Nuclear Engineering and Technology

  • 제53권6호
  • /
  • Pages.1786-1795
  • /
  • 2021
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

The optimization for the straight-channel PCHE size for supercritical CO2 Brayton cycle

  • Xu, Hong (College of Energy, Xiamen University) ;
  • Duan, Chengjie (China Nuclear Power Technology Research Institute Co. Ltd) ;
  • Ding, Hao (College of Energy, Xiamen University) ;
  • Li, Wenhuai (China Nuclear Power Technology Research Institute Co. Ltd) ;
  • Zhang, Yaoli (College of Energy, Xiamen University) ;
  • Hong, Gang (College of Energy, Xiamen University) ;
  • Gong, Houjun (Nuclear Power Institute of China)
  • 투고 : 2020.07.19
  • 심사 : 2020.12.01
  • 발행 : 2021.06.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Printed Circuit Heat Exchanger (PCHE) is a widely used heat exchanger in the supercritical carbon dioxide (sCO2) Brayton cycle because it can work under high temperature and pressure, and has been a hot topic in Next Generation Nuclear Plant (NGNP) projects for use as recuperators and condensers. Most previous studies focused on channel structures or shapes. However, no clear advancement has so far been seen in the allover size of the PCHE. In this paper, we proposed an optimal size of the PCHE with a fixed volume. Two boundary conditions of PCHE were simulated, respectively. When the volume of PCHE was fixed, the heat transfer rate and pressure loss were picked as the optimization objectives. The Pareto front was obtained by the Multi-objective optimization procedure. We got the optimized number of PCHE channels under two different boundary conditions from the Pareto front. The comprehensive performance can be increased by 5.3% while holding in the same volume. The numerical results from this study can be used to improve the design of PCHE with straight channels.

키워드

과제정보

The authors would like to acknowledge the financial support by National Natural Science Foundation of China (Grant No. 11705188).

