DOI QR코드

DOI QR Code

Investigating of the effect of composite and welded connections on the cyclic behavior of steel bridges

  • Received : 2020.04.05
  • Accepted : 2021.09.16
  • Published : 2021.10.25

Abstract

Connections play a significant role on the seismic performance of structures subjected to gravity and lateral loads. One of the most important strategies for plastic hinge transfer is the strengthening of connections. Composite and welded connections are commonly used in steel bridges. Each of these connections can affect the structural response to lateral loads such as cyclic loads. In this study, four steel bridge models with different types of connections, including composite and welded connections, are created in the finite element (FE) platform ABAQUS. After validation of a FE model using available experimental data, cyclic loading has been employed according to the load history proposed by Scientific Advisory Committee (SAC). The results indicate that using composite connections can increase shear capacity and improve ductility of the system. Also using composite connection can transfer stress concentrated from connection to other areas.

Keywords

Acknowledgement

This work was supported by Babol Noshirvani University of Technology under Grant BNUT/370680/97. This financial support is gratefully acknowledged.

References

  1. Abaqus, (2012), Abaqus/Standard, Version 6.11, ABAQUS, Inc., Pawtucket, R.I.
  2. Afshin, H., Abedi, K. and Norishirazi, M. (2012), "Numerical study on seismic retrofit of RC bridge columns by use of locally stiftened steel jackets", J. Civil Retrof., 2, 75-82. (in Persian)
  3. Baloevic, G., Radnic, J., Grgic, N., Matesan, D. and Smilovic, M. (2016), "Numerical model for nonlinear analysis of composite concrete-steel-masonry bridges", Coupl. Syst. Mech., 5(1), 1-20. http://doi.org/10.12989/csm.2016.5.1.001.
  4. Bruneau, M., Sarraf, M., Zahrai, S. and Alfawakhiri, F. (2002), "Displacement-based energy dissipation systems for steel bridges diaphragms", J. Constr. Steel Res., 58, 801-817. https://doi.org/10.1016/S0143-974X(01)00084-0.
  5. Celik, O.C. and Bruneau, M. (2009), "Seismic behavior of bidirectional-resistant ductile end diaphragms with buckling restrained braces in straight steel bridges", Eng. Struct., 31, 380-393. https://doi.org/10.1016/j.engstruct.2008.08.013.
  6. Correia, J.A.F.O., De Jesus, A.M., Silva, A.L., Pedrosa, B., Rebelo, C. and Calcada, R. (2017), "FE simulation of SN curves for a riveted connection using two-stage fatigue models", Adv. Comput. Des., 2, 333-348. https://doi.org/10.12989/acd.2017.2.4.333.
  7. Fahmy, M.F., Wu, Z. and Wu, G. (2010), "Post-earthquake recoverability of existing RC bridge piers retrofitted with FRP composites", Constr. Build. Mater., 24, 980-998. https://doi.org/10.1016/j.conbuildmat.2009.11.020.
  8. Fulmer, S., Kowalsky, M. and Nau, J. (2015), "Grouted shear stud connection for steel bridge substructures", J. Constr. Steel Res., 109, 72-86. https://doi.org/10.1016/j.jcsr.2015.02.009.
  9. Gheitasi, A. and Harris, D.K. (2014), "Failure characteristics and ultimate load-carrying capacity of redundant composite steel girder bridges: Case study", J. Bridge Eng., 20, 05014012 . https://doi.org/10.1061/(ASCE)BE.1943-5592.0000667.
  10. Hung, H.H., Sung, Y.C., Lin, K.C., Jiang, C.R. and Chang, K.C. (2017), "Experimental study and numerical simulation of precast segmental bridge columns with semi-rigid connections", Eng. Struct., 136, 12-25. https://doi.org/10.1016/j.engstruct.2017.01.012.
  11. Kang, H., Zhao, Y., Zhu, H. and Jin, Y. (2013), "Static behavior of a new type of cable-arch bridge", J. Constr. Steel Res., 81, 1-10. https://doi.org/10.1016/j.jcsr.2012.10.010.
