대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제23권2호
  • /
  • Pages.31-36
  • /
  • 2021
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지
DOI QR코드

DOI QR Code

문헌조사에 기반한 OWAS, RULA 및 REBA의 연구 현황 및 비교

Review and Comparison of OWAS, RULA and REBA Based on Literature Survey

  • 기도형 (계명대학교 산업공학과)
  • Kee, Dohyung (Department of Industrial Engineering, Keimyung University)
  • 투고 : 2021.02.09
  • 심사 : 2021.03.22
  • 발행 : 2021.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to review observational methods for assessing postural loads such as OWAS, RULA and REBA, and to compare them, based on the literature survey. The literature was searched through academic database of ScienceDirect using the key words of observational methods, OWAS, RULA and REBA. The results exhibited that of the thee methods, RULA was cited in the literature and applied to manufacturing industries the most frequently. Although it has been known that RULA is appropriate for assessing upper body postures, it has been applied to healthcare and social work activities, agriculture, forestry, fishing, construction, mining and quarrying, which require unstable lower limb postures. The countries where more number of relevant studies have been carried out were USA, India, Brazil, UK, etc. It was recommended that of the three techniques, RULA may be better for assessing postural loads, because it evaluated postural loads more highly, irrespective of industry, work type and lower limb postures, and its assessment results had higher agreement rate with experts' assessments than those of OWAS and REBA. It is expected that the results of this study will be used as a guideline for selecting an appropriate observational method.

