한국안전학회지 (Journal of the Korean Society of Safety)

  • 제36권4호
  • /
  • Pages.29-36
  • /
  • 2021
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

재사용 시스템비계와 시스템동바리 수직재의 허용강도 분석

Analysis of Allowable Strength of Reused Vertical Members of System Scaffolds and System Supports

  • Park, Jin-Suk (HSE Management Team, DAEWOO ENGINEERING & CONSTRUCTION) ;
  • Ko, Sang Seom (Department of Safety Engineering, Chungbuk National University) ;
  • Won, Jeong-Hun (Department of Safety Engineering / Department of Disaster Prevention Engineering & Department of Big Data, Chungbuk National University)
  • 투고 : 2021.01.22
  • 심사 : 2021.08.02
  • 발행 : 2021.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The allowable strength based on experiments and the design allowable strength calculated using the design criteria were compared, which suggested a ratio between the allowable strengths for the reused vertical members of the system scaffolding and system support. By investigating a total of 421 certification reports for reused vertical members, the experimental allowable strengths were collected. Using design criteria such as the road bridge design and KDS 14 30 10, the design allowable strengths were calculated for various slenderness ratios. For the system scaffolding, the average ratio between the experimental and design allowable strengths was calculated to be 0.880 by assuming a normal distribution for all specimens. However, by analyzing the strength ratio according to the slenderness ratio, the lowest average strength ratio was found to be at least 0.844. Therefore, it is reasonable to assume that the allowable strength of the reused vertical members was 80-84% of the design allowable strength. In addition, assuming the allowable strength to be 85% of the design allowable strength is a possible method for reused vertical members of system supports.

키워드

과제정보

This paper was partially supported by Ministry of the Interior and Safety as "Human resource development Project in Disaster management".

참고문헌

  1. D. W. Kim, J. H. Won, Y. K. Park and S. J. Lim, "A Study on the Improvement of Safety Certification Marks Displayed on the surface of Temporary Equipments at Construction Site (I) : Stakeholder Cognition Analysis and Marking Contents", J. Korean Soc. Saf., Vol. 32, No. 4, pp. 59-65, 2017. https://doi.org/10.14346/JKOSOS.2017.32.4.59
  2. S. C. Jeong and H. K Lee, "A Study on the Survey and Improvement of Safety Certifications in Temporary Equipment and Material", Journal of the Regional Association of Architectural Institute of Korea, Vol. 18, No. 2, pp. 171-180, 2016.
  3. S. C. Jeong and H. K Lee, "A Study on the Comparative Analysis of the Quality Management System of Temporary Equipment and Materials", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 32, No. 9, pp. 43-50, 2016. https://doi.org/10.5659/JAIK_SC.2016.32.9.43
  4. The Board of Audit and Inspection of Korea, "Audit Reports Actual Condition of Quality Control for Construction Materials -", 2016.
  5. B. H. Oh and B. J. Choi, "A Study on Improvement of Safety & Quality Management Standard Based on Compression Tests of Steel Pipe Supports", J. Korean Soc. Saf., Vol. 33, No. 2, pp. 94-103, 2018. https://doi.org/10.14346/JKOSOS.2018.33.2.94
  6. J. W. Jeong and Y. G. Kim, "A Study on the Analysis of Current Situation and the Deduction of Improvement Measure Regarding the Scaffolding and the Related Components at Construction Site", J. Korean Soc. Saf., Vol. 34, No. 5, pp. 63-71, 2019.
  7. S. W. Paik and M. L. Ro, "A Study on the Strength Change of Used Pipe Support(I)", J. Korean Soc. Saf., Vol. 19, No. 2, pp. 93-97, 2004.
  8. S. W. Paik and M. L. Ro, "A Study on the Strength Change of Used Pipe Support(II)", J. Korean Soc. Saf., Vol. 20, No. 3, pp. 120-125, 2005.
  9. J. K. Park and M. K. Choi, "A Study on Quality Management Improvement of Used Pipe Support(V2)", J. Korean Soc. Saf., Vol. 34, No. 3, pp. 36-41, 2019. https://doi.org/10.14346/JKOSOS.2019.34.3.36
  10. M. K. Choi and J. K. Park, "A Experimental Study on Performance Improvement Factors of Used V4 Steel Pipe Support", J. Korean Soc. Saf., Vol. 35, No. 3, pp. 43-48, 2020. https://doi.org/10.14346/JKOSOS.2020.35.3.43
  11. Ministry of Land, Transport and Maritime Affairs, Road Bridge Design Criteria, Korea Road Traffic Association, 2010.
  12. Korea Construction Standard Center, KDS 14 30 10 : 2019.