Acknowledgement
This research was funded by National Research Foundation of Korea (NRF) supported by Ministry of Science and ICT (NRF-2018M2A8A4084016, NRF-2019M2D2A2048296).
References
- J.K. Sahu, U. Krupp, R.N. Ghosh, H.J. Christ, Effect of 475℃ Embrittlement on the mechanical properties of duplex stainless steel, Mater. Sci. Eng. 508 (2009) 1-14. https://doi.org/10.1016/j.msea.2009.01.039
- O.K. Chopra, H.M. Chung, Aging of cast duplex stainless steels in LWR systems, Nucl. Eng. Des. 89 (1985) 305-318. https://doi.org/10.1016/0029-5493(85)90069-X
- O.K. Chopra, A. Sather, Initial Assessment of the Mechanisms and Significance of Low-Temperature Embrittlement of Cast Stainless Steels in LWR Systems, U.S.NRC, NUREG/CR-5385, ANL-89-17, 1990.
- H.M. Chung, Aging and life prediction of cast duplex stainless steel components, Int. J. Pres. Ves. Pip. 50 (1992) 179-213. https://doi.org/10.1016/0308-0161(92)90037-G
- M.D. Mathew, L.M. Lietzan, K.L. Murty, V.N. Shah, Low temperature aging Embrittlement of CF-8 stainless steel, Mater. Sci. Eng. 269 (1999) 186-196. https://doi.org/10.1016/S0921-5093(99)00140-9
- J.D. Kwon, J.C. Park, Y.S. Lee, W.H. Lee, Y.W. Park, An investigation of the degradation characteristics for casting stainless steel, CF8M, under high temperatures, Nucl. Eng. Des. 198 (2000) 227-240. https://doi.org/10.1016/S0029-5493(99)00315-5
- F. Xue, Z.X. Wang, G. Shu, W. Yu, H.J. Shi, W. Ti, Thermal aging effect on Z3CN20.09M cast duplex stainless steel, Nucl. Eng. Des. 239 (2009) 2217-2223. https://doi.org/10.1016/j.nucengdes.2009.06.009
- S. Li, Y. Wang, S. Li, H. Zhang, F. Xue, X. Wang, Microstructures and mechanical properties of cast austenite stainless steels after long-term thermal aging at low temperature, Mater. Des. 50 (2013) 886-892. https://doi.org/10.1016/j.matdes.2013.02.061
- W.F. Michaud, P.T. Toben, W.K. Soppet, O.K. Chopra, Tensile-Property Characterization of Thermally Aged Cast Stainless Steels, U.S.NRC, NUREG/CR6275, ANL-94/37, 1995.
- T. Yamada, S. Okano, H. Kuwano, Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel, J. Nucl. Mater. 350 (2006) 47-55. https://doi.org/10.1016/j.jnucmat.2005.11.008
- S.L. Li, Y.L. Wang, H.L. Zhang, S.X. Li, K. Zheng, F. Xue, X.T. Wang, Microstructure Evolution and impact fracture behaviors of Z3CN20-09m stainless steels after long-term thermal aging, J. Nucl. Mater. 433 (2013) 41-49. https://doi.org/10.1016/j.jnucmat.2012.09.004
- O.K. Chopra, W.J. Shack, Mechanical Properties of Thermally Aged Cast Stainless Steels from Shippingport Reactor Components, U.S.NRC, NUREG/CR6275, ANL-94/37, 1995.
- P.L. Delliou, S. Saillet, Large EDF Tests on Aged Cast Duplex Stainless Steel Components e Part I: Reduced Scale Tests, ASME 2015 PVP Conference, 2015. PVP2015-45960.
- S. Kawaguchi, T. Nagasaki, K. Koyama, Prediction Method of Tensile Properties and Fracture Toughness of Thermally Aged Cast Duplex Stainless Steel Piping, ASME 2005 PVP Conference, 2005. PVP2005-71528.
- N. Ligneau, C. Pages, M. Akamatsu, C. Pokor, V. Calonne-Chatelee, Integrity and Life Assessment of Cast Duplex Stainless Steel Elbows Used in the Primary Loops of PWRs, ASME 2009 PVP Conference, 2009. PVP2009-77731.
- O.K. Chopra, Estimation of Fracture Toughness of Cast Stainless Steels during Thermal Aging in LWR Systems, U.S.NRC, NUREG/CR-4513, ANL-15/08, 2016.
- C. Faidy, Ageing Management of Cast Stainless Steel Components in French PWRs, ASME 2012 PVP Conference, 2012. PVP2012-78843.
- J.Y. Jeon, Y.J. Kim, J.W. Kim, S.Y. Lee, Effect of thermal ageing of CF8M on multiaxial ductility and application to fracture toughness prediction, Fatigue Fract. Eng. Mat. 38 (2015) 1466-1477. https://doi.org/10.1111/ffe.12316
- G.G. Youn, H.S. Nam, Y.J. Kim, J.W. Kim, Numerical prediction of thermal aging and cyclic loading effects on fracture toughness of cast stainless steels CF8A: experimental and numerical study, Int. J. Mech. Sci. 163 (2019) 105-120.
