DOI QR코드

DOI QR Code

Fracture properties of ternary blended fiber reinforced self-compacting concrete-A plastic viscosity approach

  • Rama, J.S. Kalyana (Department of Civil Engineering, Ecole Centrale School of Engineering, Mahindra University) ;
  • Kubair, Sai (Department of Civil Engineering, Delft University of Technology) ;
  • Sivakumar, M.V.N. (Department of Civil Engineering, National Institute of Technology) ;
  • Vasan, A. (Department of Civil Engineering, BITS Pilani-Hyderabad Campus) ;
  • Murthy, A. Ramachandra (CSIR-Structural Engineering Research Centre)
  • Received : 2020.12.28
  • Accepted : 2021.09.25
  • Published : 2021.10.25

Abstract

With the demand in the usage of Self-Compacting Concrete (SCC) there is a need to look into an alternate procedure of mix design to address the present practical issues. The existing standards of SCC mix design either underestimates or overestimates the materials used for the production of concrete which reduces the workability, durability and increases the cost. In the present study a mix design procedure which is based on the plastic viscosity of paste and target compressive strength of the SCC mix is being developed using a micromechanical procedure. Cement Replacement Materials like Slag and Fly ash are used for the present study in binary and ternary mix compositions. To address the issue of scarcity of river sand in India, Crushed Rock Fine is used a fine aggregate for the proposed mix design. To enhance the mechanical characteristics of SCC mixes, influence of varying fiber fraction is also studied for the Ternary SCC mixes. The volume fraction of fibers and aspect ratio of fibers are entered as an input into the programming tool to obtain combinations of SCC mixtures. Hooked end steel fibers with volume ranging from 0.1% to 0.5% are chosen for the experimental investigation. Results indicated that the compressive, split tensile and flexural strengths increased with the increase in fiber volume fraction but the fresh properties slump flow, T500 and J-ring spread, V-funnel and L-box decreased. Further, the study is extended in evaluating the fracture energy of Ternary SCC mixes with and without fibers. Fracture energy increased with the increase in fiber volume and post-peak responses are captured more accurately with the presence of fibers. The evaluated fracture energy will be useful for the analysis of cracked concrete structural components.

Keywords

Acknowledgement

First, Second and Fourth authors would like to acknowledge the facilities provided by BITS Pilani-Hyderabad Campus for carrying out the research and funding received from DST-FIST. First Author would like to Acknowledge Mr. P. Srinivasu and Mr. P. Sai Saran from IJM Concrete Pvt Ltd. for their valuable suggestions on proportioning concrete mixes.

