Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Hexagonal Shape Characteristics according to the Change in Standoff Distance during Fine Particle Blasting

미세입자 분사가공 시 분사높이 변화에 따른 육각형 가공형상 특성

  • Received : 2021.07.08
  • Accepted : 2021.08.19
  • Published : 2021.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study examines the characteristics of spraying conditions based on the change in standoff distance during fine particle spraying while measuring the surface roughness, maximum depth, and maximum width of the sprayed surface. The processing shape of the sprayed surface is analyzed to understand the effects of injection pressure, nozzle diameter, standoff distance, processing shape, processing cycle, processing speed, and injection particles, which are the main factors of fine particle injection processing. Based on the derived characteristics, we attempt to determine the interrelationships of these major factors. The standoff distance is set as a variable factor and a spray machining experiment using a hexagonal shape (from among polygons) instead of square and circular shapes is conducted. Results reveal that research on the characteristics of spraying conditions could be expanded based on changes in the shapes of workpieces.

Keywords

References

  1. Hwang, C.-W., Lee, S.-H., Wang, D. H., "A Study on the Development of a 2-axis Stage with Sequence Control for Micro Particle Blast Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 8, pp. 81~87, 2020. https://doi.org/10.14775/ksmpe.2020.19.08.081
  2. Hwang, C.-W., Lee, S.-H., Wang, D. H., "Selection of Main Factors by Experimental Analysis for Profile Blast Machining Based on Microparticle Blasting Equipment with a Two-Axis Sequence Control Stage", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 11, pp. 64~69, 2020. https://doi.org/10.14775/ksmpe.2020.19.11.069
  3. Choi, S.-Y., Hwang, C.-U., Kwon, D.-G., "Analysis of Machined Surface Morphology According to Changes of Surface Condition in Micro Particle Blasting", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 5, pp.70~75, 2018.
  4. Kim, S. H., Wang, D. H. and Lee, S. H., "The Characteristics of Surface Roughness when Micro Blasting of Titanium Alloy with Spiral Movement", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No, 4, pp.125-130, 2012.
  5. Kwon, D. G., Wang, D. H., "Optimal Blasting Conditions for Surface Profile when Micro Particle Blasting by Statistical Analysis of Orthogonal Arrays", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 148-154, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.148