과제정보
본 논문은 국토교통부/국토교통과학기술진흥원의 지원으로 수행(과제번호 21CTAP-C157949-02)된 것이며, 한국수력원자력(주)에서 재원을 부담하여 성균관대에서 수행한 연구 결과입니다(제 2020-기술-08호).
참고문헌
- M. Jacklein, A. Pfaff, and K. Hoschke, "Developing Tungsten-Filled Metal Matrix Composite Materials Using Laser Powder Bed Fusion," Applied Sciences, Vol. 10, No. 24, 2020, 8869. https://doi.org/10.3390/app10248869
- D.E. Cooper, N. Blundell, S. Maggs, and G.J. Gibbons, "Additive Layer Manufacture of Inconel 625 Metal Matrix Composites, Reinforcement Material Evaluation," Journal of Materials Processing Technology, Vol. 213, No. 12, 2013, pp. 2191-2200. https://doi.org/10.1016/j.jmatprotec.2013.06.021
- W. Zhou, X. Sun, K. Kikuchi, N. Nomura, K. Yoshimi, and A. Kawasaki, "In situ Synthesized TiC/Mo-based Composites via Laser Powder Bed Fusion," Materials & Design, Vol. 146, 2018, pp. 116-124. https://doi.org/10.1016/j.matdes.2018.03.001
- S.K. Ghosh, P. Saha, and S. Kishore, "Influence of Size and Volume Fraction of SiC Particulates on Properties of ex situ Reinforced Al-4.5Cu-3Mg Metal Matrix Composite Prepared by Direct Metal Laser Sintering Process," Materials Science and Engineering: A, Vol. 527, No. 18-19, 2010, pp. 4694-4701. https://doi.org/10.1016/j.msea.2010.03.108
- J.K. Tiwari, A. Mandal, N. Sathish, A.K. Agrawal, and A.K. Srivastava, "Investigation of Porosity, Microstructure and Mechanical Properties of Additively Manufactured Graphene Reinforced AlSi10Mg Composite," Additive Manufacturing, Vol. 33, 2020, 101095. https://doi.org/10.1016/j.addma.2020.101095
- G. Welsch, R. Boyer, and E. Collings, "Materials Properties Handbook: Titanium Alloys," ASM International, 1993.
- S. Singerman, J. Jackson, and M. Lynn, "Titanium Metal Matrix Composites for Aerospace Applications, Superalloys 1996," Proceedings of Eighth International Symposium on Superalloys, 1996.
- B.K. Anil Kumar, M.G. Ananthaprasad, and K. GopalaKrishna, "A Review on Mechanical and Tribological Behaviors of Nickel Matrix Composites," Indian Journal of Science and Technology, Vol. 9, No. 2, 2016, pp. 1-7.
- L.-C. Zhang and H. Attar, "Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review," Advanced Engineering Materials, Vol. 18, No. 4, 2016, pp. 463-475. https://doi.org/10.1002/adem.201500419
- A. Hanson, J. Runkle, R. Widmer, and J. Hebeissen, "Titanium Near Net Shapes from Elemental Powder Blends," International Journal of Powder Metallurgy (1986), Vol. 26, No. 2, 1990, pp. 157-164.
- Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu, and B.Y. Huang, "Design of Powder Metallurgy Titanium Alloys and Composites," Materials Science and Engineering: A, Vol. 418, No. 1-2, 2006, pp. 25-35. https://doi.org/10.1016/j.msea.2005.10.057
- F. Froes, "The Titanium Image: Facing the Realities of Life," JOM, Vol. 52, No. 5, 2000, p.12. https://doi.org/10.1007/s11837-000-0023-2
- D. Eylon and F. Froes, "Titanium Net-shape Technologies," JOM, Vol. 36, No. 6, 1984, pp. 36-41. https://doi.org/10.1007/BF03338470
- F. Nturanabo, L. Masu, and J. B. Kirabira, "Novel Applications of Aluminium Metal Matrix Composites," doi: 10.5772/intechopen.86225, 2019.
