DOI QR코드

DOI QR Code

FEM analysis of the modular prefabricated steel-concrete composite beam-column internal joint under reciprocating action

  • Wu, Cheng Long (Department of Civil Engineering, Qingdao University of Technology) ;
  • Kan, Jian Cheng (Department of Civil Engineering, Qingdao University of Technology) ;
  • Wang, Qi Hui (Department of Civil Engineering, Qingdao University of Technology) ;
  • Liu, Ji Ming (Department of Civil Engineering, Qingdao University of Technology) ;
  • Li, Zun Qiang (Department of Civil Engineering, Qingdao University of Technology)
  • 투고 : 2021.01.16
  • 심사 : 2021.08.10
  • 발행 : 2021.10.10

초록

Prefabricated steel-concrete composite structure has the advantages of large bearing capacity, reliable connection, and good durability, which is of great significance to the development of building industrialization. In this paper, a finite element model (FEM) of the modular prefabricated SRC column-steel beam composite joint is established and verified its accuracy through ABAQUS. The effects of various parameter variables on the hysteresis curve, skeleton curve, ductility, energy consumption, and performance deterioration are investigated. The results show that as the axial compression ratio increases, the joint bearing capacity first increases and then decreases, the strength and stiffness have relatively stable degradation characteristics. However, the hysteresis curve has a certain "pinch" phenomenon, which reduces the energy consumption performance. Different column end bolts margin and apertures have little effect on the bearing capacity, strength and stiffness degradation performance, but affect energy consumption and ductility. The width-to-thickness ratio of the square steel tube has a greater impact on the bearing capacity, energy consumption and ductility, and has less impact on the strength and stiffness degradation performance. As the thickness of the joint cover plate increases, the bearing capacity, energy consumption and initial stiffness of the joint gradually increase, the ductility first increases and then decreases.

키워드

과제정보

The writers gratefully acknowledge the support for this work, which was funded by the National Natural Science Foundation of China (51078195), the Shandong University Scientific Research Program (A 2018-065).