References

  1. Abo Dhaheer, M.S., Al-Rubaye, M.M., Alyhya, W.S., Karihaloo, B.L. and Kulasegaram, S. (2016), "Proportioning of self-compacting concrete mixes based on target plastic viscosity and compressive strength: Part I-mix design procedure", J. Sustain. Cement Mater., 5(4), 199-216. https://doi.org/10.1080/21650373.2015.1039625.
  2. Aggarwal, P. and Aggarwal, Y. (2011), "Prediction of compressive strength of self-compacting concrete with fuzzy logic", Int. J. Math. Comput. Sci., 5(5), 774-781. https://doi.org/10.5281/zenodo.1330501.
  3. Aggarwal, Y. and Aggarwal, P. (2011), "Prediction of compressive strength of SCC containing bottom ash using artificial neural networks", Int. J. Math. Comput. Sci., 5(5), 762-767. https://doi.org/10.5281/zenodo.1329661.
  4. Alqadi, A.N., Mustapha, K.N.B., Naganathan, S. and Al-Kadi, Q.N. (2013), "Development of self-compacting concrete using contrast constant factorial design", J. King Saud Univ. Eng. Sci., 25(2), 105-112. https://doi.org/10.1016/j.jksues.2012.06.002.
  5. Alyamac, K.E. and Ince, R. (2009), "A preliminary concrete mix design for SCC with marble powders", Constr. Build. Mater., 23(3), 1201-1210. https://doi.org/10.1016/j.conbuildmat.2008.08.012.
  6. Batchelor, G.K. (1977), "The effect of Brownian motion on the bulk stress in a suspension of spherical particles", J. Fluid Mech., 83(1), 97-117. https://doi.org/10.1017/S0022112077001062.
  7. Beycioglu, A. and Aruntas, H.Y. (2014), "Workability and mechanical properties of self-compacting concretes containing LLFA, GBFS and MC", Constr. Build. Mater., 73, 626-635. https://doi.org/10.1016/j.conbuildmat.2014.09.071.
  8. Boukendakdji, O., Kadri, E.H. and Kenai, S. (2012), "Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete", Cement Concrete Compos., 34(4), 583-590. https://doi.org/10.1016/j.cemconcomp.2011.08.013.
  9. Chong, J.S., Christiansen, E.B. and Baer, A.D. (1971), "Rheology of concentrated suspensions", J. Appl. Polym. Sci., 15(8), 2007-2021. https://doi.org/10.1002/app.1971.070150818.
  10. Deeb, R. (2013), "Flow of self-compacting concrete", Ph.D. Dissertation of Philosophy, Cardiff University.
  11. Dinakar, P. and Manu, S.N. (2014), "Concrete mix design for high strength self-compacting concrete using metakaolin", Mater. Des., 60, 661-668. https://doi.org/10.1016/j.matdes.2014.03.053.
  12. Dinakar, P., Sethy, K.P. and Sahoo, U.C. (2013), "Design of self-compacting concrete with ground granulated blast furnace slag", Mater. Des., 43, 161-169. https://doi.org/10.1016/j.matdes.2012.06.049.
  13. Domone, P.L. (2006), "Self-compacting concrete: An analysis of 11 years of case studies", Cement Concrete Compos., 28(2), 197-208. https://doi.org/10.1016/j.cemconcomp.2005.10.003.
  14. Douma, O.B., Boukhatem, B. and Ghrici, M. (2014), "Prediction compressive strength of self-compacting concrete containing fly ash using fuzzy logic inference system", Int. J. Civil Arch. Struct. Constr. Eng., 8(12), 1265-1269.
  15. Douma, O.B., Boukhatem, B., Ghrici, M. and Tagnit-Hamou, A. (2017), "Prediction of properties of self-compacting concrete containing fly ash using artificial neural network", Neur. Comput. Appl., 28(1), 707-718. https://doi.org/10.1007/s00521-016-2368-7.
  16. Dvorkin, L., Bezusyak, A., Lushnikova, N. and Ribakov, Y. (2012), "Using mathematical modeling for design of self-compacting high strength concrete with metakaolin admixture", Constr. Build. Mater., 37, 851-864. https://doi.org/10.1016/j.conbuildmat.2012.04.019.
  17. Frankel, N.A. and Acrivos, A. (1967), "On the viscosity of a concentrated suspension of solid spheres", Chem. Eng. Sci., 22(6), 847-853. https://doi.org/10.1016/0009-2509(67)80149-0.
