과제정보
본 논문은 한국생산기술연구원 기관주요사업(KITECH EO-21-0009)과 2021년도 산업통상자원부 및 산업기술평가관리원 (과제번호:20009839) 의 연구비 지원으로 수행한 연구입니다.
참고문헌
- Attar, H., Prashanth, K. G., Chaubey, A. K., Calin, M., Zhang, L. C., Scudino, S. and Eckert, J., "Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes", Materials Letters., Vol. 142, pp. 28-41, 2015.
- Mower, T. M., Long, M. J., "Mechanical behavior of additive manufactured, powder-bed laser-fused materials", Mat. Sci. Eng, A-Struct., Vol. 651, pp. 198-213, 2016. https://doi.org/10.1016/j.msea.2015.10.068
- Mumtaz, K. A., Hopkinson, N., "Selective laser melting of thin wall parts using pulse shaping", Materials Processing Technology, Vol. 210, pp. 279-287, 2010. https://doi.org/10.1016/j.jmatprotec.2009.09.011
- Choi, J. W., Kim, H. C., "3D Printing Technologies - A Review", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 1-8, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.001
- Miranda, G., Faria, S., Bartolomeu, F., Pinto, E., Mederia, S., Mateus, A., Carreira, P., Alves, N., Silva, F. S., Carvalho, O., "Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting", Materials Science and Engineering : A, Vol. 657, pp. 43-56, 2016. https://doi.org/10.1016/j.msea.2016.01.028
- Yadroitsev, I., Smurov, I., "Surface Morphology in Selective Laser Melting of Metal Powders", Physics Procedia, Vol. 12, Part A, pp. 264-270, 2011. https://doi.org/10.1016/j.phpro.2011.03.034
- Kang, M. C., Ye, D. H., Go, G. H., "International Development Trend and Technical Issues of Metal Additive Manufacturing", J. of Welding and Joining, Vol. 34, No. 4, pp. 9-16, 2016. https://doi.org/10.5781/JWJ.2016.34.4.9
- Hu, Z., Zhu, H., Zhang, H., Zeng, X., "Experimental investigation on selective laser melting of 17-4PH stainless steel", Opt. Laser Technology., Vol. 87, pp. 17-25, 2017. https://doi.org/10.1016/j.optlastec.2016.07.012
- Lin, X., Cao, Y., Wu, X., Yang, H., Chen, J., Huang, W., "Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel", Mat. Sci. Eng, A-Struct., Vol. 553, pp. 80-88, 2012. https://doi.org/10.1016/j.msea.2012.05.095
- Carter, L. N., Wang, X., Read, N., Khan, R., Aristizabal, M., Essa, K., Attallah, M. M., "Process optimisation of selective laser melting using energy density model for nickel based superalloys", Materials Science and Technology, Vol. 32, pp. 657-661, 2016. https://doi.org/10.1179/1743284715Y.0000000108
- Simchi, A., Pohl, H., "Effect of laser sintering processing parameters on the microstructure and densification of iron powder", Materials Science and Engineering: A, Vol. 359, pp. 119-228, 2003. https://doi.org/10.1016/S0921-5093(03)00341-1
- Peng, T., Chen, C., "Influence of energy density on energy demand and porosity of 316L stainless steel fabricated by selective laser melting", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 5, pp. 55-62, 2018. https://doi.org/10.1007/s40684-018-0006-9
- Thijs, L., Verhaeghe, F., Craeghs, T., Van Humbeeck, J., Kruth, J.-P., "A Study of the Microstructural Evolution during Selective Laser Melting of Ti-6Al-4V", Acta Materialia, Vol. 58, No. 9, pp. 3303-3312, 2010. https://doi.org/10.1016/j.actamat.2010.02.004
- Zhang, D., Feng, Z., Wang, C., Wang, W., Liu, Z., Niu, Wen., "Comparison of microstructures and mechanical properties of Inconel 718alloy processed by selective laser melting and casting", Materials Science and Engineering : A, Vol. 724, pp. 357-367, 2018. https://doi.org/10.1016/j.msea.2018.03.073
- Kempen, K., Thijs, L., Humbeecke, J., Kruth, J.-P., "Processing AlSi10Mg by Selective Laser Melting: Parameter optimization and material characterization", Vol. 31, pp. 917-923, 2015. https://doi.org/10.1179/1743284714Y.0000000702
- Hong, M. H., Min, B. K., Kwon, T. Y., "The Influence of Process Parameters on the Surface Roughness of a 3D-Printed Co-Cr Dental Alloy Produced via Selective Laser Melting", Applied Sciences., Vol. 6, No. 12, pp. 401-411 2016. https://doi.org/10.3390/app6120401
- Dong, Z., Liu, Y., Wen, W., Ge, J., Liang, J., "Effect of hatch spacing on melt pool and as-built quality during selective laser melting of stainless steel: Modeling and experimental approaches", Materials, Vol. 12, No. 50, 2019.
- Maamoun, AH., Xue YF., Elbestawi, MA., Veldhuis, SC., "The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys", Materials, Vol. 12, No. 12, 2019.
- Li, R., Liu, J., Shi, Y., Wang, Li., Jinang, W., "Balling behavior of stainless steel and nickel powder during selective laser melting process", The International Journal of Advanced Manufacturing Technology, Vol. 59, pp. 1025-1035, 2012. https://doi.org/10.1007/s00170-011-3566-1