- M. Surappa, "Aluminium Matrix Composites: Challenges and Opportunities," Sadhana, Vol. 28, No. 1-2, 2003, pp. 319-334. https://doi.org/10.1007/BF02717141
- J. Hashim, L. Looney, and M. Hashmi, "Particle Distribution in Cast Metal Matrix Composites-Part I," Journal of Materials Processing Technology, Vol. 123, No. 2, 2002, pp. 251-257. https://doi.org/10.1016/S0924-0136(02)00098-5
- A. Sanaty-Zadeh, "Comparison between Current Models for the Strength of Particulate-reinforced Metal Matrix Nanocomposites with Emphasis on Consideration of Hall-Petch Effect," Materials Science and Engineering: A, Vol. 531, 2012, pp. 112-118. https://doi.org/10.1016/j.msea.2011.10.043
- C. Goh, J. Wei, L. Lee, and M. Gupta, "Properties and Deformation Behaviour of Mg-Y2O3 Nanocomposites," Acta Materialia, Vol. 55, No. 15, 2007, pp. 5115-5121. https://doi.org/10.1016/j.actamat.2007.05.032
- B. AlMangour, D. Grzesiak, and J.-M. Yang, "Rapid Fabrication of Bulk-form TiB2/316L Stainless Steel Nanocomposites with Novel Reinforcement Architecture and Improved Performance by Selective Laser Melting," Journal of Alloys and Compounds, Vol. 680, 2016, pp. 480-493. https://doi.org/10.1016/j.jallcom.2016.04.156
- S.T. Mavhungu, E.T. Akinlabi, M.A. Onitiri, and F.M. Varachia, "Aluminum Matrix Composites for Industrial Use: Advances and Trends," Procedia Manufacturing, Vol. 7, 2017, pp. 178-182. https://doi.org/10.1016/j.promfg.2016.12.045
- W.H. Yu, S.L. Sing, C.K. Chua, C.N. Kuo, and X.L. Tian, "Particle-reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review," Progress in Materials Science, Vol. 104, 2019, pp. 330-379. https://doi.org/10.1016/j.pmatsci.2019.04.006
- R. Li, J. Liu, Y. Shi, L. Wang, and W. Jiang, "Balling Behavior of Stainless Steel and Nickel Powder During Selective Laser Melting Process," The International Journal of Advanced Manufacturing Technology, Vol. 59, No. 9-12, 2011, pp. 1025-1035. https://doi.org/10.1007/s00170-011-3566-1
- S. Rahmati and E. Vahabli, "Evaluation of Analytical Modeling for Improvement of Surface Roughness of FDM Test Part Using Measurement Results," The International Journal of Advanced Manufacturing Technology, Vol. 79, No. 5-8, 2015, pp. 823-829. https://doi.org/10.1007/s00170-015-6879-7
- H. Niu and I. H. Chang, "Instability of Scan Tracks of Selective Laser Sintering of High Speed Steel Powder," Scripta Materialia, Vol. 41, No. 11, 1999, pp. 1229-1234. https://doi.org/10.1016/S1359-6462(99)00276-6
- D. Gu and Y. Shen, "Balling Phenomena in Direct Laser Sintering of Stainless Steel Powder: Metallurgical mechanisms and control methods," Materials & Design, Vol. 30, No. 8, 2009, pp. 2903-2910. https://doi.org/10.1016/j.matdes.2009.01.013
- T. Mukherjee, W. Zhang, and T. DebRoy, "An Improved Prediction of Residual Stresses and Distortion in Additive Manufacturing," Computational Materials Science, Vol. 126, 2017, pp. 360-372. https://doi.org/10.1016/j.commatsci.2016.10.003
- S. Dadbakhsh, R. Mertens, L. Hao, J. Van Humbeeck, and J. P. Kruth, "Selective Laser Melting to Manufacture "In Situ" Metal Matrix Composites: A Review," Advanced Engineering Materials, Vol. 21, No. 3, 2019, 1801244. https://doi.org/10.1002/adem.201801244
