DOI QR코드

DOI QR Code

Investigation of the durability performance of FRP bars in different environmental conditions

  • Aydin, Ferhat (Civil Engineering, Faculty of Technology, Sakarya University of Applied Sciences) ;
  • Arslan, Seymanur (Civil Engineering, Faculty of Engineering Arcitercture and Design, Bartin University)
  • 투고 : 2021.03.20
  • 심사 : 2021.08.25
  • 발행 : 2021.10.25

초록

In recent years, Fibers Reinforced Polymer (FRP) bars with high tensile strength and lightness have been developed as an alternative to steel bars and it is important to know the durability performance of these bars against environmental effects. In this study, experimental studies were conducted to evaluate the durability performance of FRP bars produced with various fibers. Five environmental conditions representing humidity, sea water, hot air, cold air and concrete pore water to which the bars may be exposed were created and aramid, glass and carbon fiber FRP bars were exposed to these environments. After conditioning, the water absorption, mass loss and tensile strength of the samples were determined. At the end of the study, it was determined that Glass Fiber Reinforced Polymer (GFRP) bars were greatly affected by the presence of water, Aramid Fiber Reinforced Polymer (AFRP) bars were sensitive to high temperatures, and Carbon Fiber Reinforced Polymer (CFRP) bars showed good performance in all environmental conditions.

키워드

과제정보

We would like to express our gratitude to the Scientific Research Projects Coordinatorship of Sakarya University of Applied Sciences for supporting this study.

