참고문헌
- Campanella, R. G., Gillespie, D. and Robertson, P. K. (1982), Pore pressure during cone penetration testing, Proceeding of the 2nd European Symposium on penetration Testing, ESOPT-II, Amsterdam, 2, pp. 507~512.
- Chen, B. S. and Mayne, P. W. (1993), Piezocone evaluation of underained shear strength in clays, Proceedings of 11th Southeast Asian Geotechnical Conference, Singapore, pp. 91~98.
- Karlsrud, K., Lunne, T. and Brattlieu, K. (1996), Improved CPTU Correlations Based on Block Samples, Nordisk Geoteknikermote, Reykjavik.
- Kim, J. K. Sung, K. K. Kim, H. J. and Kim, Y. W. (2000), The application of piezocone penetration test at Inchon International Airport, Journal of Korean Geotechnical Society, Vol. 16, No. 2, pp. 115~123 (In Korean).
- Kjekstad, O., Lunne, T. and Clausen, C. J. F. (1978), Comparison Between insitu cone resisrance and laboratory strength for overconsolidated north sea clays, Marine Geotechnology, Vol. 3, No. 4.
- Lee, S. J. (1997), Estimations of geotechnical properties from piezocone penetration tests in south Korea, Ph.D Thesis, Seoul National University (In Korean).
- Lunne, T., Eide, O. and De Ruiter, J. (1976), Correlation between cone resistance and vane shear strength in some Scandinavian soft to medium stiff clays, Canadian Geotechnical Journal, Vol. 13, pp. 430~441. https://doi.org/10.1139/t76-043
- Lunne, T. and Kleven, A. (1981), Role OF CPT in north sea foundation engineering, Session at the ASCE National Convention Cone Penetration Testing and Materials, ASCE, St.Louis, pp. 76~107.
- Lunne, T., Robertson, P. K. and Powell, J. J. M. (1997), Cone Penetration Testing, E&FN SPON, London, UK.
- Robertson, P. K., Campanella, R. G., Gillespie, D. and Greig, J. (1986), Use of piezometer cone data, Proc. ASCE Specialty Conf. In Situ 86, Blacksberg, pp. 1263~1280.
- Robertson, P. K. and Campanella, R. G. (1983), Interpretation of Cone Penetration Tests: Sands, Canadian Geotechnical Journal, Vol. 20, No. 4, pp. 719~733.
- Schmertmann, J. H. (1978), Guidelines for Cone Penetration Test Performance and Design, Federal Highway Administration, Report FHWA-TS-78-208, Washington, July.
- Senneset, K., Janbu, N. and Svano, G. (1982), Strength and deformation parameters from cone penetrations tests, Proceedings of the 2nd European Symposium on Penetration Testing, ESOPT-II, Amsterdam, 2, Balkema Pub., Rotterdam, pp. 863~870.
- Tanaka, H. (1995), National report-the current sate of CPT in Japan, Proc. Int. Sym. on Cone Penetration Testing CPT95, Linkoping, Sweden, pp. 115~124.
- Teh, C. I. and Houlsby, G. T. (1991), An analytical study of the cone penetration test in clay, Geotechnique, No. 41, Vol. 1, pp. 17~34.
- Vesic, A. S. (1972), Expanstion of cavities in infinite soil masses, Journal of the Soil Mechanics and Foundation Division, ASCE, Vol. 98, SM3, pp. 265~290. https://doi.org/10.1061/JSFEAQ.0001740