참고문헌

  1. ABAQUS (2014), User's Manual, Version 6.14; Dassault Systemes Corp., Providence, RI, USA.
  2. ACI318 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  3. Alizadeh, S., Attari, N. and Kazemi, M.T. (2013), "The seismic performance of new detailing for RCS connections", J. Constr. Steel Res., 91, 76-88. https://doi.org/10.1016/j.jcsr.2013.08.010.
  4. Bai, Y.T., Wang, S.H., Mou, B., Wang, Y. and Skalomenos, K.A. (2021), "Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener", Eng. Struct., 227, 11443. https://doi.org/10.1016/j.engstruct.2020.111443.
  5. Bursi, O.S. and Jaspart, J.P. (1997), "Benchmarks for finite element modelling of bolted steel connections", J. Constr. Steel Res., 43(1-3), 17-42. https://doi.org/10.1016/S0143-974X(97)00031-X.
  6. Cook, R.D. and Saunders H. (2002), Concepts and Applications of Finite Element Analysis, (2nd Ed.), John Wiley & Sons Inc, New York, USA.
  7. Eurocode (2006), Design of concrete structures, Part 1.1: General rules and rules for buildings, European Committee for Standardization; Brussels, Belgium.
  8. GB50010-2010 (2010), Code for design of concrete structures, China Architecture & Building Press; Beijing, China.
  9. Hadianfard, M.A. and Rahnema H. (2010), "Effects of RHS face deformation on the rigidity of beam-column connection", Steel. Compos. Struct., 10(6), 489-500. https://doi.org/10.12989/scs.2010.10.6.489.
  10. Hajjar, J.F. (2002). "Composite steel and concrete structural systems for seismic engineering", J. Constr. Steel Res., 58(5), 703-723. https://doi.org/10.1016/S0143-974X(01)00093-1.
  11. JGJ/T 101-2015(2015), Code for seismic design of buildings, Ministry of Housing and Urban-Rural Development of the People's Republic of China; Beijing, China.
  12. Kim, S., Hong, W.K., Kim, J.H. and Kim J.T. (2013), "The development of modularized construction of enhanced precast composite structural systems (smart green frame) and its embedded energy efficiency", Energy Build., 66(5), 16-21. https://doi.org/10.1016/j.enbuild.2013.07.023.
  13. Kim, S.H., Jung, C.Y. and Ann, J.H. (2011), "Ultimate strength of composite structure with different degrees of shear connection", Steel Compos. Struct., 11(5), 375-390. https://doi.org/10.12989/scs.2011.11.5.375.
  14. Liu, X.C., He, X.N., Wang, H.X., Yang, Z.W., Pu, S.H. and Ailin Z. (2018), "Bending-shear performance of column-to-column bolted-flange connections in prefabricated multi-high-rise steel structures", J. Constr. Steel Res., 145, 28-48. https://doi.org/10.1016/j.jcsr.2018.02.017.
  15. Liu, X.C., Zhan, X.X. Pu, S.H., Zhang, A.L. and Xu, L. (2018), "Seismic performance study on slipping bolted truss-to-column connections in modularized prefabricated steel structures", Eng. Struct., 163, 241-254. https://doi.org/10.1016/j.engstruct.2018.02.043.
  16. Ma, H.W., Jiang, W.S. and Cho, C.D. (2011), "Experimental study on two types of new beam-to-column connections", Steel Compos. Struct., 11(4), 291-305. https://doi.org/10.12989/scs.2011.11.4.291.
  17. Mou, B., Li, Y.Z., Wang, F.Y., Pan, W. and Zhao, Y. (2021a), "Flexural behavior of a novel high-strength RCFST column-to-column connection", Thin-Wall. Struct., 159, 107274. https://doi.org/10.1016/j.tws.2020.107274.
  18. Mou, B., Zhao, F., Qiao, Q.Y., Li, H., He, B. and Hao, Z. (2019a), "Flexural behavior of beam to column joints with or without an overlying Concrete Slab", Eng. Struct., 199(11), https://doi.org/10.1016/j.engstruct.2019.109616.
  19. Mou, B., Zhao, F., Wang, F.Y. and Pan, W. (2021c), "Effect of reinforced concrete slab on the flexural behavior of composite beam to column joints: Parameter study and evaluation formulae", J. Constr. Steel Res., 176, 106425. http://dx.doi.org/10.1016/j.jcsr.2020.106425.
  20. Mou, B., Zhou, W.Q., Qiao, Q.Y., Feng, P. and Wu, C.L. (2021b), "Column base joint made with ultrahigh-strength steel bars and steel tubular: An experimental study", Eng. Struct., 228, 111483. https://doi.org/10.1016/j.engstruct.2020.111483.
  21. Nunez, E., Torres, R. and Herrera, R. (2017), "Seismic performance of moment connections in steel moment frames with HSS columns", Steel Compos. Struct., 25(3), 271-286. http://dx.doi.org/10.12989/scs.2017.25.3.271.
