Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the Corrosion Detection Sensor using Multi-Wall Carbon Nanotube

다중벽 탄소나노튜브를 이용한 철근 부식 검출 센서 제작 연구

  • Park, Soobin (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Kim, Sungyeon (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Lee, Sujeong (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Choi, Munjeong (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Hong, Yeongjun (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Kwon, Sungjun (Department of Civil and Environmental Engineering, Hannam University) ;
  • Yoo, Bongyoung (Department of Materials Science and Chemical Engineering, Hanyang University) ;
  • Yoon, Sanghwa (Department of Materials Science and Chemical Engineering, Hanyang University)
  • 박수빈 (한양대학교 재료화학공학과) ;
  • 김성연 (한양대학교 재료화학공학과) ;
  • 이수정 (한양대학교 재료화학공학과) ;
  • 최문정 (한양대학교 재료화학공학과) ;
  • 홍영준 (한양대학교 재료화학공학과) ;
  • 권성준 (한남대학교 토목환경공학과) ;
  • 유봉영 (한양대학교 재료화학공학과) ;
  • 윤상화 (한양대학교 재료화학공학과)
  • Received : 2021.08.26
  • Accepted : 2021.08.30
  • Published : 2021.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, rebar corrosion detection sensor was fabricated using multi-walled carbon nanotubes (MWCNTs). MWCNTs were pre-treated in the acid electrolytes to attach the carboxylic acid to the surface of MWCNTs. The fabricated sensor was attached on the surface of rebar and it detected the corrosion of steel using LCR meter with variation of capacitance. The surface morphology and electrical properties were characterized using scanning electron microscope (SEM) and electrical test equipment, respectively. To verify the corrosion detection characteristics, comparison experiment using plastic bar was performed. Moreover, mechanism of corrosion detection sensor was discussed.

Keywords

Acknowledgement

This research was supported by the National Research Foundation of Korea(NRF)(No. NRF-2020R1A2C2009462). Also this research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Science, ICT & Future Planning(No. 2015R1A5A1037548)

References

  1. 김용수, 사회기반시설물의 유지관리정책 패러다임 전환, 한국시설안전공단, 2015.
  2. Shin, C. G., and Kim, K. J. In Proceedings of the 2nd Forum on Future Policies, Korea Society of Civil Engineering, Ilsan, Korea, KSCE Press, 63(6), 26-40, 2015.
  3. 이형민, 양현민, 이한승, Probabilistic LCC evaluation for Surface Repair of carbonated RC structure, J. Arc. Ins. Kor. Struc. & Const. , 34 (2), 41-48, 2018. https://doi.org/10.5659/JAIK_SC.2018.34.2.41
  4. 윤용식, 김태훈, 권성준, Evaluation of Chloride Diffusion Behavior and Anlalysis of Probabilistic Service Life in Long Term Aged GGBFS Concrete, J. Kor. Inst. Struct. Maint. Insp. , 24 (3), 47-56, 2020. https://doi.org/10.11112/JKSMI.2020.24.3.47
  5. Veerachai Leelaerkiet, Je-Woon Kyung, Masayasu Ohtsu, Masaru Yokota, Analysis of half-cell potential measurement for corrosion of reinforced concrete, Const. and Building Mat., 18 (3), 155-162, 2004. https://doi.org/10.1016/j.conbuildmat.2003.10.004
  6. Ming Jin, Linhua Jiang, Shuya Bai, Shabo Jiamg, Chuansheng Xiong, Zijian Song, Research on the Influence of Distance Between the Improved Ag/AgCl RE and the Steel on the Corrosion Evaluation in Concrete, Int. J. Electrochem. Sci. , 11, 7890-7908, 2016.
  7. Elie Sassine, Stephane Laurens, Raoul Francois, Erick Ringot, A critical discussion on rebar electrical continuity and usual interpretation theresholds in the field of half-cell potential measurements in steel reinforced concrete, Mat. and Struct. , 51. 93, 2018. https://doi.org/10.1617/s11527-018-1221-0
  8. B. Elsener, C. Andrade, J. Gulikers, R. Polder, M. Raupach, Hall-cell potential measurements - Potential mapping on reinforced concrete structures, Mat. and Struct. , 36, 461-471, 2003.
  9. Sumio Lijima, Carbon nanotubes: past, present, and future, Physica B: Condensed Matter, 323 (1-4), 1-5, 2002. https://doi.org/10.1016/S0921-4526(02)00869-4
  10. Byungkwan Kwak, Soobin Park, Han-Seung Lee, Jiwon Kim, Bongyoung Yoo, Improved Chloride Ion Sensing Performance of Flexible Ag-NPs/AgCl Electrode Sensor Using Cu-BTX as an Effective Adsorption Layer, Frontiers in Chemistry, 24, 1-8, 2019.
  11. Miguel A Blesa, Egon Matijevic, ,Phase transformations of iron oxides, oxohydroxides, and hydrous oxides in aqueous media, Adv. Colloid and Intf. Sci., 29 (3-4), 173-221, 1989. https://doi.org/10.1016/0001-8686(89)80009-0
  12. Shujun Gao, Bruce Brown, David Young, Marc Singer, Formation of iron oxide and iron sulfide at high temperature and their effects on corrosion, Corr. Sci. , 135 (1), 167-176, 2018. https://doi.org/10.1016/j.corsci.2018.02.045
  13. kaneko Katsumi, Serizawa Mamoru, Ishikawa Tatsuo, Inouye Katsuya, Dielectric behavior of Water Molecules Adsorbed on Iron(III) Oxide Hydroxides, Bulletin of the Chem. Soc. of Japan, 48 (6), 1764-1769, 1975. https://doi.org/10.1246/bcsj.48.1764
  14. J. Posey-Dowty, B. Moskowitz, D. Crear, R. Hargraves, L. Tanenbaum, E. Dowty, Iron oxide and hydroxide precipitation from ferrous solutions and its relevance to Martian surface mineralogy, Icarus, 66 (1), 105-116, 1986. https://doi.org/10.1016/0019-1035(86)90010-2
  15. Ruth A. Lint, Adam J. Jackson, Aron Walsh, Dielectric response of Fe2O3 crystals and thin films, Chem. Phy. Letters, 586, 67-69, 2013. https://doi.org/10.1016/j.cplett.2013.09.023