- A. Pramanik, Problems and Solutions in Machining of Titanium Alloys," The International Journal of Advanced Manufacturing Technology, Vol. 70, No. 5-8, 2013, pp. 919-928. https://doi.org/10.1007/s00170-013-5326-x
- T. DebRoy, T. Mukherjee, J.O. Milewski, J.W. Elmer, B. Ribic, J.J. Blecher, and W. Zhang, "Scientific, Technological and Economic Issues in Metal Printing and Their Solutions," Nat Mater, Vol. 18, No. 10, 2019, pp. 1026-1032. https://doi.org/10.1038/s41563-019-0408-2
- S. Amirkhanlou and S. Ji, "A Review on High Stiffness Aluminum-based Composites and Bimetallics," Critical Reviews in Solid State and Materials Sciences, Vol. 45, No. 1, 2020, pp. 1-21. https://doi.org/10.1080/10408436.2018.1485550
- T.S. Srivatsan, I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia, "Processing Techniques for Particulate-reinforced Metal Aluminium Matrix Composites," Journal of Materials Science, Vol. 26, No. 22, 1991, pp. 5965-5978. https://doi.org/10.1007/BF01113872
- P.B. Prangnell, T. Downes, W. Stobbs, and P. Withers, "The Deformation of Discontinuously Reinforced MMCs-I. The Initial Yielding Behaviour," Acta Metallurgica et Materialia, Vol. 42, No. 10, 1994, pp. 3425-3436. https://doi.org/10.1016/0956-7151(94)90475-8
- J. Wegner, A. Fehr, S. Platt, S. Kleszczynski, G. Witt, and W. Tillmann, "Diamond-Impregnated 316L Metal Matrix Composites Fabricated by Powder Bed Fusion with Laser Beam - Influences of the Energy Input on the Microstructural Properties," Diamond and Related Materials, Vol. 109, 2020, 108040. https://doi.org/10.1016/j.diamond.2020.108040
- C. Feng and L. Froyen, "Microstructures of in situ Al/TiB2 MMCs Prepared by a Casting Route," Journal of Materials Science, Vol. 35, No. 4, 2000, pp. 837-850. https://doi.org/10.1023/A:1004729920354
- C. Hu, L. Barnard, S. Mridha, and T. Baker, "The Role of SiC Particulate and Al2O3 (Saffil) Fibers in Several Alloys during the Formation of in situ MMCs Developed by Laser Processing," Journal of Materials Processing Technology, Vol. 58, No. 1, 1996, pp. 87-95. https://doi.org/10.1016/0924-0136(95)02111-6
- J. Peng, W. Li, F. Huang, J. Tian, G. Liu, and J. Du, "Microstructure Evolution of Rare Earth Pr Modified Alumina-silicate Short Fiber-reinforced Al-Si Metal Matrix Composites," Rare Metals, Vol. 28, No. 2, 2009, pp. 164-168. https://doi.org/10.1007/s12598-009-0033-3
- A. Nieto, A. Bisht, D. Lahiri, C. Zhang, and A. Agarwal, "Graphene Reinforced Metal and Ceramic Matrix Composites: A Review," International Materials Reviews, Vol. 62, No. 5, 2016, pp. 241-302. https://doi.org/10.1080/09506608.2016.1219481
- F. Chen, N. Gupta, R.K. Behera, and P.K. Rohatgi, "Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties," JOM, Vol. 70, No. 6, 2018, pp. 837-845. https://doi.org/10.1007/s11837-018-2810-7
- T. Rajan, R. Pillai, and B. Pai, "Reinforcement Coatings and Interfaces in Aluminium Metal Matrix Composites," Journal of Materials Science, Vol. 33, No. 14, 1998, pp. 3491-3503. https://doi.org/10.1023/A:1004674822751
