Acknowledgement
This work was supported by the National Natural Science Foundation of China [11232015, 11572355].
References
- B.W. Qiu, J. Wang, Y.B. Deng, M.J. Wang, Y.W. Wu, S.Z. Qiu, A review on thermohydraulic and mechanical-physical properties of SiC, FeCrAl and Ti3SiC2 for ATF cladding, Nucl. Eng. Technol. 52 (2020) 1-13. https://doi.org/10.1016/j.net.2019.07.030
- H.G. Kim, I.H. Kim, J.Y. Park, Y.H. Koo, Application of coating technology on zirconium-based alloy to decrease high-temperature oxidation, in: ASTM Special Technical Publication, 2015, pp. 346-369.
- J. Wang, H. Yeom, P. Humrickhouse, K. Sridharan, M. Corradini, Effectiveness of Cr-coated Zr-alloy clad in delaying fuel degradation for a PWR during a station blackout event, Nucl. Technol. 206 (2019) 467-477. https://doi.org/10.1080/00295450.2019.1649566
- Y. Lee, J.I. Lee, H.C. No, Mechanical analysis of surface-coated zircaloy cladding, Nucl. Eng. Technol. 49 (2017) 1031-1043. https://doi.org/10.1016/j.net.2017.03.012
- M. Wagih, B. Spencer, J. Hales, K. Shirvan, Fuel performance of chromiumcoated zirconium alloy and silicon carbide accident tolerant fuel claddings, Ann. Nucl. Energy 120 (2018) 304-318. https://doi.org/10.1016/j.anucene.2018.06.001
- J. Krejci, J. Kabatova, F. Manoch, J. Koci, L. Cvrcek, J. Malek, S. Krum, P. Sutta, P. Bublikova, P. Halodov a, H.K. Namburi, M. Sevecek, Development and testing of multicomponent fuel cladding with enhanced accidental performance, Nucl. Eng. Technol. 52 (2020) 597-609. https://doi.org/10.1016/j.net.2019.08.015
- T. Dabney, G. Johnson, H. Yeom, B. Maier, J. Walters, K. Sridharan, Experimental evaluation of cold spray FeCrAl alloys coated zirconium-alloy for potential accident tolerant fuel cladding, Nucl. Mater. Energy 21 (2019) 10.
- M. Kennas, H. Kim, J.G. Gigax, T. Wang, B.R. Maier, H. Yeom, G.O. Johnson, T. Dabney, K. Sridharan, K.L. Peddicord, L. Shao, Radiation response of FeCrAlcoated zircaloy-4, J. Nucl. Mater. 536 (2020) 152175. https://doi.org/10.1016/j.jnucmat.2020.152175
- H.G. Kim, I.H. Kim, Y.I. Jung, D.J. Park, J.Y. Park, Y.H. Koo, Adhesion property and high-temperature oxidation behavior of Cr-coated Zircaloy-4 cladding tube prepared by 3D laser coating, J. Nucl. Mater. 465 (2015) 531-539. https://doi.org/10.1016/j.jnucmat.2015.06.030
- K. Hong, J.R. Barber, M.D. Thouless, W. Lu, Cracking of Cr-coated accident-tolerant fuel during normal operation and under power-ramping conditions, Nucl. Eng. Des. 353 (2019) 110275. https://doi.org/10.1016/j.nucengdes.2019.110275
- D.C. Roache, A. Jarama, C.H. Bumgardner, F.M. Heim, J. Walters, J. Romero, B. Maier, X. Li, Unveiling damage mechanisms of chromium-coated zirconium-based fuel claddings by coupling digital image correlation and acoustic emission, Mater. Sci. Eng., A 774 (2020) 138850. https://doi.org/10.1016/j.msea.2019.138850
- K.A. Terrani, Accident tolerant fuel cladding development: Promise, status, and challenges, J. Nucl. Mater. 501 (2018) 13-30. https://doi.org/10.1016/j.jnucmat.2017.12.043
- Y. Lee, M.S. Kazimi, A structural model for multi-layered ceramic cylinders and its application to silicon carbide cladding of light water reactor fuel, J. Nucl. Mater. 458 (2015) 87-105. https://doi.org/10.1016/j.jnucmat.2014.12.013
- D.R. Olander, Fundamental aspects of nuclear reactor fuel element, in: Department of Nuclear Engineering, California University, 1976. Berkeley, USA.
