DOI QR코드

DOI QR Code

Seismic performance assessment of pre-engineered steel buildings on the west coast of Canada

  • Bagatini-Cachuco, Fabricio (Department of Civil Engineering, The University of British Columbia) ;
  • Yang, T.Y. (Department of Civil Engineering, The University of British Columbia)
  • 투고 : 2021.01.26
  • 심사 : 2021.09.25
  • 발행 : 2021.11.10

초록

This paper focuses on the seismic performance of typical pre-engineered steel buildings (PSB) on the west coast of Canada. PSB are widely adopted for commercial and industrial long span low-rise constructions. Their structural system consists of a moment resisting frame made of built-up tapered I-beam elements, which often have slender and/or non-compact sections to minimize steel consumption. Typical seismic design of PSB consists of elastic analysis with force reduction factors (FRF) that assume some ductility. However, failure mechanisms in PSB are usually governed by flange local buckling and lateral torsional buckling, which might not provide the expected ductility. This paper presents an extensive series of numerical analyses to evaluate the seismic performance of four PSB prototypes designed for the city of Victoria on the west coast of Canada. Prototypes have similar general dimensions, while members' sizes vary due to usage of different FRF. A finite element model (FEM) has been calibrated based on experiments to capture the post-buckling response of tapered built-up steel elements under cyclic load. Furthermore, seismic performance of each PSB prototype has been assessed with incremental dynamic analysis procedure. Structural characteristics, such as ductility and overstrength, are identified. In addition, the prototypes' probability of collapse is assessed under a set of 33 ground motions from multiple sources of hazard. The resultant collapse margin ratio is compared with the acceptance criterion per FEMA P695 recommendation. The study concludes proposing FRF=1.3 for the efficient design PSB on the west coast of Canada.

키워드

과제정보

The authors would like to acknowledge the funding provided by the Canadian Steel Sheet Building Institute (CSSBI), Natural Sciences and Engineering Research Council (NSERC), Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) and National Science Foundation China (51778486). The authors would also like to acknowledge the collaboration provided by the Metal Building Manufacturers Association (MBMA) and by the Eng. Dennis Bak from Steelway Buildings Systems. Any opinions, findings, and conclusions or recommendations expressed in this paper are those of the authors.

