.B.M.S., Ahmad,S.I., Mohammed, J. and Jumaat, M.Z. (2012), "Seismic base isolation for buildings in regions of low to moderate seismicity: Practical alternative design", Practice Periodic. Struct. Des. Construct., 17(1), 13-20. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000093.
  17. Kelly, J.M. (1986), "Aseismic base isolation: review and bibliography", Soil Dyn. Earthq. Eng., 5(4), 202-216. https://doi.org/10.1016/0267-7261(86)90006-0.
  18. Kelly, J.M. and Aiken, I.D. (1991) ), "Experimental studies of the seismic response of structures incorporating base-isolation systems", Nuclear Eng. Des., 127(3), 329-338. https://doi.org/10.1016/0029-5493(91)90057-O.
  19. Kelly, J.M. and Takhirov, S.M. (2007), "Tension buckling in multilayer elastomeric isolation", Mech. Mater. Struct., 2(8), 1591-1605. http://dx.doi.org/10.2140/jomms.2007.2.1591.
  20. Koh, C.G. and Kelly, J.M. (1988), "A simple mechanical model for elastomeric bearings used in base isolation", Int. J. Mech. Sci., 30(12), 933-943. https://doi.org/10.1016/0020-7403(88)90075-6.
  21. Lourenco, P.B. (1994), Analysis of Masonry Structures with Interface Elements, Research Report No. 03-21-22-0-01; TNO Building and Construction Research, Computational Mechanics, Delft University of Technology, Faculty of Civil Engineering.
  22. Mkrtychev, O.V., Dzhinchvelashvili, G.A. and Bunov, A.A. (2014) ), "Study of lead rubber bearings operation with varying height buildings at earthquake", Procedia Eng., 91(2014), 48-53. https://doi.org/10.1016/j.proeng.2014.12.010.
  23. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons, Chichester, U.K.
  24. Nair, A.U., Lobo, H. and Bestelmeyer, A.M. (2009), "Characterization of damage in hyperelastic materials using standard test methods and abaqus", Conference proceedings - 2009 SIMULIA Customer, London, England, May.
  25. Pela, L., Aprile, A. and Benedetti, A. (2009), "Seismic assessment of masonry arch bridges", Eng. Struct., 31(8), 1777-1788. https://doi.org/10.1016/j.engstruct.2009.02.012.
  26. Rahman Bhuiyan, A. and Alam, M.S. (2013), "Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing", Eng. Struct., 49, 396-407. https://doi.org/10.1016/j.engstruct.2012.11.022.
  27. Ramos, L.F. and Lourenco, P.B. (2004), "Modeling and vulnerability of historical city centers in seismic areas: A case study in Lisbon", Eng. Struct., 26(9), 1295-1310. https://doi.org/10.1016/j.engstruct.2004.04.008.
  28. Schneider, S. and Favieri, S. (1996), "Lateral strength of brick cladded steel frames", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June.
  29. Shahzad, M., Kamran, A., Siddiqui, M.Z and Farhan, M. (2015), "Mechanical Characterization and FE Modelling of a Hyperelastic Material", Mater. Res., 18(5), 918-924. https://doi.org/10.1590/1516-1439.320414
  30. Sharbatdar, M.K., Hoseini Vaez, S.R., Ghodrati Amiri, G. and Naderpour, H. (2011), "Seismic response of base-isolated structures with LRB and FPS under near fault ground motions", Procedia Engineering, 14, 3245-3251. https://doi.org/10.1016/j.proeng.2011.07.410.
  31. Shatnawi, A.S., Najmi, A.S., Abdel-Jaber, M.S.and Amareen, A.M. (2008) ), " Non-linear seismic response of base-isolated frame structures using rubber bearings", Jordan J. Civil Eng., 2(2), 152-171.
  32. Tong, M., Mao, F. and Qiu, H. (2011), "Structural stability analysis for truss bridge", Procedia Eng., 16, 546-553. https://doi.org/10.1016/j.proeng.2011.08.1123
  33. Tiberti, S., Acito, M. and Milani, G. (2016), "Comprehensive FE numerical insight into Finale Emilia Castle behavior under 2012 Emilia Romagna seismic sequence: Damage causes and seismic vulnerability mitigation hypothesis", Eng. Struct., 117, 397-421. https://doi.org/10.1016/j.engstruct.2016.02.048.
  34. Yang, Z.R., Shou, B.N., Sun, N. and Wang, J.J. (2011), "Earthquake response analysis of spherical tanks with seismic isolation", Procedia Eng., 14, 1879-1886. https://doi.org/10.1016/j.proeng.2011.07.236.