참고문헌
- Aiken, I.D. and Kelly, J.M. (1992), "Earthquake simulator testing and analytical studies of two energy-absorbing systems for multi story structures", UCB/EERC-90/03 October 1990, Earthquake Engineering Research Center, College of Engineering, University of California at Berkeley.
- Barzegar, V., Laflamme, S., Downey, A., Li, M. and Hu, C. (2020), "Numerical evaluation of a novel passive variable friction damper for vibration mitigation", Eng. Struct., 220, 110920. https://doi.org/10.1016/j.engstruct.2020.110920.
- Connor, J.J. (2003), Introduction to Structural Motion Control, Prentice Hall Pearson Education, New Jersy, USA.
- Filiatrault, A. (1988), "Seismic design of friction damped braced steel plane frames by energy methods", Ph.D. Dissertation, University of British Columbia, Vancouver, Canada. https://doi.org/10.14288/1.0062815.
- Filiatrault, A. and Cherry, S. (1987), "Performance evaluation of friction damped braced steel frames under simulated earthquake loads", Earthq. Spectra, 3(1), 57-78, https://doi.org/10.1193/1.1585419.
- Filiatrault, A. and Cherry, S. (1990), "Seismic design spectra for friction-damped structures", J. Struct. Eng., 116(5), 1334-1355. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1334).
- Fitzgerald, T., Anagnos, T., Goodson, M. and Zsutty, T. (1989), "Slotted bolted connections in aseismic design for concentrically braced connections", Earthq. Spectra, 5(2), 383-391. https://doi.org/10.1193/1.1585528.
- Francavilla, A.B., Latour, M., Piluso, V. and Rizzano, G. (2020), "Design criteria for beam-to-column connections equipped with friction devices", J. Constr. Steel Res., 172, 106240. https://doi.org/10.1016/j.jcsr.2020.106240.
- Garini, E. and Gazetas, G. (2012). "Destructiveness of earthquake ground motions: "Intensity Measures" versus sliding displacement", Proceedings of the 2nd International Conference on Performance-based Design in Earthquake Geotechnical Engineering, Taormina, Italy, May.
- Grigorian, C.E., Yang, T.S. and Popov, E.P. (1993), "Slotted bolted connection energy dissipators", Earthq. Spectra, 9(3), 491-504. https://doi.org/10.1193/1.1585726.
- Lai, S.S.P. (1982), "Statistical characterization of strong ground motions using power spectral density function", Bull. Seismol. Soc. Am., 72(1), 259-274. https://doi.org/10.1785/BSSA0720010259.
- Latour, M., Piluso, V. and Rizzano, G. (2018a), "Experimental analysis of beam-to-column joints equipped with sprayed aluminium friction dampers", J. Constr. Steel Res., 146, 33-48. https://doi.org/10.1016/j.jcsr.2018.03.014.
- Latour, M., D'Aniello, M., Zimbru, M., Rizzano, G., Piluso, V. and Landolfo, R. (2018b), "Removable friction dampers for low-damage steel beam-to-column joints", Soil Dyn. Earthq. Eng., 115, 66-81. https://doi.org/10.1016/j.soildyn.2018.08.002.
- Lee, S.H., Park, J.H., Lee, S.K. and Min, K.W. (2008), "Allocation and slip load of friction dampers for a seismically excited building structure based on storey shear force distribution", Eng. Struct., 30(4), 930-940, https://doi.org/10.1016/j.engstruct.2007.03.020.
- Lee, C.H., Kim, J., Kim, D.H., Ryu, J. and Ju, Y.K. (2016), "Numerical and experimental analysis of combined behavior of shear-type friction damper and non-uniform strip damper for multi-level seismic protection", Eng. Struct., 114, 75-92. https://doi.org/10.1016/j.engstruct.2016.02.007.
- Martinez, C.A. and Curadelli, O. (2017), "Testing and performance of a new friction damper for seismic vibration control", J. Sound Vib., 399, 60-74. https://doi.org/10.1016/j.jsv.2017.03.022.
- Mohammadi, R.K., Mirjalaly, M., Mirtaheri, M. and Nazeryan, M. (2018), "Comparison between uniform deformation method and Genetic Algorithm for optimizing mechanical properties of dampers", Earthq. Struct., 1(14), 1-10. http://doi.org/10.12989/eas.2018.14.1.001.
- Monir, H.S. and Zeynali, K. (2013), "A modified friction damper for diagonal bracing of structures", J. Constr. Steel Res., 87, 17-30. https://doi.org/10.1016/j.jcsr.2013.04.004.
- Moreschi, L. and Singh, M. (2003), "Design of yielding metallic and friction dampers for optimal seismic performance", Earthq. Eng. Struct. Dyn., 32(8), 1291-1311. https://doi.org/10.1002/eqe.275.