키워드

참고문헌

  1. A. Burdorf(2010), "The role of assessment of biomechanical exposure at the workplace in the prevention of musculoskeletal disorders." Scandinavian Journal of Work, Environment&Health, 36(1):1-2. https://doi.org/10.5271/sjweh.2882
  2. A. H. Schwartz, T. J. Albin, S. G. Gerberich(2019), "Intra-rater and inter-rater reliability of the rapid entire body assessment (REBA) tool." International Journal of Industrial Ergonomics, 71:111-116. https://doi.org/10.1016/j.ergon.2019.02.010
  3. A. Hussain, K. Case, R. Marshall, S. Summerskill (2016), "Using ergonomic risk assessment methods for designing inclusive work practices: A case study." Human Factors and Ergonomics in Manufacturing & Service Industries, 26(3):337-355. https://doi.org/10.1002/hfm.20650
  4. B. Silverstein, R. Clark(2004), "Interventions to reduce work-related musculoskeletal disorders." Journal of Electromyography and Kinesiology, 14(1):135-152. https://doi.org/10.1016/j.jelekin.2003.09.023
  5. C. M. Lind, M. Forsman, L. M. Rose(2019), "Development and evaluation of RAMP I-a practitioner's tool for screening of musculoskeletal disorder risk factors in manual handling." International Journal of Occupational Safety Ergonomics, 25(5): 165-180. https://doi.org/10.1080/10803548.2017.1364458
  6. C. M. Lind, M. Forsman, L. M. Rose(2020), "Development and evaluation of RAMP II-a practitioner's tool for assessing musculoskeletal disorder risk factors in industrial manual handling." Ergonomics, 63(4):477-504. https://doi.org/10.1080/00140139.2019.1710576
  7. D. Kee, W. Karwowski(2001), "LUBA: An assessment technique for postural loading on the upper body based on joint motion discomfort and maximum holding time." Applied Ergonomics, 32:357-366. https://doi.org/10.1016/S0003-6870(01)00006-0
  8. D. Kee, W. Karwowski(2007), "A comparison of three observational techniques for assessing postural loads in industry." International Journal of Occupational Safety and Ergonomics, 13(1):3-14. https://doi.org/10.1080/10803548.2007.11076704
  9. G. C. David(2005), "Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders." Occupational Medicine, 55:190-199. https://doi.org/10.1093/occmed/kqi082
  10. H. Noh, H. Roh(2013), "Approach of industrial physical therapy to assessment of the musculoskeletal system and ergonomic risk factors of the dental hygienist." The Journal of Physical Therapy Science, 25:821-826. https://doi.org/10.1589/jpts.25.821
  11. K. Enez, S. S. Nalbantoglu(2019), "Comparison of ergonomic risk assessment outputs from OWAS and REBA in forestry timber harvesting." International Journal of Industrial Ergonomics, 70:51-57. https://doi.org/10.1016/j.ergon.2019.01.009
  12. L. McAtamney, E. N. Corlett(1993), "RULA: A survey method for the investigation of work-related upper limb disorders." Applied Ergonomics, 24(2):91-99. https://doi.org/10.1016/0003-6870(93)90080-S
  13. M. E. Chiasson, D. Imbeau, K. Aubry, A. Delisle(2012), "Comparing the results of eight methods used to evaluate risk factors associated with musculoskeletal disorders." International Journal of Industrial Ergonomics, 42:478-488. https://doi.org/10.1016/j.ergon.2012.07.003
  14. M. Gomez-Galan, a. J. Callejon-Ferre, J. Perez-Alonso, M. Diaz-Perez, J. A. Carrillo-Castrillo (2020), "Musculoskeletal risks: RULA bibliometric review." International Journal of Environmental Research and Public Health, 17(12):4354. https://doi.org/10.3390/ijerph17124354
  15. M. Gomez-Galan, J. Perez-Alonso, a. J. Callejon-Ferre, J. Lopez-Martinez(2017), "Musculoskeletal disorders: OWAS review." Industrial Health, 55:314-337. https://doi.org/10.2486/indhealth.2016-0191
  16. M. Hita-Gutierrez, M. Gomez-Galan, M. Diaz-Perez, a. J. Callejon-Ferre(2020), "An overview of REBA method applications in the world." International Journal of Environmental Research and Public Health, 17(8):2635. https://doi.org/10.3390/ijerph17082635
  17. M. Joshi, V. Deshpande(2019), "A systematic review of comparative studies on ergonomic assessment techniques." International Journal of Industrial Ergonomics, 74:1-14.
  18. Ministry of Employment and Labor(2019, 2020), Industrial accident analysis. Ministry of Employment and Labor, Sejong.
  19. O. Karhu, P. Kansi, I. Kuorinka(1977), "Correcting working postures in industry: A practical method for analysis." Applied Ergonomics, 8(4):199-201. https://doi.org/10.1016/0003-6870(77)90164-8
  20. P. Mukhopadhyay, A. Khan(2015), "The evaluation of ergonomic risk factors among meat cutters working in Jabalpur, India." International Journal of Occupational and Environmental Health, 21(3):192-198. https://doi.org/10.1179/2049396714Y.0000000064
  21. P. Wintachai, N. Charoenchai(2012), "The comparison of ergonomics postures assessment methods in rubber sheet production." IEEE International Conference, Thailand.
  22. S. Hignett, L. McAtamney(2000), "Rapid Entire Body Assessment(REBA)." Applied Ergonomics, 31:201-205. https://doi.org/10.1016/S0003-6870(99)00039-3
  23. S. Sahu, S. Moitra, S. Maity(2013), "A comparative ergonomics postural assessment of potters and sculptors in the unorganized sector in West Bengal, India." International Journal of Occupational Safety and Ergonomics, 19(3):455-462. https://doi.org/10.1080/10803548.2013.11077001
  24. U. O. Saliha, H. H. Acar, A. Kaya(2017), "Determination of work postures with different ergonomic risk assessment methods in forest nurseries." Fresenius Environmental Bulletin, 26(12):7362-7371.
  25. Upasana, D. Vinay(2017), "Work posture assessment of tailors by RULA and REBA analysis." International Journal of Science, Environment, 6(4):2469-2474.
  26. V. Kulkarni, R. Devalkar(2018), "Postural analysis of building construction workers using ergonomics." International Journal of Construction Management, 19(6):1-8.
  27. V. Z. Priel(1974), "A numerical definition of posture." Human Factors, 16:576-584. https://doi.org/10.1177/001872087401600602
  28. Y. K. Kong, S. Y. Lee, K. S. Lee, D. M. Kim(2017), "Comparisons of ergonomic evaluation tools (ALLA, RULA, REBA and OWAS) for farm work." International Journal of Occupational Safety and Ergonomics, 24(2):218-223.