- F. Deirmina, B. AlMangour, D. Grzesiak, and M. Pellizzari, "H13-partially Stabilized Zirconia Nanocomposites Fabricated by High-energy Mechanical Milling and Selective Laser Melting," Materials & Design, Vol. 146, 2018, pp. 286-297. https://doi.org/10.1016/j.matdes.2018.03.017
- D. Miracle, "Metal Matrix Composites - From Science to Technological Significance," Composites Science and Technology, Vol. 65, No. 15-16, 2005, pp. 2526-2540. https://doi.org/10.1016/j.compscitech.2005.05.027
- A. Paknia, A. Pramanik, A.R. Dixit, and S. Chattopadhyaya, "Effect of Size, Content and Shape of Reinforcements on the Behavior of Metal Matrix Composites (MMCs) Under Tension," Journal of Materials Engineering and Performance, Vol. 25, No. 10, 2016, pp. 4444-4459. https://doi.org/10.1007/s11665-016-2307-x
- X. Gao, X. Zhang, M. Qian, and L. Geng, "Effect of Reinforcement Shape on Fracture Behaviour of SiC/Al Composites with Network Architecture," Composite Structures, Vol. 215, 2019, pp. 411-420. https://doi.org/10.1016/j.compstruct.2019.02.067
- A. Whitehouse, H. Winand, and T. Clyne, "The Effect of Processing Route and Reinforcement Geometry on Isothermal Creep Behaviour of Particulate and Short Fibre MMCs," Materials Science and Engineering: A, Vol. 242, No. 1-2, 1998, pp. 57-69. https://doi.org/10.1016/S0921-5093(97)00524-8
- Z. Zhang and H. M. Urbassek, "Dislocation-based Strengthening Mechanisms in Metal-matrix Nanocomposites: A Molecular Dynamics Study of the Influence of Reinforcement Shape in the Al-Si System," Computational Materials Science, Vol. 145, 2018, pp. 109-115. https://doi.org/10.1016/j.commatsci.2017.12.063
- M. Xia, A. Liu, Z. Hou, N. Li, Z. Chen, and H. Ding, "Microstructure Growth Behavior and Its Evolution Mechanism During Laser Additive Manufacture of In-situ Reinforced (TiB+TiC)/Ti Composite," Journal of Alloys and Compounds, Vol. 728, 2017, pp. 436-444. https://doi.org/10.1016/j.jallcom.2017.09.033
- Y. Zhang, J. Sun, and R. Vilar, "Characterization of (TiB+TiC)/TC4 in situ Titanium Matrix Composites Prepared by Laser Direct Deposition," Journal of Materials Processing Technology, Vol. 211, No. 4, 2011, pp. 597-601. https://doi.org/10.1016/j.jmatprotec.2010.11.009
- C. Cai, B. Song, C. Qiu, L. Li, P. Xue, Q. Wei, J. Zhou, H. Nan, H. Chen, and Y. Shi, "Hot Isostatic Pressing of in-situ TiB/Ti-6Al-4V Composites with Novel Reinforcement Architecture, Enhanced Hardness and Elevated Tribological Properties," Journal of Alloys and Compounds, Vol. 710, 2017, pp. 364-374. https://doi.org/10.1016/j.jallcom.2017.03.160
- H.J. Niu and I.T.H. Chang, "Selective Laser Sintering of Gas and Water Atomized High Speed Steel Powders," Scripta Materialia, Vol. 41, No. 1, 1999, pp. 25-30. https://doi.org/10.1016/S1359-6462(99)00089-5
- C. Suryanarayana, "Mechanical Alloying and Milling," Progress in Materials Science, Vol. 46, 2001, pp. 1-184. https://doi.org/10.1016/S0079-6425(99)00010-9
- H. Attar, M. Bonisch, M. Calin, L.-C. Zhang, S. Scudino, and J. Eckert, "Selective Laser Melting of in situ Titanium-titanium Boride Composites: Processing, Microstructure and Mechanical Properties," Acta Materialia, Vol. 76, 2014, pp. 13-22. https://doi.org/10.1016/j.actamat.2014.05.022
