DOI QR코드

DOI QR Code

Three Phase Drive Transfer Algorithm for Fault Tolerance Control of Six-Phase PMSM

6상 영구자석 동기전동기의 고장대응운전을 위한 3상 구동시스템 전환 알고리즘

  • Kim, Seong-Hoon (Dept. of Electronic Engineering, Korea Nat'l University of Transportation) ;
  • Jang, Won-Jin (Dept. of Electronic Engineering, Korea Nat'l University of Transportation) ;
  • Cho, Kwan-Yuhl (Dept. of Electronic Engineering, Korea Nat'l University of Transportation) ;
  • Kim, Hag-Wone (Dept. of Electronic Engineering, Korea Nat'l University of Transportation)
  • Received : 2021.01.31
  • Accepted : 2021.04.01
  • Published : 2021.08.20

Abstract

Six-phase motors can be used in industrial applications, such as an electric vehicle, due to their high reliability and low current magnitude per phase. An asymmetrical PMSM with two sets of three-phase windings is a commonly used structure for six-phase motors, with each winding set demonstrating a phase difference of 30°. Although the asymmetrical PMSM presents low torque ripples, its dynamic torque response deteriorates due to coupled components in the two three-phase windings. The decoupled VSD control is applied to eliminate the coupling effect. Load ratio control of two inverters for the six-phase PMSM is proposed in this study. DQ currents are controlled on the basis of two synchronous reference frames, and the six-phase drive system can be changed to a three-phase drive system when one inverter presents fault conditions. The operation and effectiveness of the proposed algorithm is verified through simulation and experiments. The six-phase drive system is transferred to a three-phase drive system by changing the current reference of the second DQ reference frame. Moreover, control of both torque and speed exhibits satisfactory performance before and after the mode change.

Keywords

Acknowledgement

이 연구는 2020년 산업통산자원부 및 산업기술평가관리원(KEIT) 연구비('20011437')와 2021년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 에너지인력양성사업(No. 20184030202270)으로 지원받아 수행한 인력양성 성과입니다.

References

  1. Y. Hu, Z. Q. Zhu, and M. Odavic, "Comparison of two-individual current control and vector space decomposition control for dual three-phase pmsm," IEEE Transactions on Industry Applications, Vol. 53, No. 5, pp. 4483-4492, Sep. 2017. https://doi.org/10.1109/TIA.2017.2703682
  2. J. Karttunen, S. Kallio, P. Peltoniemi, P. Silventoinen, and O. Pyrhonen, "Dual three-phase permanent magnet synchronous machine supplied by two independent voltage source inverters," International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Sorrento, pp. 741-747, 2012.
  3. K. Zhang, H. M. Kojabadi, P. Z. Wang, and L. Chang, "Modeling of a converter-connected six-phase permanent magnet synchronous generator," IEEE International Conference on P ower Electronics and Drives Systems (PEDS), Singapore, pp. 1096-1100, Apr. 2005.
  4. J. Karttunen, S. Kallio, P. Peltoniemi, P. Silventoinen, and O. Pyrhonen, "Decoupled vector control scheme for dual three-phase permanent magnet synchronous machines," IEEE Transactions on Industrial Electronics, Vol. 61, No. 5, pp. 2185-2196, 2014. https://doi.org/10.1109/TIE.2013.2270219
  5. S. Kallio, M. Andriollo, A. Tortella, and J. Karttunen, "Decoupled d-q model of double star interior permanent magnet synchronous machines," IEEE Transactions on Industrial Electronics, Vol. 60, No. 6, pp. 2486-2494, 2013. https://doi.org/10.1109/TIE.2012.2216241
  6. M. Andriollo, G. Bettanini, G. Martinelli, A. Morini, and A. Tortella, "Analysis of double star permanent magnet synchronous generators by a general decoupled d-q model," IEEE International Electric Machines & Drives Conference, Antalya, pp. 7-12, 2007.
  7. B. Lu and S. K. Sharma, "A literature review of IGBT fault diagnostic and protection methods for power inverters," IEEE Trans. on Industry Applications, Vol. 45, No. 5, pp. 1770-1777, Sep. 2009. https://doi.org/10.1109/TIA.2009.2027535