로봇학회논문지 (The Journal of Korea Robotics Society)

  • 제16권3호
  • /
  • Pages.223-231
  • /
  • 2021
  • /
  • 1975-6291(pISSN)
  • /
  • 2287-3961(eISSN)
한국로봇학회 (Korea Robotics Society)
권호 표지
DOI QR코드

DOI QR Code

상수도 배관의 갱생 공정을 위한 배관 건설 로봇 개발

Development of the Pipe Construction Robot for Rehabilitation Work Process of the Water Pipe Lines

  • 투고 : 2021.05.14
  • 심사 : 2021.07.26
  • 발행 : 2021.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper describes the research and development of a pipe robot for pipe rehabilitation construction of old water pipes. After the water supply pipe construction, the pipe is leaking, damaged, and aging due to corrosion. Eventually, resistance to the flow of water in lower supply efficiency and contaminated water such as rusty water, finally in various consumer complaints. In order to solve this problem, rehabilitation construction robot technology is required to secure the construction quality of pipe rehabilitation construction and restore the function of the initial construction period. The developed pipe rehabilitation construction robot required a hydraulic actuator for high traction and was equipped with a small hydraulic supply device. In addition, we have developed a hydraulic cylinder and a link system that supports the pipe inner diameter to develop a single pipe robot corresponding to 500 to 800mm pipe diameter. The analysis and experimental verification of the driving performance and unit function of the developed pipe reconstruction robot are explained, and the result of the integrated performance test of the pipe reconstruction robot at the water supply pipe network site is explained.

키워드

과제정보

This project was funded by the Ministry of Trade, Industry and Energy, and is currently supported by the publication grant

참고문헌

  1. 2018 Statistics of waterworks, Ministry of Environment, [Online], http://www.me.go.kr, Accessed: Jan. 17, 2020.
  2. J.-G. Lee, "Review of water supply pipeline rehabilita-tion method and application plan in Daejeon," Daejeon Development Institute, October, 2013, [Online], http://www.dri.re.kr.
  3. W.-S. Han and H.-S. Min, "Water Pipe Rehabilitation Technology," Ssangyong Engineering & Construction, [Online], http://www.ssyenc.com.
  4. J.-Y. Lee, S.-H. Hong, M.-S. Jeong, J.-H. Suh, G.-B. Chung, and K.-R. Han, "Development of Pipe Cleaning Robot for the Industry Pipe Facility," Journal of Korea Robotics Society, vol. 12, no. 1, pp. 65-77, Mar., 2017, DOI: 10.7746/jkros.2017.12.1.065.
  5. J.-J. Kim, D.-K. Kim, S.-H. Cho, H.-R. Yoo, S.-J. Koo, D.-K. Kim, S.-H. Kim, and Y.-W. Rho, "A Study of In-Pipe Robot Technology for the ILI (In-Line Inspection) of Unpiggable Gas Pipelines," The Korean Institute of GAS, pp, 64-64, 2017, [Online], https://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE07175229.
  6. M.-S. Jeong, S.-H. Hong, J.-Y. Lee, Y. Choi, D.-T. Jung, and G.-B. Chung, "Rescue Recovery System Develo-pment of Nondestructive Inspection Pipe Robot," KSPE Autumn Conference, pp. 143-144, 2015, [Online], https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE06600669.
  7. C.-H. Lee, G.-H. Kim, J.-J. Kim, B.-S. Kim, and S.-G. Lee, "A Real-time and Off-line Localization Algorithm for an Inpipe Robot by Detecting Elbows. Journal of Institute of Control, Robotics and Systems," Robotics and Systems, vol. 20, no. 10, pp. 1044-1050, 2014, DOI: 10.5302/J.ICROS.2014.13.0005.
  8. J.-Y. Lee, M.-S. Jeong, and K.-B. Shin, "Development of automated lay-up robot system for jointing process of GRP pipes," Modern Physics Letters B, vol. 34, no. 07n09, 2020, DOI: 10.1142/S0217984920400412.
  9. D.-W. Kim, S.-G. Roh, J.-S. Lee, S.-H. Lee, and H.-R. Chol, "Development of In-Pipe Robot Using Clutch- Based Selective Driving Algorithm," The Korean Soci-ety of Mechanical Engineers, vol. 32, no. 3, pp. 223-231, 2008, DOI: 10.3795/KSME-A.2008.32.3.223.
  10. J.-Y. Lee, S.-H. Hong, M.-S. Jung, K.-R. Han, and J.-H. Suh, "Development of the Robot for In-pipe Cle-aning from 250 to 500A Pipes," Journal of the Korean Society for Power System Engineering, vol. 22, no. 5, pp. 13-26, 2018, DOI: 10.9726/kspse.2018.22.5.013.
  11. K.-J. Lee, T.-I. Kang, J.-W. Lee, H.-J. Park, and J.-H. Kang, "Hydraulic Circuit and Cylinder of Servo Motor Direct Driven Hydraulic Press," Korean Society for Precision Engineering, pp. 1301-1302, 2013, [Online], https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE02207316.
  12. S.-G. Roh, S.-M. Ryew, and H.-R. Choi, "Develop - ment of Differentially Driven Inpipe Inspection Robot for Underground Gas Pipeline," Transactions of the Korean Society of Mechanical Engineers A, vol. 25, no. 12, pp. 2019-2029, 2001, DOI: 10.22634/KSME-.2001.25.12.2019.
  13. H.-S. Choi, W.-H. Na, D.-W. Kang, H.-S. Kang, J.-G. Jeon, and H.-S. Kim, "Development of an In-Pipe Insp-ection and Cleaning Robot," Journal of the Korean Society of Marine Engineering, pp. 662-671, 2009, DOI: 10.5916/jkosme.2009.33.5.662.
  14. S.-C. Han, "Research of Climbing Robot System for Pipe inspection," M.S thesis, Department of Mechani-cal Engineering, Sungkyunkwan University, South Korea 2011, [Online], http://www.riss.kr/link?id=T12669775&outLink=K.