  18. Gesoglu, M., Guneyisi, E. and O zbay, E. (2009), "Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume", Constr. Build. Mater., 23(5), 1847-1854. https://doi.org/10.1016/j.conbuildmat.2008.09.015.
  19. Ghanbari, A. (2011), "Self-compacting high and ultra-high-performance concretes", Ph.D. Dissertation of Philosophy, Cardiff University.
  20. Guneyisi, E., Gesoglu, M. and O zbay, E. (2010), "Strength and drying shrinkage properties of self-compacting concretes incorporating multi-system blended mineral admixtures", Constr. Build. Mater., 24(10), 1878-1887. https://doi.org/10.1016/j.conbuildmat.2010.04.015.
  21. Kalyana Rama, J.S., Chauhan, D.R., Sivakumar, M.V.N., Vasan, A. and Murthy, A.R. (2017), "Fracture properties of concrete using damaged plasticity model-A parametric study", Struct. Eng. Mech., 64(1), 59-69. http://doi.org/10.12989/sem.2017.64.1.059.
  22. Kalyana Rama, J.S., Sivakumar, M.V.N., Vasan, A., Kubair, S. and Ramachandra Murthy, A. (2017), "Plastic viscosity-based mix design of self-compacting concrete with crushed rock fines", Comput. Concrete, 20(4), 461-468. https://doi.org/10.12989/cac.2017.20.4.461.
  23. Kanadasan, J. and Razak, H.A. (2014), "Mix design for self-compacting palm oil clinker concrete based on particle packing", Mater. Des., 56, 9-19. https://doi.org/10.1016/j.matdes.2013.10.086.
  24. Karihaloo, B.L., Murthy, A.R. and Iyer, N.R. (2013), "Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model", Cement Concrete Res., 49, 82-88. https://doi.org/10.1016/j.cemconres.2013.03.010.
  25. Khaleel, O.R. and Razak, H.A. (2014), "Mix design method for self-compacting metakaolin concrete with different properties of coarse aggregate", Mater. Des., 53, 691-700. https://doi.org/10.1016/j.matdes.2013.07.072.
  26. Krieger, I.M. and Dougherty, T.J. (1959), "A mechanism for non- Newtonian flow in suspensions of rigid spheres", Transac. Soc. Rheol., 3(1), 137-152. https://doi.org/10.1122/1.548848.
  27. Kumar, P. and Mittal, K.L. (1999), Handbook of Microemulsion Science and Technology, CRC press.
  28. Le, H.T., Muller, M., Siewert, K. and Ludwig, H.M. (2015), "The mix design for self-compacting high-performance concrete containing various mineral admixtures", Mater. Des., 72, 51-62. https://doi.org/10.1016/j.matdes.2015.01.006.
  29. Li, F.X., Yu, Q.J., Wei, J.X. and Li, J.X. (2011), "Predicting the workability of self-compacting concrete using artificial neural network", Adv. Mater. Res., 168, 1730-1734. https://doi.org/10.4028/www.scientific.net/AMR.168-170.1730.
  30. Long, G., Gao, Y. and Xie, Y. (2015), "Designing more sustainable and greener self-compacting concrete", Constr. Build. Mater., 84, 301-306. https://doi.org/10.1016/j.conbuildmat.2015.02.072.
  31. Mathew, G. and Paul, M.M. (2012), "Mix design methodology for laterized self-compacting concrete and its behaviour at elevated temperature", Constr. Build. Mater., 36, 104-109. https://doi.org/10.1016/j.conbuildmat.2012.04.057.
  32. Murthy, A.R., Karihaloo, B.L., Iyer, N.R. and Prasad, B.R. (2013), "Determination of size-independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25. https://doi.org/10.1016/j.cemconres.2013.03.015.
  33. Murthy, A.R., Karihaloo, B.L., Iyer, N.R. and Prasad, B.R. (2013), "Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy", Constr. Build. Mater., 47, 1160-1166. https://doi.org/10.1016/j.conbuildmat.2013.06.004.
  34. Nepomuceno, M.C., Pereira-de-Oliveira, L.A. and Lopes, S.M.R. (2014), "Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders", Constr. Build. Mater., 64, 82-94. https://doi.org/10.1016/j.conbuildmat.2014.04.021.
  35. Opara, H.E., Eziefula, U.G. and Eziefula, B.I. (2018), "Comparison of physical and mechanical properties of river sand concrete with quarry dust concrete", Civil Eng., 13, 127-134.