- Mostofi-Afshar, P. and Zahrai, S.M. (2020). "Seismic retrofit of steel buildings using external resistant rc walls and friction dampers", Struct. Eng. Mech., 76(6), 823-837. https://doi.org/10.12989/sem.2020.76.6.823.
- Nabid, N., Hajirasouliha, I. and Petkovski, M. (2017), "A practical method for optimum seismic design of friction wall dampers", Earthq. Spectra, 33(3), 1033-1052. https://doi.org/10.1193/110316eqs190m.
- Nabid, N., Hajirasouliha, I. and Petkovski, M. (2019), "Simplified method for optimal design of friction damper slip loads by considering near-field and far-field ground motions", J. Earthq. Eng., 1-25. https://doi.org/10.1080/13632469.2019.1605316.
- Ng, C.L. and Xu, Y.L. (2006a), "Seismic response control of a building complex utilizing passive friction damper: Analytical study", Struct. Eng. Mech., 22(1), 85-105. https://doi.org/10.12989/sem.2006.22.1.085.
- Ng, C.L. and Xu, Y.L. (2006b), "Seismic response control of a building complex utilizing passive friction damper: experimental investigation", Earthq. Eng. Struct. Dyn., 35(6), 657-677. https://doi.org/10.1002/eqe.549.
- Nims, D.K., Richter, P.J. and Bachman, R.E. (1993), "The use of the energy dissipating restraint for seismic hazard mitigation", Earthq. Spectra, 9(3), 467-489. https://doi.org/10.1193/1.1585725.
- Ontiveros-Perez, S.P., Miguel, L.F.F. and Riera, J.D. (2019), "Reliability-based optimum design of passive friction dampers in buildings in seismic regions", Eng. Struct., 190, 276-284. https://doi.org/10.1016/j.engstruct.2019.04.021.
- Ozkaynak, H. (2017), "The effects of special metallic dampers on the seismic behavior of a vulnerable RC frame", Struct. Eng. Mech., 61(4), 483-496. https://doi.org/10.12989/sem.2017.61.4.483.
- Pall, A.S. and Marsh, C. (1982), "Response of friction damped braced frames", J. Struct. Eng., 108(9), 1313-1323. https://doi.org/10.1061/JSDEAG.0005968.
- Pall, A.S., Marsh, C. and Fazio, P. (1980), "Friction joints for seismic control of large panel structures", J. Prestress.Concrete Inst., 25(6), 38-61. https://doi.org/10.15554/pcij.11011980.38.61.
- Qu, W.L., Chen, Z.H. and Xu, Y.L. (2001), "Dynamic analysis of wind-excited truss tower with friction dampers", Comput. Struct., 79(32), 2817-2831. https://doi.org/10.1016/S0045-7949(01)00151-1.
- Quintana, H.C. and Petkovski, M. (2018), "Optimum performance of structural control with friction dampers", Eng. Struct., 172, 154-162. https://doi.org/10.1016/j.engstruct.2018.06.017.
- Standard 2800 (2007), Iranian Code of Practice for Seismic Resistant Design of Buildings, Permanent Committee of Revising the Code of Practice for Seismic resistant Design of Buildings, BHRC Publication, Tehran, IRAN.
- Taiyari, F., Mazzolani, F.M. and Bagheri, S. (2019), "Damage-based optimal design of friction dampers in multistory chevron braced steel frames", Soil Dyn. Earthq. Eng., 119, 11-20. https://doi.org/10.1016/j.soildyn.2019.01.004.
- Vanmarcke, E.H. and Lai, S.S.P. (1980), "Strong-motion duration and RMS amplitude of earthquake records", Bull. Seismol. Soc. Am., 70(4), 1293-1307. https://doi.org/10.1785/BSSA0700041293.
- Vaseghi Amiri, J., Navayinia, B. and Navaei, S. (2011), "Evaluation of performance of eccentric braced frame with friction damper", Struct. Eng. Mech., 39(5), 717-732. https://doi.org/10.12989/sem.2011.39.5.717.
- Zahrai, S.M., Bozorgvar, M.S. and Bozorgvar, M.H. (2014), "Application of friction pendulum damper in braced frames and its effects on structural response", Int. J. Eng. Technol., 6(6), 487. https://doi.org/10.7763/IJET.2014.V6.746.
- Zahrai, S.M., Moradi, A. and Moradi, M. (2015), "Using friction dampers in retrofitting a steel structure with masonry infill panels", Steel Compos. Struct., 19(2), 309-325. http://dx.doi.org/10.12989/scs.2015.19.2.309.
- Zhou, Q. and Lu, X. (2004), "Shaking table test and numerical analysis of a combined energy dissipation system with metallic yield dampers and oil dampers", Struct. Eng. Mech., 17(2), 187-201. https://doi.org/10.12989/sem.2004.17.2.187.