DOI QR코드

DOI QR Code

Effect of gadolinium and boron addition on the texture development and magnetic properties of 23Cr-10NiCu duplex stainless steels

  • Baik, Youl (Quantum Beam Science Division, Korea Atomic Energy Research Institute) ;
  • Kang, Bo Kyeong (Department of Materials Science and Engineering, Yonsei University) ;
  • Choi, Yong (Department of Materials Science and Engineering, Dankook University) ;
  • Woo, Wan Chuck (Quantum Beam Science Division, Korea Atomic Energy Research Institute)
  • 투고 : 2020.06.07
  • 심사 : 2020.11.30
  • 발행 : 2021.06.25

초록

The effect of gadolinium and boron on the texture development and magnetic properties of the texture controlled 23Cr-10NiCu duplex stainless steels were studied to develop a high performance neutron and electromagnetic shielding material. The 23Cr-10NiCu base alloy is composed of 60% of austenite and 40% of ferrite, whereas, the 23Cr-10NiCu-0.5Gd-0.8B modified alloy is composed of 66% of austenite, 27% of ferrite and 7% of CrFeB intermetallic compounds. The gadolinium and boron addition to the 23Cr-10NiCu base alloy increased mechanical properties. Microstructure observation showed that the small addition of 0.5 wt% gadolinium and 0.8 wt% boron to the alloy retarded to form texture at the same hot rolling conditions, and improved the maximum magnetism, residual magnetism and coercive force about 3%, 122% and 120%, respectively.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) granted funded by the Korean government (No. NRF-2017M2A2A6A05017653).

참고문헌

  1. H.Y. Ha, T.H. Lee, S.S. Kim, Effect of W on stress corrosion cracking susceptibility of newly developed Ni-saving duplex stainless steels, Met. Mater. Int. 23 (2017) 115-125. https://doi.org/10.1007/s12540-017-6356-y
  2. N.H. Kim, W. Gil, H.D. Lim, C.H. Choi, H.W. Lee, Variation of mechanical properties and corrosion properties whit Mo contents of Hyper Duplex Stainless-Steel welds, Met. Mater. Int. 25 (2019) 193-206. https://doi.org/10.1007/s12540-018-0166-8
  3. D.H. Kang, N.H. Kim, H.W. Lee, Effect of aging on the corrosion resistance of 2209 duplex stainless steel weldments, Met. Mater. Int. 25 (2019) 740-750. https://doi.org/10.1007/s12540-018-0206-4
  4. Y. Choi, B.M. Moon, D.S. Sohn, Fabrication of Gd containing duplex stainless steel sheet for neutron absorbing structural materials, Nucl. Eng. Tech. 45 (2013) 689-694. https://doi.org/10.5516/NET.07.2013.015
  5. Y. Choi, Y. Baik, B.M. Moon, D.S. Sohn, Corrosion and wear properties of cold rolled 0.087% Gd lean duplex Stainless steels for neutron absorbing material, Nucl. Eng. Tech. 48 (2016) 164-168. https://doi.org/10.1016/j.net.2015.10.002
  6. C.Y. Ho, T.K. Chu, Electrical resistivity and thermal conductivity of nine selected AISI stainless steels, Cindas Rep. 45 (1977).
  7. International Molybdenum Association, Practical Guidelines for the Fabrication of Duplex Stainless Steels, third ed., 2014.
  8. N. Maeda, T. Goto, T. Kamimura, T. Naito, S. Kumano, Y. Nakao, Changes in electromagnetic properties during thermal aging of duplex stainless steel, Int. J. Pres. Ves. Pip. 71 (1997) 7. https://doi.org/10.1016/S0308-0161(96)00015-4
  9. S.S.M. Tavares, M.R. Da Silva, J.M. Neto, Magnetic properties changes during embrittlement of a duplex stainless steel, J. Alloys Compd. 313 (2000) 168-173. https://doi.org/10.1016/S0925-8388(00)01062-8
  10. S.S.M. Tavares, P.D.S. Pedrosa, J.R. Teodosio, M.R. da Silva, J.M. Neto, S. Pairis, Magnetic properties of the UNS S39205 duplex stainless steel, J. Alloys Compd. 351 (2003) 283-288. https://doi.org/10.1016/S0925-8388(02)01076-9
  11. I. Meszaros, Magnetic characterisation of duplex stainless steel, Phys. B Condens. Matter 372 (2006) 181-184. https://doi.org/10.1016/j.physb.2005.10.043