Structural Engineering and Mechanics

  • 제79권5호
  • /
  • Pages.593-599
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mathematical approach for the effect of the rotation, the magnetic field and the initial stress in the non-homogeneous an elastic hollow cylinder

  • Al-Basyouni, K.S. (Department of Mathematics, Faculty of Science, King Abdulaziz University) ;
  • Mahmoud, S.R. (GRC Department, Faculty of Applied Studies, King Abdulaziz University)
  • 투고 : 2019.12.29
  • 심사 : 2021.07.02
  • 발행 : 2021.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

The present paper investigates the frequencies based on the radial vibrations of a non-homogeneous elastic cylinder using different boundary conditions (BCs) under the rotating, non-homogeneity, and magnetic field effects. Three different BCs, the free, mixed, and fixed, are implemented. The solution is related to using the eigenvalues based on the radial vibrations frequencies for different boundary conditions in harmonic vibrations. The numeric outcomes are demonstrated graphically for each case-the comparison of the results in the nonappearance and variation of the non-homogeneity, rotating effects, and magnetic field. The obtained outcomes specify the rotating, non-homogeneity, and magnetic field effects.

키워드

과제정보

This project was funded by the Deanship of Scientific Research (DSR) at King Abdulaziz University, Jeddah, under grant No. (130-201-D1439). The authors, therefore, acknowledge with thanks DSR for technical and financial support