참고문헌

  1. ACI Committee 544 (1988), "Desing considerations for steel fiber feinforced concrete", ACI Struct. J., 18.
  2. ACI Committee 440 (2006), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, ACI 440.1R-06, American Concrete Institute, Farmington Hill, Michigan, USA.
  3. ACI 440.1R-03 (2003), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, American Concrete Institute, Detroit, Michigan, USA.
  4. ACI 440.2R-02 (2002), Design and Construction of Externally Bonded FRP Systems for Strength-Ening Concrete Structures, American Concrete Institute, Detroit, Michigan, USA.
  5. ASTM International (2012), ASTM D7705-12, Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction (D7705/D7705M-12), 1-5.
  6. Al-Tamimia, A., Abed, F.H. and Al-Rahmani, A. (2014), "Effects of harsh environmental exposures on the bond capacity between concrete and GFRP reinforcing bars", Adv. Concrete Constr., 2(1), 1-11. http://doi.org/10.12989/acc.2014.2.1.001.
  7. Aydin, F. (2018), "Experimental investigation of thermal expansion and concrete strength effects on FRP bars behavior embedded in concrete", Constr. Build. Mater., 163, 1-8. https://doi.org/10.1016/j.conbuildmat.2017.12.101.
  8. Aydin, F. (2019), "Experimental study on the flexural behaviour of a novel concrete filled hybrid beams reinforced with GFRP and steel bars", KSCE J. Civil Eng., 23(11), 4710-4717. https://doi.org/10.1007/s12205-019-1714-6.
  9. Aydin, E., Boru, E. and Aydin, F. (2021), "Effects of FRP bar type and fiber reinforced concrete on the flexural behavior of hybrid beams", Constr. Build. Mater., 279, 122407. https://doi.org/10.1016/j.conbuildmat.2021.122407.
  10. Adhikari, S. (2009), "Mechanical properties and flexural applications of basalt fiber reinforced polymer (BFRP) bars", Ph.D. Dissertation of Philosophy, University of Akron.
  11. Altalmas, A., El Refai, A. and Abed, F. (2015), "Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions", Constr. Build. Mater., 81, 162-171. https://doi.org/10.1016/j.conbuildmat.2015.02.036.
  12. Benmokrane, B., Ali, A.H., Mohamed, H.M. and ElSafty, A. (2017), "Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures", Compos. Part B, 114, 163-174. https://doi.org/10.1016/j.compositesb.2017.02.002.
  13. CAN/CSA S806-02 (2009), Design and Construction of Building Components with Fibre-Reinforced Polymers, Canadian Standards Association, Canada.
  14. Ceroni, F., Cosenza, E., Gaetano, M. and Pecce, M. (2006), "Durability issues of FRP rebars in reinforced concrete members", Cement Concrete Compos., 28(10), 857-868. https://doi.org/10.1016/j.cemconcomp.2006.07.004.
  15. Chen Y. (2007), "Accelerated ageing tests and long-term prediction models for durability of FRP bars in concrete", Ph.D. Dissertation of Philosophy, West Virginia University, West Virginia.
  16. Chen, Y., Davalos, J.F. and Ray, I. (2006), "Durability prediction for GFRP reinforcing bars using short-term data of accelerated aging tests", J. Compos. Constr., 10(4), 279-86. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:4(279).
  17. Chin, J.W., Hughes, W.L. and Signor, A. (2001), "Elevated temperature aging of glass fiber reinforced vinyl ester and isophthalic polyester composites in water, salt water, and concrete pore solution", Am. Soc. Compos. 16th Tech. Conf., Blacksburg, September.
  18. Coomarasamy, A. and Goodman, S. (1999), "Investigation of the durability characteristics of Fiber Reinforced Plastic (FRP) materials in concrete environment", J. Thermoplast. Compos. Mater., 12(3), 214-226. https://doi.org/10.1177/089270579901200305.
  19. D'Antino, T. and Pisani, M.A. (2018), "Influence of sustained stress on the durability of glass FRP reinforcing bars", Constr. Build. Mater., 187, 474-486. https://doi.org/10.1016/j.conbuildmat.2018.07.175.
  20. D'Antino, T., Pisani, M.A. and Poggi, C. (2018), "Effect of the environment on the performance of GFRP reinforcing bars", Compos. Part B: Eng., 141, 123-136. https://doi.org/10.1016/j.compositesb.2017.12.037.
  21. D'Antino, T. and Pisani, M.A. (2019), "Long-term behavior of GFRP reinforcing bars", Compos. Struct., 227, 1. https://doi.org/10.1016/j.compstruct.2019.111283.
  22. Gibhardt, D., Doblies, A., Meyer, L. and Fiedler, B. (2019), "Effects of hygrothermal ageing on the interphase, fatigue, and mechanical properties of glass fibre reinforced epoxy", Fiber., 7(6), 55. https://doi.org/https://doi.org/10.3390/fib7060055.
  23. El Refai, A., Abed, F. and Altalmas, A. (2015), "Bond durability of basalt fiber-reinforced polymer bars embedded in concrete under direct pullout conditions", J. Compos. Constr., 19, 5. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000544.
  24. Gulsan, M.E., Mohammedameen, A., Sahmaran, M., Nis, A., Alzeebaree, R. and Cevik, A. (2018), "Effects of sulphuric acid on mechanical and durability properties of ECC confined by FRP fabrics", Adv. Concrete Constr., 6(2), 199-220. https://doi.org/10.12989/acc.2018.6.2.199.
  25. Liao, K., Schlthseisz, C.R., Hunston, D.L. and Brinson, L.C. (1998), "Long-term durability of FRP-matrix composite materials for infrastructure applications: A Review", J. Adv. Mater., 30(4), 3-40.
  26. Li, J., Gravina, R.J., Smith, S.T. and Visintin, P. (2020), "Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability", Constr. Build. Mater., 261. https://doi.org/10.1016/j.conbuildmat.2020.119860.
  27. Machida, A. (1993), "State-of-the-art report on continuous fiber reinforcing materials", Concrete Eng. Ser., 3.
  28. Masmoudi, R., Nkurunziza, G., Benmokrane, B. and Cousin, P. (2003), "Durability of glass FRP composite bars for concrete structure reinforcement under tensile sustained load in wet and alkaline environments", Annu. Conf. Can. Soci. Civil Eng., 9, Moncton Nouveau-Brunswick, Canada.
  29. Micelli, F. and Nanni, A. (2001), "Issues related to durability of FRP reinforcement for RC structures exposed to accelerated ageing", Proc. ASC 16th Annu. Conf., Blacksburg, September.
  30. Nanni, A., De Luca, A. and Jawaheri Zadeh, H. (2019), Reinforced Concrete With FRP Bars: Mechanics and Design, CRC Press.
  31. Nkurunziza, G., Benmokrane, B., Debaiky, A.S. and Masmoudi, R. (2005), "Effect of sustained load and environment on long-term tensile properties of glass FRP reinforcing bars", ACI Struct. J., 102(4), 615-621.
  32. Porter, M.L., Mehus, J., Young, K.A., Barnes, B.A. and O'neil, E.F. (1997), "Aging degradation of fibre composite reinforcement for concrete structures", Adv. Compos. Mater. Bridge Struct., 2nd Int. Conference, August.
  33. Porter, M.L., Mehus, J., Young, K.A., O'neil, E.F. and Barnes, B.A. (1997), "Aging for fiber reinforcement in concrete", 3rd Int. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures, 2, 59-66.
  34. Ray, B.C. (2006), "Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites", J. Colloid Interf. Sci., 298(1), 111-117. https://doi.org/10.1016/j.jcis.2005.12.023.
  35. Rifai, M., El-Hassan, T. and El-Maaddawy, T. (2020), "Durability of basalt FRP reinforcing bars in alkaline solution and moist concrete environments", Constr. Build. Mater., 243, 118258. https://doi.org/10.1016/j.conbuildmat.2020.118258.
  36. Vijay, P.V. (1999), "Aging and design of concrete members reinforced with GFRP bars", Ph.D. Dissertation of Philosophy, West Virginia University. https://doi.org/10.33915/etd.3138.
  37. Yavuz, G. (2011), "The use of fiber reinforced polymers as the reinforcement of reinforced concrete beams", J. New World Sci. Acad., 6(4), 1A0212.
  38. Yan, F., Lin, Z. and Yang, M. (2016), "Bond mechanism and bond strength of GFRP bars to concrete: A review", Compos. Part B Eng., 98, 56-69. https://doi.org/10.1016/j.compositesb.2016.04.068.
  39. Yan, F., Yan, F., Lin, Z., Zhang, D., Gao, Z. and Li, M. (2017), "Experimental study on bond durability of glass fiber reinforced polymer bars in concrete exposed to harsh environmental agents: freeze-thaw cycles and alkaline-saline solution", Compos. Part B Eng., 116, 406-421. https://doi.org/10.1016/j.compositesb.2016.10.083.
  40. Zhang, S. and Wu, B. (2019), "Effects of salt solution on the mechanical behavior of concrete beams externally strengthened with AFRP", Constr. Build. Mater., 229, 117044. https://doi.org/10.1016/j.conbuildmat.2019.117044.