DOI QR코드

DOI QR Code

Elimination of moving vehicles effects on modal identification of beam type bridges

  • He, Wen-Yu (Department of Civil Engineering, Hefei University of Technology) ;
  • Ding, Xu-Cong (Department of Civil Engineering, Hefei University of Technology) ;
  • Ren, Wei-Xin (College of Civil and Transportation Engineering, Shenzhen University) ;
  • Jing, Yue-Ling (Department of Civil Engineering, Hefei University of Technology)
  • Received : 2020.09.21
  • Accepted : 2021.03.19
  • Published : 2021.09.25

Abstract

The modal parameters identified under operation conditions are normally employed for bridge damage detection. However, the moving vehicles are usually deemed as part of the operation conditions without considering their mass property. Thus, the identified modal parameters belong to the vehicle-bridge system rather than the bridge itself, which would affect the effectiveness of subsequent damage detection. In this paper, the effects of moving vehicles on the identified frequencies and mode shapes under operation conditions are investigated via finite element model. The necessary of considering the moving vehicle effects is demonstrated by comparing the modal parameters variations induced by the moving vehicle and bridge damage. Then the empirical formulas to eliminate the moving vehicle effects considering the vehicle mass, velocity, bridge span and relative position are established by using the orthogonal test and least square method. Finally, examples are conducted to verify of the effectiveness of the proposed empirical formulas.

Keywords

Acknowledgement

The paper is supported by the National Natural Science Foundation of China (No. 51878234 and 51778204), Fundamental Research Funds for the Central Universities (No. JZ2019HGPA0101), Shenzhen Science and Technology Program (No. KQTD20180412181337494), and the Key Research and Development Project of Anhui Province (No. 1804a0802204).

