DOI QR코드

DOI QR Code

Improving aeroelastic characteristics of helicopter rotor blades in hovering

  • Badran, Hossam T. (Arab Organization for Industrialization) ;
  • Tawfik, Mohammad (Academy of Knowledge) ;
  • Negm, Hani M. (Aerospace Engineering Department, Cairo University)
  • Received : 2021.02.08
  • Accepted : 2021.05.17
  • Published : 2021.05.25

Abstract

Flutter is a dangerous phenomenon encountered in flexible structures subjected to aerodynamic forces. This includes aircraft, helicopter blades, engine rotors, buildings and bridges. Flutter occurs as a result of interactions between aerodynamic, stiffness, and inertia forces on a structure. The conventional method for designing a rotor blade to be free from flutter instability throughout the helicopter's flight regime is to design the blade so that the aerodynamic center (AC), elastic axis (EA) and center of gravity (CG) are coincident and located at the quarter-chord. While this assures freedom from flutter, it adds constraints on rotor blade design which are not usually followed in fixed wing design. Periodic Structures have been in the focus of research for their useful characteristics and ability to attenuate vibration in frequency bands called "stop-bands". A periodic structure consists of cells which differ in material or geometry. As vibration waves travel along the structure and face the cell boundaries, some waves pass and some are reflected back, which may cause destructive interference with the succeeding waves. In this work, we analyze the flutter characteristics of helicopter blades with a periodic change in their sandwich material using a finite element structural model. Results shows great improvements in the flutter rotation speed of the rotating blade obtained by using periodic design and increasing the number of periodic cells.

Keywords

References

  1. Babu Gunda, J. and Ganguli, R. (2008), "New rational interpolation functions for finite element analysis of rotating beams", Int. J. Mech. Sci., 50(3), 578-588. https://doi.org/10.1016/j.ijmecsci.2007.07.014.
  2. Badran, H.T. (2008), "Vibration attenuation of periodic sandwich beams", M.Sc. Dissertation, Cairo University, Cairo, Egypt.
  3. Badran, H.T. (2018), "Improving dynamic and aeroelastic performance of helicopter rotors using periodic design and piezo active control", Ph.D. Dissertation, Cairo University, Cairo.
  4. Badran, H.T., Tawfik, M. and Negm, H.M. (2017), "Improving wing aeroelastic characteristics using periodic design", Adv. Aircraft Spacecraft Sci., 4(4), 353-369. https://doi.org/10.12989/aas.2017.4.4.353.
  5. Badran, H.T., Tawfik, M. and Negm, H.M. (2019), "Improving aeroelastic characteristics of helicopter rotor blades in forward flight", Adv. Aircraft Spacecraft Sci., 6(1), 31-49. http://doi.org/10.12989/aas.2019.6.1.031.
  6. Banerjee, J. and Kennedy, D. (2014), "Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects", J. Sound Vib., 333(26), 7299-7312. https://doi.org/10.1016/j.jsv.2014.08.019.
  7. Bisplinghoff, R., Ashley, H. and Halfman, R. (1996), Aeroelasticity, Dover Publication Inc., Mineola, New York, U.S.A.
  8. Dayhoum, A., Zakaria, M.Y. and E. Abdelhamid, O. (2020), "Elastic torsion effects on helicopter rotor loading in forward flight", Proceedings of the AIAA Scitech 2020 Forum, Florida, Orlando, U.S.A., January.
  9. Filippi, M. and Carrera, E. (2015), "Flutter analysis of fixed and rotary wings through a one-dimensional unified formulation", Compos. Struct., 133, 381-389. https://doi.org/10.1016/j.compstruct.2015.07.103.
  10. Guertin, M. (2012), "The application of finite element Methods to Aeroelastic Lifting Surface Flutter", M.S. Dissertation, Rice University,Houston, Texas, U.S.A.
  11. Hammond, C.E. (1969), "Compressibility effects in helicopter rotor blade flutter", Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, U.S.A.
  12. Hollowell, S.J. and Dugundji, J. (1984), "Aeroelastic flutter and divergence of stiffness coupled, graphite/epoxy cantilevered plates", J. Aircraft, 21(1), 69-76. https://doi.org/10.2514/3.48224.
  13. Jones, W.P. and Rao, B.M. (1970), "Compressibility effects on oscillating rotor blades in hovering flight" AIAA Journal 8(2): 321-329 DOI: https://doi.org/10.2514/3.5663.
  14. Kee, Y.J. and Shin, S.J. (2015), "Structural dynamic modeling for rotating blades using three dimensional finite elements", J. Mech. Sci. Technol., 29(4), 1607-1618. https://doi.org/10.1007/s12206-015-0332-6.
  15. Lim, I.G. and Lee, I. (2009), "Aeroelastic analysis of bearingless rotors with a composite flexbeam", Compos. Struct., 88(4), 570-578. https://doi.org/10.1016/j.compstruct.2008.06.007.
  16. Loewy, R.G. (1957), "A two-dimensional approximation to the unsteady aerodynamics of rotary wings", J. Aeronaut. Sci., 24(2), 81-92. https://doi.org/10.2514/8.3777.
  17. Mead, D. (1996), "Wave propagation in continuous periodic structures: research contributions from Southampton, 1964-1995", J. Sound Vib., 190(3), 495-524. https://doi.org/10.1006/jsvi.1996.0076.
  18. Mead, D. and Parthan, S. (1979), "Free wave propagation in two-dimensional periodic plates", J. Sound Vib., 64(3), 325-348. https://doi.org/10.1016/0022-460X(79)90581-9.
  19. Nitzsche, F., D'Assuncao, D. and De Marqui Junior, C. (2015), "Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators", J. Intell. Mater. Syst. Struct., 26(13), 1656-1668. https://doi.org/10.1177/1045389X15572011.
  20. Reddy, J.N. (2002), Energy Principles and Variational Methods in Applied Mechanics, John Wiley and Sons, New York, U.S.A.
  21. Tanaka, M. and Bercin, A. (1997), "Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section", Appl. Math. Modell., 21(6), 339-344. https://doi.org/10.1016/S0307-904X(97)00030-9.
  22. Theodorsen, T. (1935), "General theory of aerodynamic instability and the mechanism of flutter",NACA-TR-496;Advisory Committee for Aeronautics, Langley, Virginia, U.S.A.
  23. Yardimoglu, B. (2010), "A novel finite element model for vibration analysis of rotating tapered Timoshenko beam of equal strength", Fin. Elem. Anal. Des., 46(10), 838-842. https://doi.org/10.1016/j.finel.2010.05.003.
  24. Zhou, C., Laine, J., Ichchou, M. and Zine, A. (2015), "Wave finite element method based on reduced model for one-dimensional periodic structures", Int. J. Appl. Mech., 7(2), 1550018. https://doi.org/10.1142/S1758825115500180.