  36. Pathak, S.S., Sharma, S., Sood, H. and Khitoliya, R.K. (2012), "Prediction of compressive strength of self compacting concrete with flyash and rice husk ash using adaptive neuro-fuzzy inference system", Adv. Eng. Softw., 42(10), 780-786. https://doi.org/10.1016/j.advengsoft.2011.05.016.
  37. Phan-Thien, N. and Karihaloo, B.L. (1994), "Materials with negative Poisson's ratio: A qualitative microstructural model", J. Appl. Mech., 61(4), 1001-1004. https://doi.org/10.1115/1.2901547.
  38. Rama, J.S., Sivakumar, M.V.N., Kubair, K.S. and Vasan, A. (2019), "Influence of plastic viscosity of mix on self-compacting concrete with river and crushed sand", Comput. Concrete, 23(1), 37-47. https://doi.org/10.12989/cac.2019.23.1.037.
  39. Rama, J.S.K., Sivakumar, M.V.N., Vasan, A., Garg, C. and Walia, S. (2015), "A review on studies of fracture parameters of self-compacting concrete", Adv. Struct. Eng., 1705-1716. https://doi.org/10.1007/978-81-322-2187-6_129.
  40. Saito, N. (1950), "Concentration dependence of the viscosity of high polymer solutions", J. Phys. Soc. Japan, 5(1), 4-8. https://doi.org/10.1143/JPSJ.5.4.
  41. Shenoy, A.V. (2013), Rheology of Filled Polymer Systems, Springer Science and Business Media.
  42. Shi, C., Wu, Z., Lv, K. and Wu, L. (2015), "A review on mixture design methods for self-compacting concrete", Constr. Build. Mater., 84, 387-398. https://doi.org/10.1016/j.conbuildmat.2015.03.079.
  43. Siddique, R., Aggarwal, P. and Aggarwal, Y. (2011), "Prediction of compressive strength of self-compacting concrete containing bottom ash using artificial neural networks", Adv. Eng. Softw., 42(10), 780-786. https://doi.org/10.1016/j.advengsoft.2011.05.016.
  44. Struble, L. and Sun, G.K. (1995), "Viscosity of Portland cement paste as a function of concentration", Adv. Cement Base. Mater., 2(2), 62-69. https://doi.org/10.1016/1065-7355(95)90026-8.
  45. Su, N., Hsu, K.C. and Chai, H.W. (2001), "A simple mix design method for self-compacting concrete", Cement Concrete Res., 31(12), 1799-1807. https://doi.org/10.1016/S0008-8846(01)00566-X.
  46. Utracki, L.A. and Wilkie, C.A. (2002), Polymer Blends Handbook, 1, Kluwer Academic Publishers, Dordrecht.
  47. Uysal, M. and Sumer, M. (2011), "Performance of self-compacting concrete containing different mineral admixtures", Constr. Build. Mater., 25(11), 4112-4120. https://doi.org/10.1016/j.conbuildmat.2011.04.032.
  48. Uysal, M. and Tanyildizi, H. (2012), "Estimation of compressive strength of self-compacting concrete containing polypropylene fiber and mineral additives exposed to high temperature using artificial neural network", Constr. Build. Mater., 27(1), 404-414. https://doi.org/10.1016/j.conbuildmat.2011.07.028.
  49. Uysal, M., Yilmaz, K. and Ipek, M. (2012), "Properties and behavior of self-compacting concrete produced with GBFS and FA additives subjected to high temperatures", Constr. Build. Mater., 28(1), 321-326. https://doi.org/10.1016/j.conbuildmat.2011.08.076.
  50. Uysal, M., Yilmaz, K. and Ipek, M. (2012), "The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete", Constr. Build. Mater., 27(1), 263-270. https://doi.org/10.1016/j.conbuildmat.2011.07.049.
  51. Vand, V. (1948), "Viscosity of solutions and suspensions. II. Experimental determination of the viscosity-concentration function of spherical suspensions", J. Phys. Chem., 52(2), 300-314. https://doi.org/10.1021/j150458a002.
  52. Wallevik, O.H. and Wallevik, J.E. (2011), "Rheology as a tool in concrete science: The use of rheographs and workability boxes", Cement Concrete Res., 41(12), 1279-1288. https://doi.org/10.1016/j.cemconres.2011.01.009.