참고문헌

  1. Abd-Alla, A.M., Nofal, T.A. and Farhan, A.M. (2008), "Effect of the non-homogenity on the composite infinite cylinder of isotropic material", Phys. Lett. A, 372(29), 4861-4864.. https://doi.org/10.1016/j.physleta.2008.01.088.
  2. Al-Basyouni, K.S. and Mahmoud, S.R. (2021), "Effect of the magnetic field, initial stress, rotation, and nonhomogeneity on stresses in orthotropic material", Phys. Mesomech., 24(3), 303-310. https://doi.org/10.1134/S1029959921030085.
  3. Al-Basyouni, K.S., Dakhel, B., Ghandourah, E. and Algarni, A. (2020a), "An analytical solution for the problem of stresses in magneto-piezoelectric thermoelastic material under the influence of rotation", Phys. Mesomech., 23(4), 362-368. https://doi.org/10.1134/S1029959920040116.
  4. Al-Basyouni, K.S., Ghandourah, E., Mostafa, H.M. and Algarni, A. (2020b), "Effect of the rotation on the thermal stress wave propagation in non-homogeneous viscoelastic body", Geomech. Eng., 21(1), 1-9. https://doi.org/10.12989/gae.2020.21.1.001.
  5. Alwabli, A.S., Kaci, A., Bellifa, H., Bousahla, A.A., Tounsi, A., Alzahrani, D.A., ... & Hussain, M. (2021), "The nano scale buckling properties of isolated protein microtubules based on modified strain gradient theory and a new single variable trigonometric beam theory", Adv. Nano Res., 10(1), 15. http://doi.org/10.12989/anr.2021.10.1.015.
  6. Bakhadda, B., Bouiadjra, M.B., Bourada, F., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "Dynamic and bending analysis of carbon nanotube-reinforced composite plates with elastic foundation", Wind Struct., 27(5), 311-324. http://doi.org/10.12989/was.2018.27.5.311.
  7. Belbachir, N., Bourada, M., Draiche, K., Tounsi, A., Bourada, F., Bousahla, A.A. and Mahmoud, S.R. (2020), "Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory", Smart Struct. Syst., 25(4), 409-422. https://doi.org/10.12989/sss.2020.25.4.409.
  8. Bellal, M., Hebali, H., Heireche, H., Bousahla, A.A., Tounsi, A., Bourada, F., Mahmoud, S.R., Adda Bedia, E.A. and Tounsi, A. (2020), "Buckling behavior of a single-layered graphene sheet resting on viscoelastic medium via nonlocal four-unknown integral model", Steel Compos. Struct., 34(5), 643-655. https://doi.org/10.12989/scs.2020.34.5.643.
  9. Benmansour, D.L., Kaci, A., Bousahla, A.A., Heireche, H., Tounsi, A., Alwabli, A.S., ... & Mahmoud, S.R. (2019), "The nano scale bending and dynamic properties of isolated protein microtubules based on modified strain gradient theory", Adv. Nano Res., 7(6), 443-457. https://doi.org/10.12989/anr.2019.7.6.443.
  10. Bourada, F., Bousahla, A.A., Tounsi, A., Adda Bedia, E.A., Mahmoud, S.R., Benrahou, K.H. and Tounsi, A. (2020a), "Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation", Comput. Concrete, 25(6), 485-495. https://doi.org/10.12989/cac.2020.25.6.485.
  11. Bousahla, A.A., Bourada, F., Mahmoud, S.R., Tounsi, A., Algarni, A., Adda Bedia, E.A. and Tounsi, A. (2020b), "Buckling and dynamic behavior of the simply supported CNT-RC beams using an integral-first shear deformation theory", Comput. Concrete, 25(2), 155-166. https://doi.org/10.12989/cac.2020.25.2.155.
  12. Dutta, G., Panda, S.K., Mahapatra, T.R. and Singh, V.K., (2017), "Electro-magneto-elastic response of laminated composite plate: A finite element approach", Int. J. Appl. Comput. Math., 3(3), 2573-2592. https://doi.org/10.1007/s40819-016-0256-6.
  13. Ghandourah, E. (2021), "Nonlocal elasticity theory for the mechanical behavior of protein microtubules", Phys. Mesomech., 24(3), 319-325. https://doi.org/10.1134/S1029959921030103.
  14. Ghasemi, A.R. and Hosseinpour, K. (2018), "Thermo-magnetomechanical long-term creep behavior of three-phase nanocomposite cylinder", Compos. Sci. Technol., 167, 71-78. https://doi.org/10.1016/j.compscitech.2018.07.028.
  15. Ghasemi, A.R. and Meskini, M. (2019), "Free vibration analysis of porous laminated rotating circular cylindrical shells", J. Vib. Control, 25(18), 2494-2508. https://doi.org/10.1177/1077546319858227.
  16. Ghasemi, A.R. and Mohandes, M. (2017), "Nonlinear free vibration of laminated composite Euler-Bernoulli beams based on finite strain using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(11), 917-923. https://doi.org/10.1080/15376494.2016.1196794.
  17. Ghasemi, A.R. and Mohandes, M. (2019), "Free vibration analysis of rotating fiber-metal laminate circular cylindrical shells", J. Sandw. Struct. Mater., 21(3), 1009-1031. https://doi.org/10.1177/1099636217706912.
  18. Ghasemi, A.R., Taheri-Behrooz, F., Farahani, S.M.N. and Mohandes, M. (2016), "Nonlinear free vibration of an Euler-Bernoulli composite beam undergoing finite strain subjected to different boundary conditions", J. Vib. Control, 22(3), 799-811. https://doi.org/10.1177/1077546314528965.
  19. Hetnarski, R.B. and Ignaczak, J. (2016), The Mathematical Theory of Elasticity, CRC Press.
  20. Heydarpour, Y., Malekzadeh, P., Dimitri, R. and Tornabene, F. (2020), "Thermoelastic analysis of rotating multilayer FG-GPLRC truncated conical shells based on a coupled TDQM-NURBS scheme", Compos. Struct., 235, 111707. https://doi.org/10.1016/j.compstruct.2019.111707.