  12. Lotfollahi Yaghin, M., Ashnaeiyan, A. and Sazgari, A. (2013), "Study on the strengthening of I-Shape beam in concrete bridges by using steel plates", The Second National Conference on New Advances in Civil Engineering, University of Isfahan. (in Persian)
  13. Mehrsoroush, A. and Saiidi, M.S. (2016), "Cyclic response of precast bridge piers with novel column-base pipe pins and pocket cap beam connections", J. Bridge Eng., 21(4), 04015080. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000833.
  14. Mirzagoltabar roshan, A., Naseri, A. and Mahmoodi Pati, Y. (2018), "Probabilistic evaluation of seismic vulnerability of multi-span bridges in northern of Iran", J. Struct. Constr. Eng., 5(1), 36-54. https://doi.org/10.22065/jsce.2017.68948.1009.
  15. Nakamura, S.I., Momiyama, Y., Hosaka, T. and Homma, K. (2002), "New technologies of steel/concrete composite bridges", J. Constr. Steel Res., 58, 99-130. https://doi.org/10.1016/S0143-974X(01)00030-X.
  16. Naseri, A., Mirzagoltabar roshan, A., Pahlavan, H. and Ghodrati Amiri, G. (2020a), "Effects of curvature radius on vulnerability of curved bridges subjected to near and far-field strong ground motions", Struct. Monit. Mainten., 7(4), 367-392. https://doi.org/10.12989/smm.2020.7.4.367.
  17. Naseri, A., Mirzagoltabar Roshan, A., Pahlavan, H. and Ghodrati Amiri, G. (2020b), "Probabilistic seismic assessment of RC box-girder bridges retrofitted with FRP and steel jacketing", Coupl. Syst. Mech., 9(4), 359-379. https://doi.org/10.12989/csm.2020.9.4.359.
  18. Pahlavan, H., Naseri, A. and Einolahi, A. (2019), "Probabilistic seismic vulnerability assessment of RC frame structures retrofitted with steel jacketing", Amirkabir J. Civil Eng., 51(3), 585-598. https://doi.org/10.22060/ceej.2018.13692.5459.
  19. Pahlavan, H., Zakeri, B. and Ghodrati Amiri, G. (2017), "Probabilistic performance assessment of retrofitted horizontally curved multi-frame RC box-girder bridges", J. Earthq. Tsunami, 11(04), 1750010. https://doi.org/10.1142/S1793431117500105.
  20. Palermo, A., Pampanin, S. and Marriott, D. (2007), "Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections", J. Struct. Eng., 133(11), 1648-1661. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1648).
  21. Paolacci, F., Giannini, R., Alessandri, S. and Corritore, D. (2018), "On the cyclic behavior of new pier-to-deck connections for short-medium span composite I-girder bridges", J. Traff. Transp. Eng. (Engl. Ed.), 5(6), 439-453. https://doi.org/10.1016/j.jtte.2018.10.002.
  22. Rahnavard, R., Hassanipour, A. and Mounesi, A. (2016), "Numerical study on important parameters of composite steel-concrete shear walls", J. Constr. Steel Res., 121, 441-456 . https://doi.org/10.1016/j.jcsr.2016.03.017.
  23. Rahnavard, R., Hassanipour, A., Suleiman, M. and Mokhtari, A. (2017), "Evaluation on eccentrically braced frame with single and double shear panels", J. Build. Eng., 10, 13-25 . https://doi.org/10.1016/j.jobe.2017.01.006.
  24. Shaker, F. and Rahai, A. (2019), "Substructure responses of a concrete bridge with different deck-to-pier connections", Int. J. Civil Eng., 17(11), 1683-1695. https://doi.org/10.1007/s40999-019-00455-w.
  25. Sharifi, M. (2005), "Evaluation of SAC committee's research with regard to welded joint", Master Thesis, Iran University of Science and Technology. (in Persian)
  26. Stephens, M.T., Lehman, D.E. and Roeder, C.W. (2015), "Concrete-filled tube bridge pier connections for accelerated bridge construction", No. CA15-2417.
  27. Venture, S.J. (1999), "Seismic design criteria for new moment resisting steel frame construction (50% Draft)", Report No. FEMAXXX, January .
  28. Yang, Y., Sneed, L.H., Morgan, A., Saiidi, M.S. and Belarbi, A. (2015), "Repair of RC bridge columns with interlocking spirals and fractured longitudinal bars-An experimental study", Constr. Build. Mater., 78, 405-420. https://doi.org/10.1016/j.conbuildmat.2015.01.010.