DOI QR코드

DOI QR Code

Stability evaluation of a proportional valve controller for forward-reverse power shuttle control of agricultural tractors

  • Jeon, Hyeon-Ho (Department of Smart Agricultural Systems, Chungnam National University) ;
  • Kim, Taek-Jin (Research and Development Institute, TYM Co., Ltd.) ;
  • Kim, Wan-Soo (Institute of Agricultural Science, Chungnam National University) ;
  • Kim, Yeon-Soo (Department of Biosystems Machinery Engineering, Chungnam National University) ;
  • Choi, Chang-Hyun (Department of Bio-Mechatronics Engineering, Sungkyunkwan University) ;
  • Kim, Yong-Hyeon (Gint Co., Ltd.) ;
  • Kim, Yong-Joo (Department of Smart Agricultural Systems, Chungnam National University)
  • Received : 2021.06.28
  • Accepted : 2021.08.18
  • Published : 2021.09.01

Abstract

Due to the characteristics of the farmland in Korea, forward and reverse shift is the most used. The fatigue of farmers is caused by forward and reverse shifting with a manual transmission. Therefore, it is necessary to improve the convenience of forward and backward shifting. This study was a basic study on the development of a current control system for forward and reverse shifting of agricultural tractors using proportional control valves and a controller. A test bench was fabricated to evaluate the current control accuracy of the control system, and the stability of the controller was evaluated through CPU (central processing unit) load measurements. A controller was selected to evaluate the stability of the proportional valve controller. The stability evaluation was performed by comparing and analyzing the command current of the controller and the actual current measured. The command current was measured using a CAN (controller area network) communication device and DAQ (data acquisition). The actual current was measured with a current probe and an oscilloscope. The control system and stability evaluation was performed by measuring the CPU load on the controller during control operations. The average load factor was 12.27%, and when 5 tasks were applied, it was shown to be 70.65%. This figure was lower than the CPU limit of 74.34%, when 5 tasks were applied and was judged to be a stable system.

Keywords

Acknowledgement

본 논문은 농림축산식품부의 재원으로 농림식품기술기획평가원의 첨단농기계산업화기술개발사업(321062-02) 및 첨단생산기술개발사업(319041-03)의 지원을 받아 연구되었음.

References

  1. Ahn DV, Kim KD, Yu JH, Kim SC, Lee JW, Park YJ. 2020. Development of current control model of proportional control valve for agricultural tractor with power shuttle transmission. Journal of Agriculture & Life Science 54:121-128. [in Korean] https://doi.org/10.14397/jals.2020.54.3.121
  2. Choi CH, Woo MN, Lee DH, Kim YJ, Jeong JH. 2010. Development of electric actuator position control system for automatic shuttle shifting of tractor. Journal of Biosystems Engineering 35:224-230. [in Korean] https://doi.org/10.5307/JBE.2010.35.4.224
  3. Han YM, Min CG. 2013. Performance evaluation of vehicle gear-shifting supportive device utilizing MR haptic cue. Transactions of the Korean Society for Noise and Vibration Engineering 23:160-166. [in Korean] https://doi.org/10.5050/KSNVE.2013.23.2.160
  4. Jung GH. 2010. Design of position controller for proportional solenoid valve using system identification. Journal of Drive and Control 7:98-106. [in Korean]
  5. Jung GH, Lee GH. 2006. A development of proportional control solenoid valve performance tester for automatic transmission. Journal of Drive and Control 3:86-93. [in Korean]
  6. KAMICO (Korea Agricultural Machinery Industry Cooperative) and KSAM (Korean Society for Agricultural Machinery). 2019. Agricultural machinery yearbook Republic of Korea. p. 134. KAMICO and KSAM, Cheonan, Korea. [in Korean]
  7. Kim DC, Lee JK, Kang YS, Lee JC. 2009. Experimental investigation on PWM control of power-shift transmission hydraulic system. Transactions of The Korea Fluid Power Systems Society 6:10-15. [in Korean]
  8. Kim WS, Kim YJ, Park SU, Hong SJ, Kim YS. 2019. Work load analysis for determination of the reduction gear ratio for a 78 kW all wheel drive electric tractor design. Korean Journal of Agricultural Science 46:613-627. [in Korean] https://doi.org/10.7744/KJOAS.20190047
  9. Kim YH, Kim TJ, Kim YJ. 2020. Development trend of forward-reverse shuttle control technology for agricultural tractor. Journal of Drive and Control 17:62-67. [in Korean]
  10. Kim YJ, Lee DH, Chung SO, Park SJ, Choi CH. 2011. Analysis of power requirement of agricultural tractor during baler operation. Journal of Biosystems Engineering 36:243-251. [in Korean] https://doi.org/10.5307/JBE.2011.36.4.243
  11. Lee CJ, Ha JW, Choi DS, Kim HJ. 2015. Development of a self-leveling system for the bucket of an agricultural frontend loader using an electro hydraulic proportional valve and a tilt sensor. Journal of Drive and Control 12:60-70. [in Korean] https://doi.org/10.7839/ksfc.2015.12.4.060
  12. Lee JS, Kang YS. 2018. An experimental study of model predictive control method for autonomous vehicles under severe steering & braking maneuver. Transactions of the Korean Society of Mechanical Engineers - A 42:221-230. [in Korean] https://doi.org/10.3795/ksme-a.2018.42.3.221
  13. Liu CL, Layland JW. 1973. Scheduling algorithms for multiprogramming in a hard-real-time environment. Journal of the Association for Computing Machiner 20:46-61. https://doi.org/10.1145/321738.321743
  14. Oh KS. 2019. Development of a gradient method-based longitudinal control algorithm for autonomous vehicles in inverse time-to-collision and time headway domain. Transactions of the Korean Society of Mechanical Engineers - A 43:393-399. [in Korean] https://doi.org/10.3795/KSME-A.2019.43.6.393
  15. Yun SN, Ham YB, Park JH. 2016. A study on response improvement of a proportional solenoid actuator. Journal of Drive and Control 13:47-52. [in Korean] https://doi.org/10.7839/ksfc.2016.13.3.047