- L. China, Nuclear Power Engineering Co., Suzhou Nuclear Power Research Institute, Nuclear Power Plant Metal Materials Manual, China Electric Power Press, Beijing, 2017.
- G. Simmons, Single crystal elastic constants and calculated aggregate Progress, J. Grad. Res. Cent. 34 (1965) 273.
- A. Masolin, P.O. Bouchard, R. Martini, M. Bernacki, Thermo-mechanical and fracture properties in single-crystal silicon, J. Mater. Sci. 48 (2013) 979-988. https://doi.org/10.1007/s10853-012-6713-7
- L.L. Snead, T. Nozawa, Y. Katoh, T.S. Byun, S. Kondo, D.A. Petti, Handbook of SiC properties for fuel performance modeling, J. Nucl. Mater. 371 (2007) 329-377. https://doi.org/10.1016/j.jnucmat.2007.05.016
- K.A. Terrani, S.J. Zinkle, L.L. Snead, Advanced oxidation-resistant iron-based alloys for LWR fuel cladding, J. Nucl. Mater. 448 (2014) 420-435. https://doi.org/10.1016/j.jnucmat.2013.06.041
- U. Holzwarth, H. Stamm, Mechanical and thermomechanical properties of commercially pure chromium and chromium alloys, J. Nucl. Mater. 300 (2002) 161-177. https://doi.org/10.1016/S0022-3115(01)00745-0
- K.E. Petersen, Silicon as a mechanical material, Proc. IEEE 70 (1982) 420-457. https://doi.org/10.1109/PROC.1982.12331
- B.Q. Yang, K. Zhang, G.N. Chen, G.X. Luo, J.H. Xiao, Measurement of fracture toughness and interfacial shear strength of hard and brittle Cr coating on ductile steel substrate, Surf. Eng. 24 (2008) 332-336. https://doi.org/10.1179/174329408X282587
- F. Ebrahimi, L. Kalwani, Fracture anisotropy in silicon single crystal, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 268 (1999) 116-126. https://doi.org/10.1016/S0921-5093(99)00077-5
- S. Nogami, A. Hasegawa, L.L. Snead, Indentation fracture toughness of neutron irradiated silicon carbide, J. Nucl. Mater. 307 (2002) 1163-1167. https://doi.org/10.1016/S0022-3115(02)01055-3
- K.H. Park, S. Kondo, Y. Katoh, A. Kohyama, Mechanical properties of beta-SiC after Si- and dual Si plus He-ion irradiation at various temperatures, Fusion Sci. Technol. 44 (2003) 455-459. https://doi.org/10.13182/FST03-A377
- M.N. Gussev, K.G. Field, Y. Yamamoto, Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys, Mater. Des. 129 (2017) 227-238. https://doi.org/10.1016/j.matdes.2017.05.009
- R.L. Williamson, Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior, J. Nucl. Mater. 415 (2011) 74-83. https://doi.org/10.1016/j.jnucmat.2011.05.044
- G.R. Irwin, R. de Wit, A summary of fracture mechanics concepts, J. Test. Eval. 11 (1983) 56-65. https://doi.org/10.1520/JTE11586J
- H. Tada, P.C. Paris, G.R. Irwin, Stress Analysis of Cracks Handbook, 3 ed., American Society of Mechanical Engineers, United States, 2000.
- J.L. Beuth Jr., Cracking of thin bonded films in residual tension, Int. J. Solid Struct. 29 (1992) 1657-1675. https://doi.org/10.1016/0020-7683(92)90015-L
- D.B. Bogy, Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading, J. Appl. Mech. 35 (1968) 460-466. https://doi.org/10.1115/1.3601236
- J. Dundurs, Discussion on "Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading, J. Appl. Mech. 36 (1969) 650-652. https://doi.org/10.1115/1.3564739
- V.A. Avincola, P. Guenoun, K. Shirvan, Mechanical performance of SiC three-layer cladding in PWRs, Nucl. Eng. Des. 310 (2016) 280-294. https://doi.org/10.1016/j.nucengdes.2016.10.008
Cited by
- Review on chromium coated zirconium alloy accident tolerant fuel cladding vol.895, pp.p1, 2021, https://doi.org/10.1016/j.jallcom.2021.162450