DOI QR코드

DOI QR Code

RANS based CFD simulations for urban wind prediction - field verification against MoTUS

  • Lee, Daniel Sang-Hoon (Institute of Architecture and Technology, The Royal Danish Academy, Schools of Architecture, Design and Conservation) ;
  • Mauree, Dasaraden (Solar Energy and Building Physics Laboratory, Ecole polytechnique federale de Lausanne ENAC IIC LESO-PB)
  • Received : 2020.01.09
  • Accepted : 2021.07.05
  • Published : 2021.07.25

Abstract

The current paper presents an investigation, which has its main objective in the verification of outdoor wind flow CFD simulation results (ANSYS® Fluent) with real environment measurements in urban setting. The details of the simulation set-up are discussed in the paper including the inlet boundary conditions, surface roughness parameters and the source/sink terms to represent the effect of trees. The simulation results are compared with the high-resolution on-site wind velocity measurements from the Measurement of Turbulence in an Urban Setup (MoTUS) project of Ecole Polytechnique Federale de Lausanne (EPFL) in Switzerland. Multiple simulations were conducted to evaluate the performance of the model based on different wind direction and speeds. At the end of the current study, the highly consistent and accurate results were observed from all 18 verification cases; with the RMSEs of the simulated wind velocities in range of 0.21 and 0.59 m/s only.