- G. Xue, L. Ke, H. Liao, C. Chen, and H. Zhu, "Effect of SiC Particle Size on Densification Behavior and Mechanical Properties of SiCp/AlSi10Mg Composites Fabricated by Laser Powder Bed Fusion," Journal of Alloys and Compounds, Vol. 845, 2020, 156260. https://doi.org/10.1016/j.jallcom.2020.156260
- S.A. Farzadfar, M.J. Murtagh, and N. Venugopal, "Impact of IN718 Bimodal Powder Size Distribution on the Performance and Productivity of Laser Powder Bed Fusion Additive Manufacturing Process," Powder Technology, Vol. 375, 2020, pp. 60-80. https://doi.org/10.1016/j.powtec.2020.07.092
- J.A. Muniz-Lerma, A. Nommeots-Nomm, K.E. Waters, and M. Brochu, "A Comprehensive Approach to Powder Feedstock Characterization for Powder Bed Fusion Additive Manufacturing: A Case Study on AlSi7Mg," Materials (Basel), Vol. 11, No. 12, 2018, 2386. https://doi.org/10.3390/ma11122386
- F. Chang, D. Gu, D. Dai, and P. Yuan, "Selective Laser Melting of in-situ Al4SiC4+SiC Hybrid Reinforced Al Matrix Composites: Influence of Starting SiC Particle Size," Surface and Coatings Technology, Vol. 272, 2015, pp. 15-24. https://doi.org/10.1016/j.surfcoat.2015.04.029
- R.F. Gibson, "Principles of Composite Material Mechanics," CRC Press, 2016.
- A. Mussatto, I.U.I. Ahad, R.T. Mousavian, Y. Delaure, and D. Brabazon, "Advanced Production Routes for Metal Matrix Composites," Engineering Reports, Vol. 3, No. 5, 2020, e12330.
- J.L. York Duran, C. Kuhn, and R. Muller, "Modeling of the Effective Properties of Metal Matrix Composites Using Computational Homogenization," Applied Mechanics and Materials, Vol. 869, 2017, pp. 94-111. https://doi.org/10.4028/www.scientific.net/AMM.869.94
- Z.d. M. Boari, W.A. Monteiro, and C.A.d.J. Miranda, "Mathematical Model Predicts the Elastic Behavior of Composite Materials," Materials Research, Vol. 8, No. 1, 2005, pp. 99-103. https://doi.org/10.1590/S1516-14392005000100017
- J. Shi and Y. Wang, "Development of Metal Matrix Composites by Laser-assisted Additive Manufacturing Technologies: a Review," Journal of Materials Science, Vol. 55, No. 23, 2020, pp. 9883-9917. https://doi.org/10.1007/s10853-020-04730-3
- B. AlMangour, D. Grzesiak, and M. Jenn, "Selective Laser Melting of TiC Reinforced 316L Stainless Steel Matrix Nanocomposites: Influence of Starting TiC Particle Size and Volume Content," Materials & Design, Vol. 104, 2016, pp. 141-151. https://doi.org/10.1016/j.matdes.2016.05.018
- C. Gao, W. Wu, J. Shi, Z. Xiao, and A.H. Akbarzadeh, "Simultaneous Enhancement of Strength, Ductility, and Hardness of TiN/AlSi10Mg Nanocomposites via Selective Laser Melting," Additive Manufacturing, Vol. 34, 2020, 101378. https://doi.org/10.1016/j.addma.2020.101378
- Y. Wang, J. Shi, S. Lu, and Y. Wang, "Selective Laser Melting of Graphene-Reinforced Inconel 718 Superalloy: Evaluation of Microstructure and Tensile Performance," Journal of Manufacturing Science and Engineering, Vol. 139, No. 4, 2017, 041005. https://doi.org/10.1115/1.4034712