참고문헌

  1. Y. Yu, W. Bai, Y. Wang, Y. Zhang, H. Li, M. Yao, H. Wang, Coupled simulation of the combustion and fluid heating of a 300 MW supercritical CO2 boiler, Appl. Therm. Eng. 113 (2017) 259-267. https://doi.org/10.1016/j.applthermaleng.2016.11.043
  2. A. Moisseytsev, J.J. Sienicki, Investigation of alternative layouts for the supercritical carbon dioxide Brayton cycle for a sodium-cooled fast reactor, Nucl. Eng. Des. 239 (2009) 1362-1371. https://doi.org/10.1016/j.nucengdes.2009.03.017
  3. R. Singh, S. Miller, A. Rowlands, P.A. Jacobs, Dynamic characteristics of a direct-heated supercritical carbon- dioxide Brayton cycle in a solar thermal power plant, Energy 50 (2013) 194-204. https://doi.org/10.1016/j.energy.2012.11.029
  4. S.K. Mylavarapu, X. Sun, R.E. Glosup, R.N. Christensen, M.W. Patterson, Thermal hydraulic performance testing of printed circuit heat exchangers in a high-temperature helium test facility, Appl. Therm. Eng. 65 (2014) 605-614. https://doi.org/10.1016/j.applthermaleng.2014.01.025
  5. J.W. Seo, Y.H. Kim, D. Kim, Y.D. Choi, K.J. Lee, Heat transfer and pressure drop characteristics in straight microchannel of printed circuit heat exchangers, Entropy 17 (2015) 3438-3457. https://doi.org/10.3390/e17053438
  6. Z. Zhao, Y. Zhang, X. Chen, X. Ma, S. Yang, S. Li, A numerical study on condensation flow and heat transfer of refrigerant in minichannels of printed circuit heat exchanger, Int. J. Refrig. 102 (2019) 96-111. https://doi.org/10.1016/j.ijrefrig.2019.03.016
  7. Z. Ren, C. Zhao, P. Jiang, H. Bo, Investigation on local convection heat transfer of supercritical CO2 during cooling in horizontal semicircular channels of printed circuit heat exchanger, Appl. Therm. Eng. 157 (2019) 113697. https://doi.org/10.1016/j.applthermaleng.2019.04.107
  8. S.J. Yoon, J.E. Obrien, M. Chen, P. Sabharwall, X. Sun, Development and validation of Nusselt number and friction factor correlations for laminar flow in semi-circular zigzag channel of printed circuit heat exchanger, Appl. Therm. Eng. 123 (2017) 1327-1344. https://doi.org/10.1016/j.applthermaleng.2017.05.135
  9. J. Pan, J. Wang, L. Tang, J. Bai, R. Li, Y. Lu, G. Wu, Numerical investigation on thermal-hydraulic performance of a printed circuit LNG vaporizer, Appl. Therm. Eng. 165 (2020) 114447. https://doi.org/10.1016/j.applthermaleng.2019.114447
  10. H. Zhang, J. Guo, X. Huai, K. Cheng, X. Cui, Studies on the thermal-hydraulic performance of zigzag channel with supercritical pressure CO2, J. Supercrit. Fluids 148 (2019) 104-115. https://doi.org/10.1016/j.supflu.2019.03.003
  11. A.M. Aneesh, A. Sharma, A. Srivastava, P. Chaudhury, Effects of wavy channel configurations on thermal- hydraulic characteristics of Printed Circuit Heat Exchanger (PCHE), Int. J. Heat Mass Tran. 118 (2018) 304-315. https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.111
  12. Y.J. Baik, S. Jeon, B. Kim, D. Jeon, C. Byon, Heat transfer performance of wavy-channeled PCHEs and the effects of waviness factors, Int. J. Heat Mass Tran. 114 (2017) 809-815. https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.119
  13. X. Xu, T. Ma, L. Li, M. Zeng, Y. Chen, Y. Huang, Q. Wang, Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO2 cycle, Appl. Therm. Eng. 70 (2014) 867-875. https://doi.org/10.1016/j.applthermaleng.2014.05.040
  14. X. Cui, J. Guo, X. Huai, K. Cheng, H. Zhang, M. Xiang, Numerical study on novel airfoil fins for printed circuit heat exchanger using supercritical CO2, Int. J. Heat Mass Tran. 121 (2018) 354-366. https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.015
  15. F. Chen, L. Zhang, X. Huai, J. Li, H. Zhang, Z. Liu, Comprehensive performance comparison of airfoil fin PCHEs with NACA 00XX series airfoil, Nucl. Eng. Des. 315 (2017) 42-50. https://doi.org/10.1016/j.nucengdes.2017.02.014
  16. G. Koo, S. Lee, K. Kim, Shape optimization of inlet part of a printed circuit heat exchanger using surrogate modeling, Appl. Therm. Eng. 72 (2014) 90-96. https://doi.org/10.1016/j.applthermaleng.2013.12.009
  17. H. Shi, T. Ma, W. Chu, Q. Wang, Optimization of inlet part of a microchannel ceramic heat exchanger using surrogate model coupled with genetic algorithm, Energy Convers. Manag. 149 (2017) 988-996. https://doi.org/10.1016/j.enconman.2017.04.035
  18. W. Chu, X. Li, T. Ma, Y. Chen, Q. Wang, Study on hydraulic and thermal performance of printed circuit heat transfer s urface with distributed airfoil fins, Appl. Therm. Eng. 114 (2017) 1309-1318. https://doi.org/10.1016/j.applthermaleng.2016.11.187
  19. S.M. Lee, K.Y. Kim, Shape optimization of a printed-circuit heat exchanger to enhance thermal-hydraulic performance, Proceedings of International Congress on Advances in Nuclear Power Plants 1 (2012), 12363.
  20. M. Saeed, M.H. Kim, Thermal-hydraulic analysis of sinusoidal fin-based printed circuit heat exchangers for supercritical CO2 Brayton cycle, Energy Convers. Manag. 193 (2019) 124-139. https://doi.org/10.1016/j.enconman.2019.04.058
  21. J.G. Kwon, T.H. Kim, H.S. Park, J.E. Cha, M.H. Kim, Optimization of airfoil-type PCHE for the recuperator of small scale brayton cycle by cost-based objective function, Nucl. Eng. Des. 298 (2016) 192-200. https://doi.org/10.1016/j.nucengdes.2015.12.012
  22. Y. Yang, H. Li, M. Yao, Y. Zhang, C. Zhang, L. Zhang, S. Wu, Optimizing the size of a printed circuit heat exchanger by multi-objective genetic algorithm, Appl. Therm. Eng. 167 (2020) 114811. https://doi.org/10.1016/j.applthermaleng.2019.114811
  23. A. Meshram, A.K. Jaiswal, S.D. Khivsara, J.D. Ortega, C. Ho, R. Bapat, P. Dutta, Modeling and analysis of a printed circuit heat exchanger for supercritical CO2 power cycle applications, Appl. Therm. Eng. 109 (2016) 861-870. https://doi.org/10.1016/j.applthermaleng.2016.05.033
  24. Modelica Association, Modelica specification 3.3, 2016.
  25. E.W. Lemmon, M.L. Huber, M.O. Mclinden, NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Propert Ies-REFPROP 9.0, NIST NSRDS, 2010.
  26. V. Gnielinski, New equations for heat and mass transfer in the turbulent flow in pipes and channels, in: NASA STI/recon technical report A, 75, 1975, pp. 8-16.
  27. I.H. Kim, H.C. No, J.I. Lee, B.G. Jeon, Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations, Nucl. Eng. Des. 239 (11) (2009) 2399-2408. https://doi.org/10.1016/j.nucengdes.2009.07.005
  28. S.M. Lee, K.Y. Kim, Shape optimization of a printed-circuit heat exchanger to enhance thermal-hydraulic performance, in: International Congress on Advances in Nuclear Power Plants, ICAPP, 2012, 2012.

피인용 문헌

  1. Performance Analysis of a Printed Circuit Heat Exchanger with a Novel Mirror-Symmetric Channel Design vol.14, pp.14, 2021, https://doi.org/10.3390/en14144252