참고문헌

  1. Abrahamson, N., Gregor, N. and Addo, K. (2016), "BC Hydro ground motion prediction equations for subduction earthquakes", Earthq. Spectra, 32(1), 23-44. http://doi.org/10.1193/051712EQS188MR.
  2. ASCE 7 (2017), Minimum design loads and associated criteria for buildings and other structures, American Society of Civil Engineers; Reston, United States.
  3. Ashtari, S. (2018), "Evaluating the performance-based seismic design of RC bridges according to the 2014 Canadian highway bridge design code", Ph.D. Dissertation, The University of British Columbia, Vancouver, Canada.
  4. Atkinson, G.M. and Adams, J. (2013), "Ground motion prediction equations for application to the 2015 Canadian national seismic hazard maps", Can. J. Civil Eng., 40(10), 988-998. https://doi.org/10.1139/cjce-2012-0544.
  5. Baker, J. (2020), Ground Motion Model Functions; Stanford University, Stanford, United States. https://web.stanford.edu/~bakerjw/GMPEs.html.
  6. Baker, J.W. and Cornell, C.A. (2006), "Spectral shape, epsilon and record selection", Earthq. Eng. Struct. D., 35(9), 1077-1095. https://doi.org/10.1002/eqe.571.
  7. Behlen Steel Buildings (2020), Rigid Frame Steel Buildings; Behlen Industries LP, Brandon, Canada. http://behlen.ca/building-type/industrial/.
  8. Boore, D.M. and Atkinson G.M. (2008), "Ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5%-damped PSA at spectral periods between 0.01 s and 10.0 s", Earthq. Spectra, 24(1), 99-138. https://doi.org/10.1193/1.2830434.
  9. Bruneau, M., Uang, C. and Sabelli R. (2011), Ductile Design of Steel Structures, (2nd Edition), McGraw-Hill, New York, United States.
  10. CSA-S16-14 (2014), Design of steel structures, Canadian Standards Association; Toronto, Canada.
  11. Cornell, C.A. (1968), "Engineering seismic risk analysis", Bull. Seismol. Soc. Am., 58(5), 1583-1606. https://doi.org/10.1785/BSSA0580051583
  12. Dassault Systemes Simulia (2013), Abaqus 6.12, Dassault Systemes Simulia Corp, Velizy-Villacoublay, France.
  13. Eads, L., Miranda, E. and Lignos, D. (2016), "Spectral shape metrics and structural collapse potential", Earthq. Eng. Struct. D., 45(10), 1643-1659. https://doi.org/10.1002/eqe.2739.
  14. Estrella, X., Guindos, P. and Almazan, J.L. (2019), "Ground motions for FEMA P-695 application in subduction zones", Latin Am. J. Solid. Struct., 16(9). http://doi.org/10.1590/1679-78255848.
  15. Eurocode 8-1 (2004), Design of structures for earthquake resistance - part 1: general rules, seismic actions and rules for buildings, European Committee for Normalization; Brussels, Belgium.
  16. FEMA P695 (2009), Quantification of building seismic performance factors, Federal Emergency Management Agency; Redwood City, United States.
  17. Halchuk, S., Allen, S., Adams, T.I. and Rogers, G.C. (2014), "Fifth generation seismic hazard model input files as proposed to produce values for the 2015 National Building Code of Canada", Proceedings of the 11th Canadian Conference on Earthquake Engineering, Victoria, Canada, July.
  18. Hong, J.K. (2007), "Development of a seismic design procedure for metal building systems", Ph.D. Dissertation, University of California, San Diego, United States.
  19. Hong, J.K. and Uang, C.M. (2012), "Cyclic testing of a metal building moment frame system with web-tapered members", J. Constr. Steel Res., 70, 248-255. https://doi.org/10.1016/j.jcsr.2011.09.005.
  20. Jennings, P.C. and Husid, R. (1968), "Collapse of yielding structures during earthquakes", J. Eng. Mech. Division, 94(5), 1045-1066. https://doi.org/10.1061/JMCEA3.0001023
  21. Kaehler, S.C., White, D.W. and Kim, Y.D. (2011), "Steel design guide 25: frame design using web-tapered members", American Institute of Steel Construction; Chicago, United States.
  22. Kaufmann, E.J., Metrovich, B. and Pense, A.W. (2001), "Characterization of cyclic inelastic strain behavior on properties of A572 Gr. 50 and A913 Gr. 50 rolled sections", Advanced Technology For Large Structural Systems, Lehigh University; Bethlehem, United States.
  23. Krawinkler, H. (1978), "Shear in beam-column joints in seismic design of steel frames", Eng. J., 15, 82-91.
  24. Laiman, B. (2014), "Web-tapered steel beam-column elements for nonlinear analysis with cyclic loading", M.Sc. Dissertation, University of California, San Diego, United States.