References

  1. Askegaard, V. and Mossing, P. (1988), "Long term observation of RC-bridge using changes in natural frequency", Publication of Nordic Concrete Federation.
  2. Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: a review", Struct. Helth Monitor., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  3. Chang, K.C., Kim, C.W. and Borjigin, S. (2014), "Variability in bridge frequency induced by a parked vehicle", Smart Struct. Syst., Int. J., 13(5), 755-773. https://doi.org/10.12989/sss.2014.13.5.755
  4. Chen, G.W., Chen, X. and Omenzetter, P. (2020), "Modal parameter identification of a multiple-span post-tensioned concrete bridge using hybrid vibration testing data", Eng. Struct., 219, 110953. https://doi.org/10.1016/j.engstruct.2020.110953
  5. Daniel, C. and Anders, R. (2017), "Numerical evaluation of modal properties change of railway bridges during train passage", Proc. Eng., 199, 2931-2936. https://doi.org/10.1016/j.proeng.2017.09.345
  6. Daniel, C. and Obrien, E.J. (2013), "The non-stationarity of apparent bridge natural frequencies during vehicle crossing events", FME Trans., 41(4), 279-284.
  7. Daniel, C., David, H. and James, B. (2017), "Evolution of bridge frequencies and modes of vibration during truck passage", Eng. Struct., 152, 452-464. https://doi.org/10.1016/j.engstruct.2017.09.039
  8. Fan, W. and Qiao, P.Z. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Health Monitor., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  9. Farrar, C., Doebling, S.W., Cornwell, P. and Bridge C. (1997), Variability of modal parameters measured on the Alamosa Canyon Bridge, (No. LA-UR-96-3953; CONF-970233-7). Los Alamos National Lab., NM, USA.
  10. Feng, X., Gang, S.C., Hulsey, G.S. and Zatar, W. (2017), "Characterization of non-stationary properties of vehicle-bridge response for structural health monitoring", Adv. Mech. Eng., 9(5), 1-6. https://doi.org/10.1177/1687814017699141
  11. Haidarpour, A. and Tee, K.F. (2020), "Finite element model updating for structural health monitoring", Struct. Dura. Health Monitor., 14(1), 1-17. https://doi.org/10.32604/sdhm.2020.08792
  12. He, W.Y. and Ren, W.X. (2018), "Structural damage detection using a parked vehicle induced frequency variation", Eng. Struct., 170, 34-41. https://doi.org/10.1016/j.engstruct.2018.05.082
  13. He, W.Y., Ren, W.X. and Zuo, X.H. (2018), "Mass normalized mode shape identification method for bridge structures using parking vehicle induced frequency change", Struct. Control Hlth. Monit. 25, e2174. https://doi.org/10.1002/stc.2174
  14. Kim, C.Y., Jung, D.S., Kim, N.S., Kwon, S.D. and Feng, M.Q. (2003), "Effect of vehicle weight on natural frequencies of bridges measured from traffic-induced vibration", Earthq. Eng. Eng. Vib. 2(1), 109-115. https://doi.org/10.1007/BF02857543
  15. Ladislav, F. and Thomas, T. (1996), Dynamics of Railway Bridges.
  16. Li, J.Z., Su, M.B. and Fan, L.C. (2003), "Natural frequency of railway girder bridges under vehicle loads", J. Bridge Eng. ASCE, 8(4), 199-203. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:4(199)
  17. Li, H., Li, S., Ou, J. and Li, H. (2010), "Modal identification of bridges under varying environmental conditions: Temperature and wind effects", Struct. Control Health Monitor., 17(5), 495-512. https://doi.org/10.1002/stc.319
  18. Li, D., Ren, W.X. Hu, Y.D. and Yang, D. (2016), "Operational modal analysis of structures by stochastic subspace identification with a delay index", Struct. Eng. Mech., Int. J., 59(1), 187-207. https://doi.org/10.12989/sem.2016.59.1.187
  19. Liu, H., Wang, H., Tan, G. and Wang, W. (2018), "Effect of temperature and spring-mass systems on modal properties of Timoshenko concrete beam", Struct. Eng. Mech., Int. J., 65(4), 389-400. https://doi.org/10.12989/sem.2018.65.4.389
  20. Lu, Z.R. and Liu, J.K. (2011), "Identification of both structural damages in bridge deck and vehicular parameters using measured dynamic responses", Comput. Struct., 89, 1397-1405. https://doi.org/10.1016/j.compstruc.2011.03.008
  21. Peeters, B. and Roeck, G.D. (1999), "Reference-based stochastic subspace identification for output-only modal analysis", Mech. Syst. Sig. Process., 13(6), 855-878. https://doi.org/10.1006/mssp.1999.1249
  22. Ren, W.X. and Roeck, G.D. (2002), "Structural damage identification using modal data. I: simulation verification", J. Struct. Eng. ASCE, 128(1), 87-95. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(87)
  23. Ren, J.Y., Li, W.P. and Su, M.B. (2011), "Vertical load-carrying natural frequency of railway double-track pre-stressed concrete continuous bridge", J. Rail. Eng. Soc., 255-260(3), 797-800. https://doi.org/10.4028/www.scientific.net/AMR.255-260.797
  24. Shimpi, V., Sivasubramanian, M.V.R. and Singh, S.B. (2019), "System identification of heritage structures through AVT and OMA: a review", Struct. Dura. Health Monit., 13(1), 1-40. https://doi.org/10.32604/sdhm.2019.05951
  25. Spiridonakos, M.D. and Fassois, S.D. (2009), "Parametric identification of time-varying structure based on vector vibration response measurements", Mech. Syst. Sig. Process., 23(6), 2029-2048. https://doi.org/10.1016/j.ymssp.2008.11.004
  26. Xiao, F., Chen, G.S., Hulsey, J.L. and Zatar, W. (2017), "Characterization of non-stationary properties of vehicle-bridge response for structural health monitoring", Adv. Mech. Eng., 9(5), 1-6. https://doi.org/10.1177/1687814017699141
  27. Yang, Y.B., Cheng, M.C. and Chang, K.C. (2013), "Frequency variation in vehicle-bridge interaction systems", Int. J. Struct. Stab. Dyn., 13(2), 1-22. https://doi.org/10.1142/S0219455413500193
  28. Yang, X.M., Yi, T.H., Qu, C.X., Li, H.N. and Liu, H. (2020), "Continuous tracking of bridge modal parameters based on subspace correlations", Struct. Control Health Monitor., 27(10), e2615. https://doi.org/10.1002/stc.2615