DOI QR코드

DOI QR Code

Optimum design of multi-anchored larssen type sheet pile wall for temporary construction works

  • Yazici, Mehmet F. (Department of Civil Engineering, Suleyman Demirel University Graduate School of Natural and Applied Sciences) ;
  • Keskin, Siddika N. (Department of Civil Engineering, Suleyman Demirel University Graduate School of Natural and Applied Sciences)
  • 투고 : 2020.02.08
  • 심사 : 2021.09.28
  • 발행 : 2021.10.10

초록

In some construction works such as multi-basement buildings, subways, deep excavation problems are encountered. In such cases, the shoring walls are used to to prevent damage to the structures next to the excavation area and to provide a safe working environment in the excavation area. In cases where a temporary excavation support is required, sheet pile walls can be more economical comparing to the other walls in the long run due to their reusability. In the present study the analyses were carried out by changing various parametric components such as the number of anchors in vertical row, horizontal and vertical spacing amongst the anchors, anchor angle and excavation depth in LARSSEN type sheet piles constructed temporarily in medium-dense sand. In the analyses, the trapezoidal horizontal earth pressure envelope recommended by FHWA (1999) since the stress concentration occured at the anchor locations. Besides the limit values recommended by FHWA (1999) and BS (1989) was used in the analyses. In total 35488 different sheet pile wall geometry configurations were investigated. According to research results, the lowest costs occur when the horizontal spacing amongst the anchors is 3 m and the angle of the anchors with the horizontal is 150. The lowest costs were obtained when the vertical distance of the uppermost anchor to the ground surface is 3 m. Sheet pile sections with optimum cost were modeled in Plaxis 2D to run displacement analyses. Findings showed that the wall displacements were within the allowable limits commonly used in the literature.

