과제정보
This study was supported by the Basic Science Research Program through the NRF of Korea (NRF) funded by the MEST (NRF-2020R1A2C1011958).
참고문헌
- Noh, M. J., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "System Design for Laser Scanning Unit using A3," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 71-72, 2011.
- Yoo, K. S., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "Injection Molding of a Laser Scanning Unit Optical System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 102-103, 2011.
- Rober,t E., Hopkins and D. Stephenson, Optical Scanning(Marcel Dekker), pp. 27~82, 1991.
- Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 11, pp. 163~170, 2004.
- Kim, S. S., Kim, H. K., Jeong, S. H., Kim, H. J., Kim, J. H., "Development of f-theta Lens for Laser Beam Printer", Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 19, No. 4, pp. 386-390, 2006. https://doi.org/10.4313/JKEM.2006.19.4.386
- Jeong, I. S., Ban, M. S, Son,, K. E., and Lee, B. B., "Development of Ftheta Lens for Laser Scanning Unit", Transactions of the KSME C: Technology and Innovation, Vol. 1, No. 1, pp. 13-19, 2013. https://doi.org/10.3795/KSME-C.2013.1.1.013
- Rim, C. S., "The effect analysis of birefringence of plastic f-theta lens on the beam diameter", Korean Journal of the Optics and Photonics, Vol. 11, No. 2, pp. 73-79, 2000.
- Bringans, R. D., "Application of Blue Diode Lasers to Printing", Proc. of Materials Research Society Symposium, Vol. 482, pp. 1203-1210, 1998.
- Sakuma, N., "Aspherical Surface in the Laser Writing Optics", Optical Design, No. 17, pp. 9-15, 1999.
- Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics", Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. https://doi.org/10.1364/AO.32.002295
- Kazuo, M., "Historical Review and Future Trends of Scanning Optical Systems for Laser Beam Printers", Proc. of SPIE, Vol. 1987, pp. 264-273, 1993.
- Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, pp. 163-170, 2004.
- Wu, C.-H. and Chen, W.-S., "Injection molding and injection compression molding of three-beam grating of DVD pickup lens," Sensors and Actuators A, Vol. 125, pp. 367-375, 2006. https://doi.org/10.1016/j.sna.2005.07.025
- Suzuki, H., Kodera, S., Maekawa, S., Morita, N., Sakurai, E., Tanaka, K., & Syoji, K., "Study on Precision Grinding of Micro Aspherical Surface," Journal of the Japan Society for Precision Engineering, Vol. 64, No. 4, pp. 619-623, 1998. https://doi.org/10.2493/jjspe.64.619
- Itoh, S., "Study on Measurement of Axi-Symmetrical Form Generated by Ultra-Precision Machining(3rd Report)", Journal of the Japan Society for Precision Engineering, Vol. 61, No. 3, pp. 391-395, 1995. https://doi.org/10.2493/jjspe.61.391
- Lee, J. S. and Syoji, K., "A study on ultra precision machining for aspherical surface of optical parts," Journal of the KSPE, Vol. 19, No. 10, pp. 195-201. 2002.
- Takanori, H., Takesuke, M., Hisao, I., Masaharu, D. and Yoshio, A., "Laser Scanning Optical System with Plastics Lenses Featuring High Resolution," Proc. of SPIE, Vol. 1670, pp. 404-415, 1992.
- Yi, A. Y., & Jain, A., "Compression molding of aspherical glass lenses-A combined experimental and numerical analysis", Journal of the American Ceramic Society, Vol. 88, pp. 579-586, 2005. https://doi.org/10.1111/j.1551-2916.2005.00137.x
- Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics," Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. https://doi.org/10.1364/AO.32.002295
- Lee, E. S. and Back, S. Y., "A Study on optimum grinding factors for aspheric convex surface micro-lens using design of experiments", International Journal of Machine tools & Manufacture, Vol. 47, No. 3-4, pp. 509-520, 2007. https://doi.org/10.1016/j.ijmachtools.2006.06.007