DOI QR코드

DOI QR Code

A Study on the Characteristics of Temperature Distribution Related to Geometry of Tube in Hydrogen Storage Vessel

수소 저장용 탱크의 튜브 형상에 따른 온도분포 특성에 대한 수치해석 연구

  • OH, SEUNG JUN (Technical Center for High-Performance Valve, Dong-A University) ;
  • YOON, JEONG HWAN (Technical Center for High-Performance Valve, Dong-A University) ;
  • JEON, KYUNG SOOK (Technical Center for High-Performance Valve, Dong-A University) ;
  • KIM, JAE KYU (Mt.H CONTROL VALVES CO., LTD) ;
  • PARK, JOON HONG (Department of Mechanical Engineering, Dong-A University) ;
  • CHOI, JEONGJU (Department of Mechanical Engineering, Dong-A University)
  • 오승준 (동아대학교 고기능성 밸브 기술지원센터) ;
  • 윤정환 (동아대학교 고기능성 밸브 기술지원센터) ;
  • 전경숙 (동아대학교 고기능성 밸브 기술지원센터) ;
  • 김재규 ;
  • 박준홍 (동아대학교 기계공학과) ;
  • 최정주 (동아대학교 기계공학과)
  • Received : 2021.05.14
  • Accepted : 2021.08.02
  • Published : 2021.08.30

Abstract

Recently, it is necessary for study on renewable energy due to environmental pollution and fossil fuel depletion. Therefore, in this study, the filling temperature according to the nozzle geometry was evaluated based on the limit temperature specified in SAEJ2601 for charging hydrogen, a new energy. There are three types of nozzles, normal, angle and round, fixed the average pressure ramp rate at 52.5 MPa/min, and the injection temperature was set at 293.4 K. As a result, the lowest temperature distribution was found in the round type, although the final temperature did not differ significantly in the three types of nozzles. In addition, Pearson's coefficient was calculated to correlate the mass flow rate with the heat transfer rate at the inner liner wall, which resulted in a strong linear relationship of 0.98 or higher.

Keywords

Acknowledgement

이 논문은 동아대학교 교내연구비 지원에 의하여 연구되었습니다.

References

  1. J. K. Yeom and J. H. Yoon, "Study of behavior characteristics of emulsified fuels with evaporative field", Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 3, 2015, pp. 237-243, doi: http://dx.doi.org/10.3795/KSME-B.2015.39.3.237.
  2. J. K. Yeom and J. H. Yoon, "Basic study of spray-behavior characteristics of emulsified fuel", Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 9, 2014, pp. 763-771, doi: http://dx.doi.org/10.3795/KSME-B.2014.38.9.763.
  3. M. Huo, S. Lin, H. Liu, and C. F. Lee, "Study on the spray and combustion characteristics of water-emulsified diesel", Fuel, Vol. 123, 2014, pp. 218-229, doi: https://doi.org/10.1016/j.fuel.2013.12.035.
  4. S. Y. No, "Application of bio-oils from lignocellulosic biomass to transportation, heat and power generation-a review", Renew Sustain Energy Rev., Vol. 40, 2014, pp. 1108-1125, doi: https://doi.org/10.1016/j.rser.2014.07.127.
  5. Ministry of Economy and Finance, "2050 carbon neutral strategy of the republic of Korea", Ministry of Economy and Finance, 2020. Retrieved from https://www.korea.kr/archive/expDocView.do?docId=39241.
  6. H. W. Lee, D. H. Oh, and Y. J. Seo, "Prediction of changes in filling time and temperature of hydrogen tank according to SOC of hydrogen", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 4, 2020, pp. 345-350, doi: https://doi.org/10.7316/KHNES.2020.31.4.345.
  7. B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equations of state", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 5, 2019, pp. 385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385.
  8. C. J. B. Dicken and W. Merida, "Modeling the transient temperature distribution within a hydrogen cylinder during refueling", J. Numerical Heat Transfer Part A, Vol. 53, No. 7, 2007, pp. 685-708, doi: https://doi.org/10.1080/10407780701634383.
  9. A. Suryan, H. D. Kim, and T. Setoguchi, "Three dimensional numerical computations on the fast filling of a hydrogen tank under different conditions", Int. J. Hydrogen Energy, Vol. 37, No. 9, 2012, pp. 7600-7611, doi: https://doi.org/10.1016/j.ijhydene.2012.02.019.
  10. ANSYS, "2020 ANSYS FLUENT solver theory", 2020. Retrieved from https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v201/en/flu_th/flu_th.html?q=ansys%20fluent%20theory%20guide.
  11. O. Redlich and J. N. S. Kwong, "On the thermodynamics of solutions. V. An equation of state. Fugacities of gaseous solutions", Chem. Rev. Vol. 44, No. 1, 1949, pp. 233-244, doi: https://doi.org/10.1021/cr60137a013.
  12. W. C. Kim, "Modern statistical", 4th ed. YONUNGCHI MUNHWASA, Korea, 2006, pp. 256-325.