- X. Yao, S.K. Moon, B.Y. Lee, and G. Bi, "Effects of Heat Treatment on Microstructures and Tensile Properties of IN718/TiC Nanocomposite Fabricated by Selective Laser Melting," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 12, 2017, pp. 1693-1701. https://doi.org/10.1007/s12541-017-0197-y
- A. Mandal, J.K. Tiwari, B. AlMangour, A. Das, N. Sathish, R.K. Sharma, P. Rajput, and A.K. Srivastava, "Microstructural and Thermal Expansion Behaviour of Graphene Reinforced 316L Stainless Steel Matrix Composite Prepared via Powder Bed Fusion Additive Manufacturing," Results in Materials, Vol. 11, 2021, 100200. https://doi.org/10.1016/j.rinma.2021.100200
- E. Garlea, H. Choo, C.C. Sluss, M.R. Koehler, R.L. Bridges, X. Xiao, Y. Ren, and B.H. Jared, "Variation of Elastic Mechanical Properties with Texture, Porosity, and Defect Characteristics in Laser Powder Bed Fusion 316L Stainless Steel," Materials Science and Engineering: A, Vol. 763, 2019, 138032. https://doi.org/10.1016/j.msea.2019.138032
- H. Choo, K.-L. Sham, J. Bohling, A. Ngo, X. Xiao, Y. Ren, P.J. Depond, M.J. Matthews, and E. Garlea, "Effect of Laser Power on Defect, Texture, and Microstructure of a Laser Powder Bed Fusion Processed 316L Stainless Steel," Materials & Design, Vol. 164, 2019, 107534. https://doi.org/10.1016/j.matdes.2018.12.006
- T. Mukherjee and T. DebRoy, "Mitigation of Lack of Fusion Defects in Powder Bed Fusion Additive Manufacturing," Journal of Manufacturing Processes, Vol. 36, 2018, pp. 442-449. https://doi.org/10.1016/j.jmapro.2018.10.028
- F. Caiazzo, V. Alfieri, and G. Casalino, "On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion," Materials (Basel), Vol. 13, No. 3, 2020, 538. https://doi.org/10.3390/ma13030538
- Q. Guo, C. Zhao, M. Qu, L. Xiong, L.I. Escano, S.M.H. Hojjatzadeh, N.D. Parab, K. Fezzaa, W. Everhart, T. Sun, and L. Chen, "In-situ Characterization and Quantification of Melt Pool Variation under Constant Input Energy Density in Laser Powder Bed Fusion Additive Manufacturing Process," Additive Manufacturing, Vol. 28, 2019, pp. 600-609. https://doi.org/10.1016/j.addma.2019.04.021
- R. Cunningham, C. Zhao, N. Parab, C. Kantzos, J. Pauza, K. Fezzaa, T. Sun, and A.D. Rollett, "Keyhole Threshold and Morphology in Laser Melting Revealed by Ultrahigh-speed X-ray Imaging," Science, Vol. 363, No. 6429, 2019, pp. 849-852. https://doi.org/10.1126/science.aav4687
- M. Tang, P.C. Pistorius, and J.L. Beuth, "Prediction of Lack-of-fusion Porosity for Powder Bed Fusion," Additive Manufacturing, Vol. 14, 2017, pp. 39-48. https://doi.org/10.1016/j.addma.2016.12.001
- A. Kudzal, B. McWilliams, C. Hofmeister, F. Kellogg, J. Yu, J. Taggart-Scarff, and J. Liang, "Effect of Scan Pattern on the Microstructure and Mechanical Properties of Powder Bed Fusion Additive Manufactured 17-4 Stainless Steel," Materials & Design, Vol. 133, 2017, pp. 205-215. https://doi.org/10.1016/j.matdes.2017.07.047
- J.-P. Kruth, M. Badrossamay, E. Yasa, J. Deckers, L. Thijs, and J. Van Humbeeck, "Part and Material Properties in Selective Laser Melting of Metals," Proceedings of the 16th International Symposium on Electromachining (ISEM XVI), 2010, pp. 3-14.