키워드

참고문헌

  1. Aaron, T.H. (2006), "Material properties of the grade 300 and grade 270 prestressing strands and their impact on the design of bridges", M.Sc. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, U.S.A.
  2. Adinolfi, M., Alessandro, F.R.L., Laloui, L. and Aversa, S. (2021), "Experimental and numerical investigation of the thermo-mechanical behaviour of an energy sheet pile wall", Geomech. Energy Environ., 25, 100208. https://doi.org/10.1016/j.gete.2020.100208.
  3. Aktan, E. (2014), "Numerical analysis of prestressed anchored pile wall: shoring system in front of historic building in hilton istanbul bomonti hotel and conference center project", M.Sc. Dissertation, Istanbul Technical University, Istanbul, Turkey.
  4. Alam, J. and Siddiquee, S.A. (2014), "A parametric study of anchored earth wall by finite element method", KSCE J. Civ. Eng., 18(7), 2034-2042. https://doi.org/10.1007/s12205-014-0171-5.
  5. Amer, H.A.R. (2013), "Effect of wall penetration depth on the behaviour of sheet pile walls", M.Sc. Dissertation, University of Dayton, Dayton, Ohio, U.S.A.
  6. Athira, H.S., Athira, V.S., Farhana, F., Gayathri, G.S., Babu, S.R., Asha, N.P. and Radhika, P.N. (2018), "Deformation behaviour of sheet pile walls", Proceedings of the 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology (ICETEST), Govt Coll, Thrissur, India, January.
  7. Babu, G.S. and Basha, B.M. (2008), "Optimum design of cantilever sheet pile walls in sandy soils using inverse reliability approach", Comput. Geotech., 35(2), 134-143. https://doi.org/10.1016/j.compgeo.2007.04.001.
  8. Bhanuchitra, M. and Prusty, S.B. (2010), "Optimal design of the shoring system: a parametric study", Proceedings of the Indian Geotechnical Conference, Mumbai, India, December.
  9. Bilgin, O. (1994), "The behaviour of anchored sheet pile walls constructed by excavation and backfilling", M.Sc. Thesis, Middle East Technical University, Ankara, Turkey.
  10. Bilgin, O. (2012), "Lateral earth pressure coefficients for anchored sheet pile walls", Int. J. Geomech., 12(5), 584-595. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000154.
  11. BS 8081, (1989) British standard code of practice for ground anchorages. BSI, London, U.K.
  12. Cakir, T. (2014), "Backfill and subsoil interaction effects on seismic behaviour of a canitlever wall", Geomech. Eng., 6(2), 117-138. https://doi.org/10.12989/gae.2014.6.2.117.
  13. Clough, G.W. and O'Rourke, T.D. (1990), "Construction induced movements of insitu walls", Geotech. Sp. Publ., 439-470.
  14. Das, M.R. and Das, S.K. (2015), "Optimal design of sheet pile wall embedded in clay", Institut. Eng., 96(3), 249-258. https://doi.org/10.1007/s40030-015-0128-9.
  15. Das, B.M. (2016), Principle of Foundation Engineering, Global Engineering, Boston, Massachusetts, U.S.A.
  16. Day, R.A. (1990), "Finite element analysis of sheet pile retaining walls", Ph.D. Dissertation, University of London, London, U.K.
  17. Duncan, J.M. and Chang, C.Y. (1970), "Nonlinear analysis of stress and strain in soils", J. Soil Mech. Found. Div., 96, 1629-1653. https://doi.org/10.1061/JSFEAQ.0001458
  18. Emarah, D.A. and Seleem, S.A. (2018), "A numerical study of anchored sheet piles subjected to different types of sandy soils backfill", HBRC J., 14(3), 422-430. https://doi.org/10.1016/j.hbrcj.2018.03.001.
  19. Fenerci, E., (2010), "Effect of soil profile and design method and deep excavation support systems with sheet piles", M.Sc. Dissertation, Sakarya University, Sakarya, Turkey.
  20. FHWA-IF-99-015 (1999), Ground anchors and anchored systems, Federal Highway Administration, Washington, U.S.A.
  21. Gazetas, G., Garini, E. and Zafeirakos, A. (2016), "Seismic analysis of tall anchored sheet-pile walls", Soil Dyn. Earthq. Eng., 91, 209-221. https://doi.org/10.1016/j.soildyn.2016.09.031.
  22. Ghazaly, Z.M., Rahim, M.A., Hiung, V.K., Isa, N.F. and Sofri, L.A. (2016), "The Effect of construction stage on the development of retaining wall", Proceedings of the International Conference on Advanced Materials Engineering and Technology V, Kaohsiung City, China, December.
  23. Gouw, T.L. (2014), "Common mistakes on the application of plaxis 2d in analyzing excavation problems", Int. J. Appl. Eng. Res., 9, 8291-8311.
  24. Hsiung, B.C.B. and Dao, S.D. (2014), "Evaluation of constitutive soil models for predicting movements caused by a deep excavation in sands", Elec. J. Geotech. Eng., 19, 17325-17344.
  25. Jesmani, M., Mehdipour, I. and Ajami, A. (2011), "Comparison between 2d and 3d behaviour of sheet piles by finite element method", Kuwait J. Sci. Eng., 38(2B), 1-16.
  26. Jiang, S., Du, C. and Sun, L. (2018), "Numerical analysis of sheet pile wall structure considering soil-structure interaction", Geomech. Eng., 16(3), 309-320. https://doi.org/10.12989/gae.2018.16.3.309.
  27. Kayhan, A.H. and Demir, A. (2018), "Optimum design of rc cantilever retaining walls subjected to static and dynamic loadings by differential evolution algorithm", Pamukkale Univ. J. Eng. Sci., 24(3), 403-412. https://doi.org/10.5505/pajes.2017.04834.
  28. Khajehzadeh, M., Taha, M.R. and Eslami, M. (2013), "Efficient gravitational search algorithm for optimum design of retaining walls", Struct. Eng. Mech., 45(1), 111-127. https://doi.org/10.12989/sem.2013.45.1.111.
  29. Khoiri, M. and Ou, C.Y. (2013), "Evaluation of deformation parameter for deep excavation in sand through case studies", Comput. Geotech., 47, 57-67. https://doi.org/10.1016/j.compgeo.2012.06.009.
  30. Liong, G.T. (2014), "Common mistakes on the application of plaxis 2d in analyzing excavation problems", Int. J. Appl. Eng. Res., 9(21), 8291-8311.
  31. Mahdi, I.M. and Ebid, A.M. (2015), "Optimum penetration depth of cantilever sheet pile walls in dry granular soil based on reliability analysis concept and its impact on the shoring system cost", Int. J. Appl. Innov. Eng. Manage., 4(5), 11-21.
  32. Ou, C.Y., Hsieh, P.G. and Chiou, D.C. (1993), "Characteristics of ground surface settlement during excavation", Can. Geotech. J., 30, 758-767. https://doi.org/10.1139/t93-068.
  33. Ou, H., Li, R., Zhang, J., Hu, H. and Zhang, D. (2016), "A novel approach for seismic design of anchored sheet pile wall", Tehnicki vjesnik, 23(2), 455-463. https://doi.org/10.17559/TV-20151106090533.
  34. Ou, H.L., Luo, H., Hu, H.G., Jia, H.Y. and Zhang, D.Y. (2018). "Dynamic response of anchored sheet pile wall under ground motion: Analytical model with experimental validation", Soil Dyn. Earthq. Eng., 115, 896-906. http://doi.org/10.1016/j.soildyn.2017.09.015.
  35. Ouria, A., Toufigh, V., Desai, C., Toufigh, V. and Saadatmanesh, H. (2016), "Finite element analysis of a cfrp reinforced retaining wall", Geomech. Eng., 10(6), 757-774. https://doi.org/10.12989/gae.2016.10.6.757.
  36. Plaxis 3D (2007), Foundation Tutorial Manual Version 2.
  37. Tang, L., Cong, S., Xing, W., Ling, X., Geng, L., Nie, Z. and Gan, F. (2018), "Finite element analysis of lateral earth pressure on sheet pile walls", Eng. Geol., 244, 146-158. https://doi.org/10.1016/j.enggeo.2018.07.030.
  38. TBSC (2018), Excavation safety and precautions circular, Turkish Building Seismic Code, Turkey.
  39. TBSC (2018), Turkish building seismic code, disaster and emergency management presidency, Republic of Turkey Prime Ministry, Ankara, Turkey.
  40. Wang, J., Xiang, H. and Yan, J. (2019), "Numerical simulation of steel sheet pile support structures in foundation pit excavation", Int. J. Geomech., 19(4), 1-12. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001373.
  41. Xie, J.R., Li, B.T., Chen, P.H. and Zhuang, Y.Q. (2014), "Optimized design of Larsen steel sheet pile supporting structure based on parameter sensitivity", Appl. Mech. Mater., 501-504, 770-776. https://doi.org/10.4028/www.scientific.net/amm.501-504.770.
  42. Yazici, M.F. and Keskin, S.N. (2019), "Optimum design of two anchored steel sheet pile system", J. Graduate School Nat. Appl. Sci. Mehmet Akif Ersoy Univ., 10(1), 34-50. https://doi.org/10.29048/makufebed.536561.
  43. Yazici, M.F. (2019), "Optimum design of retaining structures", M.Sc. Dissertation, Suleyman Demirel University, Isparta, Turkey.