  22. Nzabonimpa, J.D. and Hong, W.K. (2019), "Experimental and nonlinear numerical analysis of precast concrete column splices with high-yield metal plates", J. Struct. Eng., 145(2), 04018254. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002233.
  23. Nzabonimpa, J.D., Hong, W.K. and Kim, J. (2017), "Nonlinear finite element model for the novel mechanical beam-column joints of precast concrete-based frames", Comput. Struct., 189, 31-48. http://doi.org/10.1016/j.compstruc.2017.04.016.
  24. Qiao, Q.Y., Zhang, W.W., Mou, B. and Cao, W. (2019) "Seismic behavior of exposed concrete filled steel tube column bases with embedded reinforcing bars: Experimental investigation", Thin-Wall. Struct., 136(3), 367-381. https://doi.org/10.1016/j.tws.2018.12.039.
  25. Quan, C.Y., Wang, W. and Chan, T.M. (2017), "FE modelling of replaceable I-beam-to-CHS column joints under cyclic loads", J. Constr. Steel Res., 138, 221-234. https://doi.org/10.1016/j.jcsr.2017.07.012.
  26. Saberi, V., Gerami, M. and Kheyroddin, A. (2014), "Comparison of bolted end plate and t-stub connection sensitivity to component thickness", J. Constr. Steel Res., 98, 134-145. https://doi.org/10.1016/j.jcsr.2014.02.012.
  27. Sabuwala, T., Linzell, D. and Krauthammer, T. (2005), "Finite element analysis of steel beam to column connections subjected to blast loads", Int. J. Impact Eng., 31(7), 861-876. https://doi.org/10.1016/j.ijimpeng.2004.04.013.
  28. Song, Y., Uy, B. and Wang, J. (2019), "Numerical analysis of stainless steel-concrete composite beam-to-column joints with bolted flush endplates", Steel Compos. Struct., 33(1), 143-162. https://doi.org/10.12989/scs.2019.33.1.143.
  29. Song, Y.C., Wang, R.P. and Li, J. (2016) "Local and post-local buckling behavior of welded steel shapes in partially encased composite columns", Thin-Wall. Struct., 108, 93-108. https://doi.org/10.1016/j.tws.2016.08.003.
  30. Soy, U. (2012), "Numerical modelling of stress and deflection behaviourfor welded steel beam-column", Steel Compos. Struct., 12(3), 249-260. https://doi.org/10.12989/scs.2012.12.3.249.
  31. Wang, J., Uy, B. and Li, D. (2019), "Behaviour of large fabricated stainless steel beam-to-tubular column joints with extended endplates", Steel Compos. Struct., 32(1), 141-156. https://doi.org/10.12989/scs.2019.32.1.141.
  32. Wang, Q., Shi, Q. and Tian, H. (2015), "Seismic behavior of steel reinforced concrete (SRC) joints with new-type section steel under cyclic loading", Steel Compos. Struct., 19(6), 1561-1580. https://doi.org/10.12989/SCS.2015.19.6.1561.
  33. Wu, C.L., Liu, J.M., Tan, W.Y. and Wang, P.F. (2019), "Seismic behavior of composite interior joints of prefabricated H-shaped steel reinforced concrete column - steel beam", Structures, 23, 558-572. https://doi.org/10.1016/j.istruc.2019.11.008.
  34. Wu, C.L., Liu, J.M., Wang, Q.H., et al. (2020). "Mechanical properties of modular prefabricated steel-concrete composite internal joints under cyclic loading", J. Constr. Steel Res., 178(5), 106463. https://doi.org/10.1016/j.jcsr.2020.106463.
  35. Yang, J., Liang, S.T., Zhu, X.J. and Dang, L. (2021), "Seismic behavior and failure modes analysis of lapping-connection between CFRST-columns and RC-beams", J. Constr. Steel Res., 184, 106790. https://doi.org/10.1016/j.jcsr.2021.106790.
  36. Yu, Y.S., Zhang, A.J., Pan, W., Mou, B. and Liu, X.Y. (2021), "Seismic performance of beam-column connections with welded upper flange and bolted lower flange", J. Constr. Steel Res., 182, 106697. https://doi.org/10.1016/j.jcsr.2021.106697.
  37. Zahrai, S.M. and Jalali, M. (2014), "Experimental and analytical investigations on seismic behavior of ductile steel knee braced frames", Steel Compos. Struct., 16(1), 1-21. https://doi.org/10.12989/scs.2014.16.1.001.
  38. Zhang, A.L., et al. (2020), "Low cycle reciprocating tests of earthquake-resilient prefabricated column-flange beam-column joints with different connection forms", J. Constr. Steel Res., 164, 105771. https://doi.org/10.1016/j.jcsr.2019.105771.
  39. Zhang, A.L., Li, X.Y., Jiang, Z.Q., Zhou, B.R. and Cai, C. (2021), "Experimental study of earthquake-resilient prefabricated composite joint with T-shape connector", J. Constr. Steel Res., 184, 106831. https://doi.org/10.1016/j.jcsr.2021.106831.