  25. Lee, K. and Foutch, D.A. (2002), "Performance evaluation of new steel frame buildings for seismic loads", Earthq. Eng. Struct. D., 31(3), 653-670. https://doi.org/10.1002/eqe.147.
  26. Lee, S.H., Kim, Y.H. and Choi, S.M. (2015), "Ultimate strength of long-span buildings with P.E.B (Pre-Engineered Building) system", Steel Compos. Struct., 19(6), 1483-1499. https://doi.org/10.12989/scs.2015.19.6.1483.
  27. Maison, B.F., Kasai, K. and Deierlein, G. (2009), "ASCE-41 and FEMA-351 evaluation of E-Defense collapse test", Earthq. Spectra, 25(4), 927-953. https://doi.org/10.1193/1.3224159.
  28. McGuire, R.K. (1976), "FORTRAN computer program for seismic risk analysis", Open-File Report 76-67, United States Geological Survey; Reston, United States. https://doi.org/10.3133/ofr7667.
  29. McKenna, F., Fenves, G. and Scott, M. (2000), Open System for Earthquake Engineering Simulation, University of California, Berkeley, United States.
  30. Meimand, V., Moen, C. and Schafer, B. (2018), "Examination of seismic response modification coefficients for metal building systems with FEMA P695 process", Proceedings of the Eleventh U.S. National Conference on Earthquake Engineering, Los Angeles, United States, June.
  31. NBCC 2015 (2015), National building code of Canada 2015, National Research Council; Ottawa, Canada.
  32. Newman, A. (2004), Metal Building Systems: Design And Specifications, (2nd Ed.), McGraw-Hill, New York, United States.
  33. Onur, T. (2001), "Seismic risk assessment in southwestern British Columbia", PhD. Dissertation, The Univesrity of British Columbia, Vancouver, Canada.
  34. PEER (2020), PEER Ground Motion Database, University of California, Berkeley, United States. http://ngawest2.berkeley.edu/.
  35. Qayyum, B., Eatherton M. and Easterling S. (2018), "Seismic behavior of one story steel buildings with inelastic diaphragms", Proceedings of the Eleventh U.S. National Conference on Earthquake Engineering, Los Angeles, United States, June.
  36. Rankin, G.I.B., Leinster, J.C. and Robinson, D.J. (2009), "Novel loading tests on full-scale tapered member portal frames", Struct. Build., 162(3), 151-159. https://doi.org/10.1680/stbu.2009.162.3.151.
  37. Risk Engineering (2018), EZ-FRisk Version 7.65, Fugro USA Land Inc., Walnut Creek, United States.
  38. S2GM (2020) Selection and Scaling of Ground Motions; High Performance Computing for Performance-based Design, Vancouver, Canada. http://s2gm.hpcperformancedesign.com/.
  39. SAC Joint Venture (1997), "Protocol for fabrication, inspection, testing and documentation of beam-column connection and other experimental specimens", Report No. SAC/BD-97/02, Sacramento, US.
  40. Saleem, M. and Qureshi, H. (2018), "Design solutions for sustainable construction of pre engineered steel buildings", Sustainability, 10(6). https://doi.org/10.3390/su10061761.
  41. Shi, Y. and Chen, Y.Y. (2012), "Weak panel zone design in steel gabled frames", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  42. Shi, Y., Wang M. and Wang, Y. (2011), "Experimental and constitutive model study of structural steel under cyclic loading", J. Constr. Steel Res., 67(8), 1185-1197. https://doi.org/10.1016/j.jcsr.2011.02.011.
  43. Smith, M.D. (2013), "Seismic testing and analytical studies for the development of new seismic force resisting systems for metal buildings", Ph.D. Dissertation, University of California, San Diego, United States.
  44. Su, M., Wang, H., Wang, Z. and Wang, F. (2017), "Shaking table tests on steel portal frames consisting of non-compact tapered members", J. Constr. Steel Res., 128, 473-482. https://doi.org/10.1016/j.jcsr.2016.09.009.
  45. Subramanian, L. and White, D.W. (2017), "Resolving the disconnects between lateral torsional buckling experimental tests, test simulations and design strength equations", J. Constr. Steel Res., 128, 321-334. https://doi.org/10.1016/j.jcsr.2016.08.009.
  46. Villaverde, R. (2007), "Methods to assess the seismic collapse capacity of building structures: state of the art", J. Struct. Eng., 133(1), 57-66. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(57).
  47. Xu, Y., Chen, Y., Cheng, X., Tong, L. and Lin. X. (2010), "Experimental research on hysteretic behavior of light-weight steel portal frame", Adv. Mater. Res., 368, 206-210. https://doi.org/10.4028/www.scientific.net/AMR.368-373.206.