DOI QR코드

DOI QR Code

무기체계 구성장치의 연결성 제어 및 자율 재구성을 위한 플러그앤플레이 프레임워크

Plug-and-Play Framework for Connectivity Control and Self-Reconfiguration of Weapon System Components

  • 장혜민 (국방과학연구소 지상기술연구원) ;
  • 강석종 (국방과학연구소 지상기술연구원) ;
  • 조영걸 (국방과학연구소 지상기술연구원) ;
  • 윤주홍 (국방과학연구소 지상기술연구원) ;
  • 윤지혁 (국방과학연구소 지상기술연구원)
  • Chang, HyeMin (Ground Technology Research Institute, Agency for Defense Development) ;
  • Kang, SukJong (Ground Technology Research Institute, Agency for Defense Development) ;
  • Cho, YoungGeol (Ground Technology Research Institute, Agency for Defense Development) ;
  • Yoon, JooHong (Ground Technology Research Institute, Agency for Defense Development) ;
  • Yun, Jihyeok (Ground Technology Research Institute, Agency for Defense Development)
  • 투고 : 2021.01.14
  • 심사 : 2021.04.15
  • 발행 : 2021.06.05

초록

A study on common modular design based on open standards to reduce the life cycle cost of ground weapon system is underway. Since the ground weapon system includes major mission equipment such as fire control system, it is essential to apply the concept of fault tolerance through automatic reconfiguration and blocking unspecified equipment through connectivity control. However, it is difficult to generalize due to the difference in operating characteristics for each system. In this paper, we propose a plug-and-play framework, which includes plug-and-play architecture and mechanism. The proposed method can be used in common by the application of each component as it is divided into a common service layer. In addition, the proposed connectivity control and autonomous reconfiguration method facilitates reflection of operating characteristics for each system. We constructed a verification environment that can simulate ground weapon systems and components, and verified that the proposed framework works through scenario-based functional tests.

키워드

참고문헌

  1. Effective January 1, 2016, UPnP Forum Assigned Their Assets to the Open Connectivity Foundation (OCF).
  2. OMG, The Real-Time Publish-Subscribe Wire Protocol DDS Interoperability Wire Protocol Specification, V2.1, http://www.omg.org/spec/DDS-RTPS/2.1, 2010.
  3. OMG, Data Distribution Service for Real-time Systems Version 1.2. http://www.omg.org.
  4. H. M. Chang, et. al., "An Architectural Improvement of Fire Control Software for Ground Combat Vehicle," KIMST Annual Conference Proceedings, pp. 1527-1528, 2018.
  5. S. J. Kang, et. al., "Open Architecture Design for Fire Control System of Combat Vehicle," KIMST Annual Conference Proceedings, pp. 1342-1343, 2019.
  6. Soraya Sinche, et. al., "A Survey of IoT Management Protocols and Frameworks," IEEE Communications Surveys & Tutorials, Vol. 22, No. 2, Second Quarter 2020.
  7. OCF(2020), 'OCF Core Specification v2.1.2'.
  8. oneM2M, "oneM2M TR-0009 v0.4.0 - Technical Report - Protocol Analysis, January 2014.
  9. H. M. Chang, et. al., "Adapting PnP to Fire Control System with Service Authorization," KIMST Fall Conference Proceedings, pp. 116-117, 2019.
  10. Y. J. Lee, et. al., "A Study on the Fault Tolerant Design of Ground Weapons System Based on Distributed System," KIMST Fall Conference Proceedings, pp. 116-117, 2019.
  11. Department of Defense(DoD), Vehicular Integration for C4ISR/EW Interoperability(VICTORY) Standards, Victory-standards.org, 2010.
  12. Manas Pradhan, et. al., "Integrating Automotive Bus-based Networks in the NATO Generic Vehicle Architecture," Twenty-First International Command and Control Research and Technology Symposium, September 2016.