Keywords

References

  1. ANSYS (2017), Fluent Theory Guide, Release 18.1=
  2. ANS YS (2017), Fluent User's Guide, Release 18.1. Canonsburg : ANSYS, Inc.
  3. Antoniou, N., Montazeri, H., Wigo, H., Neophytou, M.K. A., Blocken, B. and Sandberg, M. (2017), "CFD and wind-tunnel analysis of outdoor ventilation in a real compact heterogeneous urban area: Evaluation using "air delay", Build. Environ., 126, 355-372. https://doi.org/10.1016/j.buildenv.2017.10.013.
  4. Bechmann, A., Sorensen, N.N., Johansen, J., Vinther, S., Nielsen, B.S. and Botha, P. (2007), "Hybrid RANS/LES method for high Reynolds numbers, applied to atmospheric flow over complex terrain", J. Phys. Conference Series, 75(1), 012054, IOP Publishing. https://doi.org/10.1088/1742-6596/75/1/012054
  5. Blocken, B., Stathopoulos, T. and Carmeliet, J. (2007), "CFD simulation of the atmospheric boundary layer: wall function problems", Atmosp. Environ., 41(2), 238-252. https://doi.org/10.1016/j.atmosenv.2006.08.019
  6. Burton, T. (2001), Wind Energy Handbook, Wiley. Canonsburg: ANSYS, Inc.
  7. Christen, A., Rotach, M.W. and Vogt, R. (2009), "The budget of turbulent kinetic energy in the urban roughness sublayer", Bound. Lay. Meteorol., 131(2), 193-222. https://doi.org/10.1007/s10546-009-9359-5
  8. Franke, J. (2007), "Best practice guideline for the CFD simulation of flows in the urban environment", Meteorological Inst.
  9. Geneva: World Meteorological Organization (2005), Guide to Meteorological Instruments and Methods of Observation
  10. Gromke, C. and Blocken, B. (2015), "Influence of avenuetrees on air quality at the urban neighborhood scale. Part I: Quality assurance studies and turbulent Schmidt number analysis for RANS CFD simulations", Environ. Pollut., 196, 214-223. https://doi.org/10.1016/j.envpol.2014.10.016.
  11. Guignard, F., Mauree, D., Lovallo, M., Kanevski, M. and Telesca, L. (2019), "Fisher-Shannon complexity analysis of high-frequency urban wind speed time series", Entropy, 21(1), 47. https://doi.org/10.3390/e21010047.
  12. Hargreaves, D.M. and Wright, N.G. (2007), "On the use of the k-ε model in commercial CFD software to model the neutral atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 95(5), 355-369. https://doi.org/10.1016/j.jweia.2006.08.002.
  13. Janssen, W.D., Blocken, B. and van Hooff, T. (2013), "Pedestrian wind comfort around buildings: Comparison of wind comfort criteria based on whole-flow field data for a complex case study", Build. Environ., 59, 547-562. https://doi.org/10.1016/j.buildenv.2012.10.012.
  14. Koutsourakis, N., Bartzis, J.G. and Markatos, N.C. (2012), "Evaluation of Reynolds stress, k-ε and RNG k-ε turbulence models in street canyon flows using various experimental datasets", Environ. Fluid Mech., 12(4), 379-403. https://doi.org/10.1007/s10652-012-9240-9.
  15. Lee, D.S.H. (2017), "Impacts of surrounding building layers in CFD wind simulations", Energy Procedia, 122, 50-55. https://doi.org/10.1016/j.egypro.2017.07.313
  16. Li, B., Liu, J., Luo, F. and Man, X. (2015), "Evaluation of CFD simulation using various turbulence models for wind pressure on buildings based on wind tunnel experiments", Procedia Eng., 121, 2209-2216. https://doi.org/10.1016/j.proeng.2015.09.094.
  17. Liu, S., Pan, W., Zhang, H., Cheng, X., Long, Z. and Chen, Q. (2017), "CFD simulations of wind distribution in an urban community with a full-scale geometrical model", Build. Environ., 117, 11-23. https://doi.org/10.1016/j.buildenv.2017.02.021.
  18. London: Department of the Environment, Transport and the Regions (1998), New Practice Final Report 106 - The Elizabeth Fry Building, Universiyt of East Anglia - Feedback for Designers and Clients.
  19. Mauree, D., Blond, N., Kohler, M. and Clappier, A. (2017), "On the coherence in the boundary layer: Development of a canopy interface model", Front. Earth Sci., 4, 109. https://doi.org/10.3389/feart.2016.00109.
  20. Mauree, D., Lee, D. S.H., Naboni, E., Coccolo, S. and Scartezzini, J.L. (2017), "Localized meteorological variables influence at the early design stage", Energy Procedia, 122, 325-330. https://doi.org/10.1016/j.egypro.2017.07.331.
  21. Ohba, M., Kobayashi, N. and Murakami, S. (1988), "Study on the assessment of environmental wind conditions at ground level in a built-up area-based on long-term measurements using portable 3-cup anemometers", J. Wind Eng. Ind. Aerod., 28(1-3), 129-138. https://doi.org/10.1016/0167-6105(88)90109-2.
  22. Ricci, A., Kalkman, I., Blocken, B., Burlando, M. and Repetto, M.P. (2020), "Impact of turbulence models and roughness height in 3D steady RANS simulations of wind flow in an urban environment", Build. Environ., 171, 106617. https://doi.org/10.1016/j.buildenv.2019.106617.
  23. Tominaga, Y., Akabayashi, S.I., Kitahara, T. and Arinami, Y. (2015), "Air flow around isolated gable-roof buildings with different roof pitches: Wind tunnel experiments and CFD simulations", Build. Environ., 84, 204-213. https://doi.org/10.1016/j.buildenv.2014.11.012.
  24. Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M. and Shirasawa, T. (2008), "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 1749-1761. https://doi.org/10.1016/j.jweia.2008.02.058.
  25. Toparlar, Y., Blocken, B., Vos, P.V., Van Heijst, G.J.F., Janssen, W.D., van Hooff, T. and Timmermans, H.J.P. (2015), "CFD simulation and validation of urban microclimate: A case study for Bergpolder Zuid, Rotterdam", Build. Environ., 83, 79-90. https://doi.org/10.1016/j.buildenv.2014.08.004.
  26. Toren, IB, and E.L. Petersen. (1989), European Wind Atlas, In. Roskilde: Riso National Laboratory.
  27. Van Hooff, T., Blocken, B. and Van Harten, M. (2011), "3D CFD simulations of wind flow and wind-driven rain shelter in sports stadia: influence of stadium geometry", Build. Environ., 46(1), 22-37. https://doi.org/10.1016/j.buildenv.2010.06.013.
  28. Yoshie, R., Mochida, A., Tominaga, Y., Kataoka, H., Harimoto, K., Nozu, T. and Shirasawa, T. (2007), "Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan", J. Wind Eng. Ind. Aerod., 95(9-11), 1551-1578. https://doi.org/10.1016/j.jweia.2007.02.023
  29. Zhang, X. (2009), "CFD simulation of neutral ABL flows", In. Roskilde: Denmarks Tekniske Universitet, Riso Nationallaboratoriet for Bae redygtig Energi.
  30. Zheng, C., Li, Y. and Wu, Y. (2016), "Pedestrian-level wind environment on outdoor platforms of a thousand-meterscale megatall building: Sub-configuration experiment and wind comfort assessment", Build. Environ., 106, 313-326. https://doi.org/10.1016/j.buildenv.2016.07.004