DOI QR코드

DOI QR Code

토목섬유 봉합효율과 연약지반 허용지지력 현장검증

Seam Efficiency of Geotextile and Verification of Allowable Bearing Capacity of Soft Ground

  • 조대성 (주식회사 지안산업 기술연구소) ;
  • 채유미 (동신대학교 토목환경공학과) ;
  • 김재홍 (동신대학교 토목환경공학과)
  • Cho, Dae-Sung (Technical Institute, Zian. Co. Ltd.) ;
  • Chae, Yu-Mi (Dept. of Civil and Environmental Engrg., Dongshin Univ.) ;
  • Kim, Jae-Hong (Dept. of Civil and Environmental Engrg., Dongshin Univ.)
  • 투고 : 2021.06.17
  • 심사 : 2021.07.05
  • 발행 : 2021.07.31

초록

연약지반으로 이루어진 준설매립부지는 지반이 매우 연약한 상태이기 때문에 설계시 정확한 지지력을 계산하는 것은 어렵고 복잡한 요인들이 고려되어야 한다. 최근까지 준설매립지를 대상으로 다양한 연약지반처리공법을 설계하고 있지만, 초기 장비진입을 위해서 기존 Meyerhof(1974) 복합토층 지지력 계산으로 안전율을 예측하고 있다. 기존 방정식들은 시공성 안전을 확보한다는 차원에서 연약지반 지지력을 과소평가하여 경제적 비용이 증가될 수 있다. 따라서 본 연구에서는 현장여건이 고려된 지지력 식을 제안하였다. 이를 위하여 이론적인 방정식에서 고려되지 못하는 토목섬유의 봉합사 역할과 봉합인장강도가 지지력에 끼치는 영향을 실험으로 제시하여 적절한 연약지반 지지력을 평가할 수 있도록 제시하였다. 그리고, 현장시험으로 수정방정식 지지력의 안정성이 평판재하시험으로 실측한 값과 비교하여 적절성을 확인하였다. 향후 준설토 매립지반의 설계와 시공시 본 연구 결과가 기초자료로 활용될 것으로 판단된다.

Since the dredging reclaimed land consisting of soft ground is very weak in support, the difficult and complex factors should be considered in the design to calculate accurate bearing capacity of soft ground. Recently, various reinforcement construction methods of soft ground have been designed for dredged landfills, but the stabilities are predicted by calculating conventional Meyerhof (1974) equation for trafficability in soft ground. Conventional equations increase economic costs by underestimating bearing capacity of weak ground in order to ensure constructive safety, so a modified equation has been proposed from the literature. The paper attempts to experiment and compute important factors, such as stitching fiber and seam tensile strength of geotextiles, that are not theoretically considered and can be identified in the field. In addition, The evaluation of the bearing capacity of the modified equation is verified to be stable for trafficability through the plate bearing test performed on site.

키워드

과제정보

이 논문은 2020년도 동신대학교 대학원 대학혁신지원사업(DS-콜로키움)에서 지원받았으며, 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(No. 2020R1I1A307511011).

참고문헌

  1. Chae, Y. M. and Kim, J. H. (2020), "Numerical Analysis for Evaluation of Bearing Capacity on Soft Ground with Geotextile", Journal of the Korean Society of Civil Engineers, Vol.40, No.2, pp.217-223. https://doi.org/10.12652/Ksce.2020.40.2.0217
  2. FITI testing & research Institue (2018), Test service by industries, Busan Branch Office.
  3. Kim, S. H., Chae, Y. M., and Kim, J. H. (2019), "Modification of Bearing Capacity Formula Considering Seam Tensile Strength of Geotextile in Soft Ground", Journal of the Korean Geotechnical Society, Vol.35, No.12, pp.59-67 (in Korean).
  4. Korea Agency for Infrastructure Technology Advancement (KAIA) (2018), Development of sealing technology and efficient installation method for increasing joint strength of geotextile in soft ground, R&D Report, 18RDRP-B076564-05, South Korea (in Korean).
  5. Meyerhof, G. G. (1974), "Ultimate Bearing Capacity of Footings on Sand Layer Overlying Clay", Canadian Geotechnical Journal, Vol.11, No.2, pp.224-229.
  6. Quality test standards for construction works (2020), KS K ISO 10319, Guidelines for Quality Management of Construction Works, Notice of Ministry of Land, Infrastructure and Transport, "3.6 Quality test standards". (in Korean)
  7. Yamanouchi, T. (1985), "Recent Development in the Used Synthetic Geofabrics and Geogrids", Symposium on Recent Developments in Ground improvement Techniques, Bangkok, pp.205-224.