- R. Mertens, S. Dadbakhsh, J. Van Humbeeck, and J.-P. Kruth, "Application of Base Plate Preheating during Selective Laser Melting," Procedia Cirp, Vol. 74, 2018, pp. 5-11. https://doi.org/10.1016/j.procir.2018.08.002
- B. Zhang, L. Dembinski, and C. Coddet, "The Study of the Laser Parameters and Environment Variables Effect on Mechanical Properties of High Compact Parts Elaborated by Selective Laser Melting 316L Powder," Materials Science and Engineering: A, Vol. 584, 2013, pp. 21-31. https://doi.org/10.1016/j.msea.2013.06.055
- B. Vrancken, L. Thijs, J. P. Kruth, and J. Van Humbeeck, "Microstructure and Mechanical Properties of a Novel β Titanium Metallic Composite by Selective Laser Melting," Acta Materialia, Vol. 68, 2014, pp. 150-158. https://doi.org/10.1016/j.actamat.2014.01.018
- B. Song, S. Dong, P. Coddet, G. Zhou, S. Ouyang, H. Liao, and C. Coddet, "Microstructure and Tensile Behavior of Hybrid Nano-micro SiC Reinforced Iron Matrix Composites Produced by Selective Laser Melting," Journal of Alloys and Compounds, Vol. 579, 2013, pp. 415-421. https://doi.org/10.1016/j.jallcom.2013.06.087
- S. Tang, R. Ummethala, C. Suryanarayana, J. Eckert, K.G. Prashanth, and Z. Wang, "Additive Manufacturing of Aluminum-Based Metal Matrix Composites-A Review," Advanced Engineering Materials, Vol. 23, No. 7, 2021, 2100053. https://doi.org/10.1002/adem.202100053
- M. Fattahi, A.R. Gholami, A. Eynalvandpour, E. Ahmadi, Y. Fattahi, and S. Akhavan, "Improved Microstructure and Mechanical Properties in Gas Tungsten Arc Welded Aluminum Joints by Using Graphene Nanosheets/aluminum Composite Filler Wires," Micron, Vol. 64, 2014, pp. 20-7. https://doi.org/10.1016/j.micron.2014.03.013
- W. Miller and F. Humphreys, "Strengthening Mechanisms in Particulate Metal Matrix Composites," Scripta metallurgica et materialia, Vol. 25, No. 1, 1991, pp. 33-38. https://doi.org/10.1016/0956-716X(91)90349-6
- V.V. Ganesh and N. Chawla, "Effect of Particle Orientation Anisotropy on the Tensile Behavior of Metal Matrix Composites: Experiments and Microstructure-based Simulation," Materials Science and Engineering: A, Vol. 391, No. 1-2, 2005, pp. 342-353. https://doi.org/10.1016/j.msea.2004.09.017
- B. Vrancken, S. Dadbakhsh, R. Mertens, K. Vanmeensel, J. Vleugels, S. Yang, and J.-P. Kruth, "Selective Laser Melting Process Optimization of Ti-Mo-TiC Metal Matrix Composites," CIRP Annals, Vol. 68, No. 1, 2019, pp. 221-224. https://doi.org/10.1016/j.cirp.2019.04.120
- D. Yoon, Y.W. Son, and H. Cheong, "Negative Thermal Expansion Coefficient of Graphene Measured by Raman Spectroscopy," Nano Lett., Vol. 11, No. 8, 2011, pp. 3227-3231. https://doi.org/10.1021/nl201488g
- P.K. Farayibi and T.E. Abioye, "Additive Manufacture of TiB2/Ti-6Al-4V Metal Matrix Composite by Selective Laser Melting," Int. J. Rapid Manufacturing, Vol. 8, No. 3, 2019.
- X.P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H. W. Wang, J. Vleugels, J. Van Humbeeck, and J.P. Kruth," Selective Laser Melting of Nano-TiB2 Decorated AlSi10Mg Alloy with High Fracture Strength and Ductility," Acta Materialia, Vol. 129, 2017, pp. 183-193. https://doi.org/10.1016/j.actamat.2017.02.062
- D. Gu, H. Wang, D. Dai, P. Yuan, W. Meiners, and R. Poprawe, "Rapid Fabrication of Al-based Bulk-form Nanocomposites with Novel Reinforcement and Enhanced Performance by Selective Laser Melting," Scripta Materialia, Vol. 96, 2015, pp. 25-28. https://doi.org/10.1016/j.scriptamat.2014.10.011