DOI QR코드

DOI QR Code

Development of Polycrystalline Diamond Tungsten Carbide Combination Circular Saw and Comparison of Tool Wear

PCD 초경 복합 원형 톱 개발과 공구마모 비교

  • Joo, Chang-Min (School of Mechanical Engineering, Gyeongsang National University) ;
  • Park, Yoon-Ok (Pyeong Chang Carbide Co.) ;
  • Kim, Su-Jin (School of Mechanical Engineering, Gyeongsang National University)
  • Received : 2021.07.12
  • Accepted : 2021.07.26
  • Published : 2021.09.30

Abstract

Tungsten carbide (WC) circular saws have been widely used to cut plywood. Recently, expensive polycrystalline diamond (PCD) were adopted to extend the tool life of circular saws. This study developed a PCD-WC combination circular saw and compared its performance with that of existing WC and PCD saws. Flank wear of WC saw blades and edge chipping of rectangular PCD was observed during the experiments. The PCD-WC saw replaced half of the chamfered teeth with PCD and applied tough WC for all rectangular teeth. In the experiments, edge chipping was not observed in rectangular WC teeth and the flank wear of chamfered teeth was decreased compared with that of conventional circular saws.

Keywords

Acknowledgement

이 논문은 2020년도 중소벤처기업부 생활혁신형 기술개발사업 연구비 지원에 의하여 연구되었음.

References

  1. Mote, C. D. and Szymani, R., "A review report on principal developments in thin circular saw vibration and control research," Holz als Roh-und Werkstoff, Vol. 35, No. 5, pp. 189-196, 1977. https://doi.org/10.1007/BF02610942
  2. Choi, Y. S., Kim, D. H. and Oh, J. H., "A Study on the Cutting Optimal Power Requirements of Fast Growing Trees by Circular Saw," Journal of Korean Society of Forest Science, Vol. 103, No. 3, pp. 402-407, 2014. https://doi.org/10.14578/jkfs.2014.103.3.402
  3. Fujimoto, K., Takano, T. and Okumura, S., "Difference in mass concentration of airborne dust during circular sawing of five wood-based materials," Journal of wood science, Vol. 57, No. 2, pp. 149-154, 2010. https://doi.org/10.1007/s10086-010-1145-y
  4. Sheikh-Ahmad, J. Y. and Bailey, J. A., "The wear characteristics of some cemented tungsten carbides in machining particleboard," Wear, Vol. 225, pp. 256-266, 1999. https://doi.org/10.1016/S0043-1648(98)00361-5
  5. Osenius, S., Korhonen, A. S. and Sulonen, M. S., "Performance of TiN-coated tools in wood cutting," Surface and Coatings Technology, Vol. 33, pp. 141-151, 1987. https://doi.org/10.1016/0257-8972(87)90184-8
  6. Heath, P. J., "Developments in applications of PCD tooling," Journal of Materials Processing Technology, Vol. 116, No. 1, pp. 31-38, 2001. https://doi.org/10.1016/S0924-0136(01)00837-8
  7. Philbin, P. and Gordon, S., "Characterisation of the wear behaviour of polycrystalline diamond (PCD) tools when machining wood-based composites," Journal of Materials Processing Technology, Vol. 162, pp. 665-672, 2005. https://doi.org/10.1016/j.jmatprotec.2005.02.085
  8. Lammer, A., "Mechanical properties of polycrystalline diamonds," Materials Science and Technology, Vol. 4, No. 11, pp. 949-955, 1988. https://doi.org/10.1179/026708388790329909
  9. Bouaouadja, N., Hamidouche, M., Osmani, H., and Fantozzi, G., "Fracture toughness of WC-Co cemented carbides at room temperature," Journal of materials science letters, Vol. 13, No. 1, pp. 17-19, 1994. https://doi.org/10.1007/BF02352907
  10. Heath, P. J., "Developments in applications of PCD tooling," Journal of Materials Processing Technology, Vol. 116, No. 1, pp. 31-38, 2001. https://doi.org/10.1016/S0924-0136(01)00837-8
  11. Tso, P. L. and Liu, Y. G., "Study on PCD machining," International Journal of machine tools and manufacture, Vol. 42, No. 3, pp. 331-334, 2002. https://doi.org/10.1016/S0890-6955(01)00131-6