  21. Katariya, P.V., Das, A. and Panda, S.K. (2018), "Buckling analysis of SMA bonded sandwich structure-using FEM", IOP Conf. Ser.: Mater. Sci. Eng., 338(1), 012035.
  22. Katariya, P.V., Panda, S.K., Hirwani, C.K., Mehar, K. and Thakare, O. (2017), "Enhancement of thermal buckling strength of laminated sandwich composite panel structure embedded with shape memory alloy fibre", Smart Struct. Syst., 20(5), 595-605. http://doi.org/10.12989/sss.2017.20.5.595.
  23. Khadimallah, M.A., Safeer, M., Taj, M., Ayed, H., Hussain, M., Bouzgarrou, S.M., ... & Tounsi, A. (2020) "The effects of the surrounding viscoelastic media on the buckling behavior of single microfilament within the cell: A mechanical model", Adv. Concrete Constr., 10(2), 141. https://doi.org/10.12989/acc.2020.10.2.141.
  24. Mahmoud, S.R., Al-Solami, H.M., Alkenani, N., Alhebshi, A.M., Alwabli, A.S. and Bahieldin, A. (2020), "A mechanical model to investigate Aedesaegypti mosquito bite using new techniques and its applications", Membr. Water Treat., 11(6), 399. http://doi.org/10.12989/mwt.2020.11.6.399.
  25. Menasria, A., Kaci, A., Bousahla, A.A., Bourada, F., Tounsi, A., Benrahou, K.H., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2020), "A four-unknown refined plate theory for dynamic analysis of FG-sandwich plates under various boundary conditions", Steel Compos. Struct., 36(3), 355-367. https://doi.org/10.12989/scs.2020.36.3.355.
  26. Meskini, M. and Ghasemi, A.R. (2020), "Electro-magnetic potential effects on free vibration of rotating circular cylindrical shells of functionally graded materials with laminated composite core and piezo electro-magnetic two face sheets", J. Sandw. Struct. Mater., 1099636220909751. https://doi.org/10.1177/1099636220909751.
  27. Mohandes, M. and Ghasemi, A.R. (2016), "Finite strain analysis of nonlinear vibrations of symmetric laminated composite Timoshenko beams using generalized differential quadrature method", J. Vib. Control, 22(4), 940-954. https://doi.org/10.1177/1077546314538301.
  28. Panda, S.K. and Singh, B.N. (2013), "Large amplitude free vibration analysis of thermally post-buckled composite doubly curved panel embedded with SMA fibers", Nonlin. Dyn., 74(1), 395-418. https://doi.org/10.1007/s11071-013-0978-5.
  29. Panda, S.K. and Singh, B.N. (2013), "Post-buckling analysis of laminated composite doubly curved panel embedded with SMA fibers subjected to thermal environment", Mech. Adv. Mater. Struct., 20(10), 842-853. https://doi.org/10.1080/15376494.2012.677097.
  30. Rabhi, M., Benrahou, K.H., Kaci, A., Houari, M.S.A., Bourada, F., Bousahla, A.A., Tounsi, A., Adda Bedia, E.A., Mahmoud, S.R., Tounsi, A. (2020), "A new innovative 3-unknowns HSDT for buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Geomech. Eng., 22(2). 119-132. https://doi.org/10.12989/gae.2020.22.2.119.
  31. Ramady, A., Dakhel, B., Balubaid, M. and Mahmoud, S.R. (2020), "A mathematical approach for the effect of the rotation on thermal stresses in the piezo-electric homogeneous material", Comput. Concrete, 25(5), 471-478. https://doi.org/10.12989/cac.2020.25.5.471.
  32. Ramady, A., Mahmoud, S.R. and Atia, H.A. (2020), "A theoretical approach in 2d-space with applications of the periodic wave solutions in the elastic body", Membr. Water Treat., 11(4), 295-302. https://doi.org/10.12989/mwt.2020.11.4.295.
  33. Sadoun, M., Houari, M.S.A., Bakora, A., Tounsi, A., Mahmoud, S.R. and Alwabli, A.S. (2018), "Vibration analysis of thick orthotropic plates using quasi 3D sinusoidal shear deformation theory", Geomech. Eng., 16(2), 141-150. http://doi.org/10.12989/gae.2018.16.2.141.
  34. Singh, V.K. and Panda, S.K. (2015), "Large amplitude free vibration analysis of laminated composite spherical shells embedded with piezoelectric layers", Smart Struct. Syst., 16(5), 853-872. http://doi.org/10.12989/sss.2015.16.5.853.
  35. Singh, V.K., Hirwani, C.K., Panda, S.K., Mahapatra, T.R. and Mehar, K. (2019a), "Numerical and experimental nonlinear dynamic response reduction of smart composite curved structure using collocation and non-collocation configuration", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233(5), 1601-1619. https://doi.org/10.1177/0954406218774362.
  36. Singh, V.K., Hirwani, C.K., Panda, S.K., Mahapatra, T.R. and Mehar, K. (2019b), "Numerical and experimental nonlinear dynamic response reduction of smart composite curved structure using collocation and non-collocation configuration", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233(5), 1601-1619. https://doi.org/10.1177/0954406218774362.
  37. Singh, V.K., Mahapatra, T.R. and Panda, S.K. (2016a), "Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator", Compos. Struct., 157, 121-130. https://doi.org/10.1016/j.compstruct.2016.08.020.
  38. Singh, V.K., Mahapatra, T.R. and Panda, S.K. (2016b), "Nonlinear flexural analysis of single/doubly curved smart composite shell panels integrated with PFRC actuator", Eur. J. Mech.-A/Solid., 60, 300-314. https://doi.org/10.1016/j.euromechsol.2016.08.006.
  39. Tornabene, F. (2019), "On the critical speed evaluation of arbitrarily oriented rotating doubly-curved shells made of functionally graded materials", Thin Wall. Struct., 140, 85-98. https://doi.org/10.1016/j.tws.2019.03.018.