과제정보
본 연구는 한국지역난방공사와 2021년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 연구를 수행하였습니다(P0002019, 2021년 산업전문인력역량강화사업).
참고문헌
- H. Lee, H. Chae, J. Cho, W. C. Kim, J. C. Jeong, H. Kim, J. Kim, and S. Y. Lee, Corrosion Failure Analysis of Air Vents Installed at Heat Transport Pipe in District Heating System, Corrosion Science and Technology, 19, 189 (2020). Doi: https://doi.org/10.14773/cst.2020.19.4.189
- J. Cho, H. Chae, H. Kim, J. Kim, W. C. Kim, J. Kim, and S. Y. Lee, Failure Analysis of Air Vent Connected with Heat Supply Pipeline Under Manhole, Corrosion Science and Technology, 19, 196 (2020). Doi: https://doi.org/10.14773/cst.2020.19.4.196
- Corrosion failures(Eds: K. Elayaperumal, V. S. Raja), pp. 88 - 92, Wiley, Hoboken, NJ (2015).
- W. Faes, S. Lecompte, Z. Y. Ahmed, J. V. Bael, R. Salenbien, K. Verbeken, and M. D. Paepe, Corrosion and corrosion prevention in heat exchangers, Corrosion Reviews, 37, 2 (2019). Doi: https://doi.org/10.1515/corrrev-2018-0054
- Z. D. Fan, J. S. Du, Z. B. Zhang, Y. C. Ma, S. Y. Cao, K. Niu, and C. X. Liu, Internal leakage of plate heat exchangers caused by cooperation of pitting, crevice corrosion, and fretting, Engineering Failure Analysis, 96, 340 (2019). Doi: https://doi.org/10.1016/j.engfailanal.2018.10.007
- K. M. Deen, M. A. Virk, C. I. Haque, R. Ahmad, and I. H. Khan, Failure investigation of heat exchanger plates due to pitting corrosion, Engineering Failure Analysis, 17, 886 (2010). Doi: https://doi.org/10.1016/j.engfailanal.2009.10.023
- J. Marjanowski, Leakages and Scaling in Stainless Steel Heat Exchangers, European Journal of Engineering Research and Science, 4, 4 (2019). Doi: http://dx.doi.org/10.24018/ejers.2019.4.8.1424
- S.H. Khodamorad, N. Alinezhad, D. Haghshenas Fatmehsari, and K. Ghahtan, Stress corrosion cracking in Type.316 plates of a heat exchanger, Case Studies in Engineering Failure Analysis, 5, 59 (2016). Doi: http://dx.doi.org/10.1016/j.csefa.2016.03.001
- ASM Handbook, Vol. 13B (Eds: S. D. Cramer, J. Bernard, S. Covino), pp.78-84, ASM International, Materials Park, OH (2005).
- T. Ohmi, Y. Nakagawa, M. Nakamura, A. Ohki, and T. Koyama, Formation of chromium oxide on 316L austenitic stainless steel, Journal of Vaccum Science and Technology A, 14, 2505 (1996). Doi: http://dx.doi.org/10.1116/1.580010
- E. D. Mackey and T. F. Seacord, Guidelines for Using Stainless Steel in the Water and Desalination Industries, Journal American Water Works Association, 5, E158 (2017). Doi: https://doi.org/10.5942/jawwa.2017.109.0044
- S. Kim, J. Lee, J. Kim, and W. Kim, Effect of the Crevice Former on the Corrosion Behavior of 316L Stainless Steel in Chloride-Containing Synthetic Tap Water, Metals and materials international, 24, 516 (2018). Doi: https://doi.org/10.1007/s12540-018-0062-2