DOI QR코드

DOI QR Code

Evaluation of equivalent friction damping ratios at bearings of welded large-scale domes subjected to earthquakes

  • Zhang, Huidong (School of Civil Engineering, Tianjin Chengjian University) ;
  • Zhu, Xinqun (School of Civil and Environmental Engineering, University of Technology Sydney) ;
  • Wang, Yuanfeng (School of Civil Engineering, Beijing Jiaotong University) ;
  • Yao, Shu (School of Civil Engineering, Tianjin Chengjian University)
  • Received : 2019.12.12
  • Accepted : 2020.11.02
  • Published : 2021.08.25

Abstract

The major sources of damping in steel structures are within the joints and the structural material. For welded large-scale single-layer lattice domes subjected to earthquake ground motions, the stick-slip phenomenon at the bearings is an important source of the energy dissipation. However, it has not been extensively investigated. In this study, the equivalent friction damping ratio (EFDR) at the bearings of a welded large-scale single-layer lattice dome subjected to earthquake ground motions is quantified using an approximate method based on the energy balance concept. The complex friction behavior and energy dissipation between contact surfaces are investigated by employing an equivalent modeling method. The proposed method uses the stick-slip-hook components with a pair of circular isotropic friction surfaces having a variable friction coefficient to model the energy loss at the bearings, and the effect of the normal force on the friction force is also considered. The results show that the EFDR is amplitude-dependent and is related to the intensity of the ground motions; it exhibits complex characteristics that cannot be described by the conventional models for damping ratios. A parametric analysis is performed to investigate in detail the effects of important factors on the EFDR. Finally, the friction damping mechanism at bearings is discussed. This study enables researchers and engineers to have a better understanding of the essential characteristics of friction damping under earthquake ground motions.

Keywords

Acknowledgement

The authors gratefully acknowledge the financial support provided by the National Key Research and Development Program of China (Grant No. 2018YFC1504304), the Key Project of the Natural Science Foundation of Tianjin (Grant No. 19JCZDJC39300), and the National Natural Science Foundation of China (Grant No. 51878433).