- S. Bonnet, J. Bourgoin, J. Champredonde, D. Guttman, M. Guttman, Relationship between Evolution of mechanical properties of various cast duplex stainless steels and metallurgical and aging parameters: outline of current EDF programmes, Mat. Sci. Tech. 6 (1990) 221-229. https://doi.org/10.1179/mst.1990.6.3.221
- Y. Miura, M. Yamamoto, Effect of Aging Temperature on Fracture Toughness of Cast Austenitic Stainless Steel, ASME 2015 PVP Conference, 2015. PVP2015-45434.
- Y. Miura, T. Sawabe, K. Betsuyaku, T. Arai, Thermal Aging Behavior of Grade CF3M Austenitic Stainless Steels, ASME 2017 PVP Conference, 2017. PVP2017-65959.
- M.F. Uddin, G.M. Wilkowski, D. Rudland, R.E. Kurth, F.W. Brust, D.J. Shim, Comparison of Different Thermal Aging Models to Assess Fully Aged Toughness in Cast Austenitic Stainless Steels, ASME 2015 PVP Conference, 2015. PVP2015-45790.
- M.F. Uddin, G.M. Wilkowski, S. Phothana, F.W. Brust, Flaw Evaluation Procedure for Cast Austenitic Stainless Steel Materials Using Thermal Aging Models, ASME 2017 PVP Conference, 2017. PVP2017-66111.
- W.J. Mills, Fracture toughness of type 304 and 316 stainless steels and their welds, Int. Mater. Rev. 42 (1997) 45-82. https://doi.org/10.1179/imr.1997.42.2.45
- I.J. O'Donnel, H. Huthmann, A.A. Tavasolli, The fracture toughness behaviour of austenitic steels and weld metal including the effects of thermal ageing and irradiation, Int. J. Pres. Ves. Pip. 65 (1996) 209-220. https://doi.org/10.1016/0308-0161(94)00132-3
- O.K. Chopra, Effects of Thermal Aging on Fracture Toughness and CharpyImpact Strength of Stainless Steel Pipe Welds, U.S.NRC, NUREG/CR-6428, ANL/EVS-17/3, 2017.
- D.J. Alexander, K.B. Alexander, M.K. Miller, R.K. Nanstad, Y.A. Davidov, The Effect of Aging at 343℃ on the Microstructure and Mechanical Properties of Type 308 Stainless Steel Weldments, U.S.NRC, NUREG/CR-6628, ORNL/TM13767, 2000.
- Y. Miura, T. Arai, Effect of Thermal Aging on Fracture Toughness of Austenitic Stainless Steel Welds, SMiRT-24, 2017 (Division IX.
- JSA, Method of Tensile Test for Metallic Materials, Japanese Standards Association, 2011. JIS Z2241.
- JSA, Method of Elevated Temperature Tensile Test for Steels and Heat-Resisting Alloys, Japanese Standards Association, 2012. JIS G0567.
- ASTM, Standard Test Method for Measurement of Fracture Toughness, American Society for Testing and Materials, 2015. ASTM E1820-15.
- S.H. Hong, H.M. Kim, B.S. Kong, C.H. Jang, I.H. Shin, J.S. Yang, K.S. Lee, Evaluation of the thermal ageing of austenitic stainless steel welds with 10% of dferrites, Int. J. Pres. Ves. Pip. 167 (2018) 32-42. https://doi.org/10.1016/j.ijpvp.2018.10.006
- R.A. Jeshvaghani, E. Harati, M. Shamanian, Effects of surface alloying on microstructure and wear behavior of ductile iron surface-modified with a nickel-based alloy using shielded metal arc welding, Mater. Des. 32 (2011) 1531-1536. https://doi.org/10.1016/j.matdes.2010.10.006
- M.B. Karamis, K. Yildizli, Surface modification of nodular cast iron: a comparative study on graphite Elimination, Mater. Sci. Eng. 527 (2010) 5225-5229. https://doi.org/10.1016/j.msea.2010.04.067
- W. Yu, M. Fan, J. Shi, F. Xue, X. Chen, H. Liu, A comparison between fracture toughness at different locations of SMAW and GTAW welded joints of primary coolant piping, Eng. Fract. Mech. 202 (2018) 135-146. https://doi.org/10.1016/j.engfracmech.2018.09.021
- J.H. Abboud, Microstructure and Erosion characteristic of nodular cast iron surface modified by tungsten inert gas, Mater. Des. 35 (2012) 677-684. https://doi.org/10.1016/j.matdes.2011.09.029
- A. Amirsadeghi, S.M. Heydarzadeh, Comparison of the influence of molybdenum and chromium TIG surface alloying on the microstructure, hardness and wear resistance of ADI, J. Mater. Process. Technol. 201 (2008) 673-677. https://doi.org/10.1016/j.jmatprotec.2007.11.157
- F.C. Hull, Delta ferrite and martensite formation in stainless steels, Weld. Res. 52 (1973) 193-203.
- ASTM, Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content/Thereof, American Society for Testing and Materials, 2015. ASTM A 800/A 800M.