References

  1. Amabili, M. (2018), "Nonlinear damping in nonlinear vibrations of rectangular plates: Derivation from viscoelasticity and experimental validation", J. Mech. Phys. Solids, 118, 275-292. https://doi.org/10.1016/j.jmps.2018.06.004.
  2. Anoushehei, M., Daneshjoo, F., Mahboubi, S. and Khazaeli, S. (2017), "Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials", Steel Compos. Struct., 24(2), 239-248. https://doi.org/10.12989/scs.2017.24.2.239.
  3. Beards, C.F. (1996), Structural Vibration: Analysis and Damping, Butterworth-Heinemann Elsevier Ltd, Oxford, United Kingdom.
  4. Cheraghbak, A., Dehkordi, M.B. and Golestanian, H. (2019), "Vibration analysis of sandwich beam with nanocomposite facesheets considering structural damping effects", Steel Compos. Struct., 32(6), 795-806. https://doi.org/10.12989/scs.2019.32.6.795.
  5. Clarence, W.S. (2005), Vibration and Shock Handbook, CRC Press, Boca Raton, Florida, USA.
  6. CSI (Computers and Structures, Inc.) (2006), Perform 3D, Nonlinear Analysis and Performance Assessment for 3D Structures, User Guide, Version 4.
  7. Demir, E. (2016), "A study on natural frequencies and damping ratios of composite beams with holes", Steel Compos. Struct., 21(6), 1211-1226. https://doi.org/10.12989/scs.2016.21.6.1211.
  8. Dwairi, H.M., Kowalsky, M.J. and Nau, J.M. (2007), "Equivalent damping in support of direct displacement-based design", J. Earthq. Eng., 11(4), 512-530. https://doi.org/10.1080/13632460601033884.
  9. Feeny, B.F. and Liang, J.W. (1996), "A decrement method for the simultaneous estimation of coulomb and viscous friction", J. Sound Vib., 195(1), 149-154. https://doi.org/10.1006/jsvi.1996.0411.
  10. Gounaris, G.D., Antonakakis, E. and Papadopoulos, C.A. (2007), "Hysteretic damping of structures vibrating at resonance: An iterative complex eigensolution method based on damping-stress relation", Comput. Struct., 85(23-24), 1858-1868. https://doi.org/10.1016/j.compstruc.2007.02.026.
  11. Grigoriev, I.S., Meilikhov, E.Z. and Radzig, A.A. (1997), Handbook of Physical Quantities, CRC Press, Boca Raton, Florida, USA.
  12. Han, W.J., Kim, S.Y., Lee, J.S. and Byun, Y.H. (2019), "Friction behavior of controlled low strength material-soil interface", Geomech. Eng., 18(4), 407-415. https://doi.org/10.12989/gae.2019.18.4.407.
  13. Huang, Y.L., Richard, S. and Michael, W. (2019), "A damping model for nonlinear dynamic analysis providing uniform damping over a frequency range", Comput. Struct., 212, 101-109. https://doi.org/10.1016/j.compstruc.2018.10.016.
  14. Ikuo, T., Tatsuo, H., Yoshimichi, A. and Satoshi, F. (1997), "Vibration tests on a full-size suspen-dome structure", Int. J. Space Struct., 12(3-4), 217-224. https://doi.org/10.1177/026635119701200310.
  15. Jacobsen, L.S. (1930), "Steady forced vibrations as influenced by damping", Trans. ASME-APM, 52(15), 169-181.
  16. Kareem, A. and Gurley, K. (1996), "Damping in structures: its evaluation and treatment of uncertainty", J. Wind Eng. Ind. Aerod., 59(2-3), 131-157. https://doi.org/10.1016/0167-6105(96)00004-9
  17. Kwan, W.P. and Billington, S.L. (2003), "Influence of hysteretic behavior on equivalent period and damping of structural systems", J. Struct. Eng.- ASCE, 129(5), 576-585. https://doi.org/10.1061/(asce)0733-9445(2003)129:5(576).
  18. Liu, T., Zordan, T., Zhang Q. and Briseghella B. (2015), "Equivalent viscous damping of bilinear hysteretic oscillators", J. Struct. Eng. -ASCE, 141(11), 06015002. https://doi.org/10.1061/(asce)st.1943-541x.0001262.
  19. Mashhadi, J. and Saffari, H. (2016), "Effects of damping ratio on dynamic increase factor in progressive collapse", Steel Compos. Struct., 22(3), 677-690. https://doi.org/10.12989/scs.2016.22.3.677.
  20. Oden, J.T. and Martins, J.A.C. (1985), "Models and computational methods for dynamic friction phenomena", Comput. Method. Appl. M., 52(1-3), 527-534. https://doi.org/10.1016/0045-7825(85)90009-x.
  21. Papagiannopoulos, G.A. (2018), "Jacobsen's equivalent damping concept revisited", Soil Dyn. Earthq. Eng., 115, 82-89. https://doi.org/10.1016/j.soildyn.2018.08.001.
  22. Petrini, L., et.al. (2008), "Experimental verification of viscous damping modeling for inelastic time history analyzes", J. Earthq. Eng., 12(S1), 125-145. https://doi.org/10.1080/13632460801925822.
  23. Tamura, Y. (2012), "Amplitude dependency of damping in buildings and critical tip drift ratio", Int. J. High-Rise Build., 1(1), 1-13. https://doi.org/10.1061/41000(315)39.
  24. Teng, J., Zhu, Y.H. and Zhou, F. (2010), "Finite element model updating for large span spatial steel structure considering uncertainties", J. Cent. South Univ. Technol., 17(4), 857-862. https://doi.org/10.1007/s11771-010-0567-4.
  25. Tzan, S.R. and Pantelides, C.P. (1998), "Active structures considering energy dissipation through damping and plastic yielding", Comput. Struct., 66, 411-433. https://doi.org/10.1016/s0045-7949(97)00079-5.
  26. Wang, Y.F., Pan, Y.H., Wen, J., Su, L. and Mei, S.Q. (2014), "Influence of some key factors on material damping of steel beams", Struct. Eng. Mech., 49(3), 285-296. https://doi.org/10.12989/sem.2014.49.3.285.
  27. Woodhouse, J. (1998), "Linear damping models for structural vibration", J. Sound Vib., 215(3), 547-569. https://doi.org/10.1006/jsvi.1998.1709.
  28. Yang, F.Y., Zhi, X.D. and Fan, F. (2019), "Effect of complex damping on seismic responses of a reticulated dome and shaking table test validation", Thin Wall. Struct., 134, 407-418. https://doi.org/10.1016/j.tws.2018.10.025.
  29. Zhang, H.D. and Wang, Y.F. (2012), "Energy-based numerical evaluation for seismic performance of a high-rise steel building", Steel Compos. Struct., 13(6), 501-519. https://doi.org/10.12989/scs.2012.13.6.501.
  30. Zhang, H.D., Zhu, X.Q., Li, Z.X. and Yao, S. (2019), "Displacement-dependent nonlinear damping model in steel buildings with bolted joints", Adv. Struct. Eng., 22(5), 1049-1061. https://doi.org/10.1177/1369433218804321.