DOI QR코드

DOI QR Code

Flexural performance test of a prestressed concrete beam with plastic bellows

  • Cheng, Xuansheng (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Hong, Junliang (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Ma, Liang (Western Engineering Research Center of Disaster Mitigation in Civil Engineering of Ministry of Education, Lanzhou University of Technology) ;
  • Li, Guoliang (Western Engineering Research Center of Disaster Mitigation in Civil Engineering of Ministry of Education, Lanzhou University of Technology)
  • 투고 : 2020.10.18
  • 심사 : 2021.05.28
  • 발행 : 2021.07.25

초록

The flexural performance of 8 types of prestressed concrete beams with plastic bellows under different grouting compactness is examined in this paper. By applying concentrated load and symmetrical load to 8 types of prestressed concrete test beams with plastic bellows, the flexural performance test of each test beam is carried out, and the mechanical characteristics and failure morphology of each test beam under different grouting compactness are discussed. The influence of duct grouting compactness on the strain of steel bars and concrete, mid-span deflection and stiffness of prestressed concrete beam are analyzed. The results show that the cracking load and ultimate load of the test beam increases constantly with the increase of the duct grouting compactness, and the flexural bearing capacity of prestressed concrete beams has also been significantly improved. After the concrete is cracked, the mid-span deflection of the prestressed concrete beam gradually decreases with the increase of the duct grouting compactness under the same load form and load grade. At the same load grade, the mid-span deflection change of prestressed concrete beams under concentrated load is much larger than that under symmetric load. The ductility coefficient of prestressed concrete beams with plastic bellows decreases as the grouting compactness increases. In engineering practice, the quality of duct grouting compactness about the prestressed concrete beam should be strictly controlled and improved.

키워드

과제정보

This paper is a part of the work of the National Natural Science Foundation of China (Grant number: 51968045), the science and technology projects of the Zhejiang Traffic Quality Supervision Bureau (Grant number: ZJ201602).

참고문헌

  1. Ahmed, A.A., Hassan, M. and Masmoudi, R. (2020), "Effect of concrete strength and tube thickness on the flexural behavior of prestressed rectangular concrete-filled FRP tubes beams", Eng. Struct., 205, 32-41. http://doi.org/10.1016/j.engstruct.2019.110112.
  2. Cao, H., Zheng, X., Hua, J.M. and Hu, Z.M. (2014), "Damage detection of prestressed concrete beams based on nonlinear dynamic characteristics", Eng. Mech., 31(2), 190-194. http://doi.org/10.6052/j.issn.1000-4750.2012.08.0611.
  3. Chen, Y., Feng, R. and Gong, W.Z. (2018), "Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes", Constr. Build. Mater., 165, 173-186. http://doi.org/10.1016/j.conbuildmat.2017.12.104.
  4. Chinese Ccode (2015), Code for Design of Concrete Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
  5. Chinese Code (2011a), Technical Specification for Construction of Highway Bridge and Culvert, Ministry of Transport of the People's Republic of China, Beijing, China.
  6. Chinese Code (2011b), Specification for Mix Proportion Design of Ordinary Concrete, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
  7. Chinese Code (2016), Technical Specification for Concrete Structures Prestressed with Unbonded Tendons, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
  8. De, D.D. and Ricciardi, G. (2020), "A stress field approach for the shear capacity of RC beams with stirrups", Struct. Eng. Mech., 73(5), 515-527. http://doi.org/10.12989/sem.2020.73.5.515.
  9. Du, G.C. (1997), "Application and development of prestressed concrete for buildings in the past 40 years", Chin. Civil Eng. J., 30(1), 3-15. http://doi.org/10.15951/j.tmgcxb.1997.01.001.
  10. Feng, X.W. and Wang, Y. (2012), "Influence of rotating speed on properties of prestressed pore pressure pastes", Chin. Foreign Highw., 32(5), 173-176.
  11. Garcia, J.M., Bonett, R.L., Schultz, A.E., Carrillo, J. and Ledezma, C. (2019), "Flexural behavior of ungrouted post-tensioned concrete masonry beams with unbonded bars", Constr. Build. Mater., 203, 210-221. http://doi.org/10.1016/j.conbuildmat.2018.12.101.
  12. Ji, B.H. and Fu, Z.Q. (2010), "Analysis of chinese bridge collapse accident cause in causes in recent years", Chin. Civil Eng. J., 43(S1), 495-498. http://doi.org/10.15951/j.tmgcxb.2010.s1.010.
  13. Jia, J.Q. and Meng, G. (2015), "Experimental study on flexural behavior of post-tensioning bonded partially prestressed ultrahigh strength concrete beams", J. Harbin Inst. Technol., 22(2), 94-102. http://doi.org/10.11916/j.issn.1005-9113.2015.02.014.
  14. Limongelli, M.P., Siegert, D., Merliot, E. and Waeytens, J. (2016), "Damage detection in a post tensioned concrete beam-Experimental investigation", Eng. Struct., 128, 15-25. https://doi.org/10.1016/j.engstruct.2016.09.017.
  15. Meng, G., Jia, J.Q. and Wang, J.Z. (2013), "Study on flexural behavior of prestressed ultra-high strength concrete beams", J. Harbin Inst. Technol., 34(5), 575-580. http://doi.org/10.3969/j.issn.1006-7043.201210060.
  16. Oh, B.H. and Kim, K.S. (2004), "Shear behavior of full-scale post-tensioned prestressed concrete bridge girders", ACI Struct. J., 101(2), 176-182. http://doi.org/10.1007/BF02481619.
  17. Ortega, N.F., Moro, J.M. and Meneses, R.S. (2018), "Theoretical model to determine bond loss in prestressed concrete with reinforcement corrosion", Struct. Eng. Mech., 65(1), 1-7. http://doi.org/10.12989/sem.2018.65.1.001.
  18. Park, H., Jeong, S., Lee, S.C. and Cho, J.Y. (2016), "Flexural behavior of post-tensioned prestressed concrete girders with high-strength strands", Eng. Struct., 112, 90-99. https://doi.org/10.1016/j.engstruct.2016.01.004.
  19. Su, J., Sun, Z.G., Yi, N.G., Zhang, A.G. and Bai, Y. (2013), "Experimental study on seismic performance of unbonded and bonded prestressed concrete beams", Eng. Mech., 30(5), 69-74. http://doi.org/10.4028/www.scientific.net/AMM.178-181.2387.
  20. Wang, T.W. (2013), Structural Test of Civil Engineering, Wuhan University of Technology Press, Wuhan, Hubei, China.
  21. Wang, W.D. and Han, L.H. (2008), "Research on practical resilience model of load versus displacement for concrete filled steel tubular frame", Eng. Mech., 25(11), 62-69. http://doi.org/10.1016/S1872-5791(08)60058-5.
  22. Wei, Y.K. (2014), "Feature study of elastic wave's attribute for the groutingcompactness of the prestressed channel", Master Thesis, Dissertation, Chongqing Jiaotong University, Chongqing.
  23. Woodward, R.J. (1981), Conditions within Ducts in Post-tensioned Prestressed Concrete Bridges, Publication of Transport & Road Research Laboratory, Wokingham, Berkshire, UK.
  24. Xie, T.Y. and Ozbakkaloglu, T. (2016) "Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes", Constr. Build. Mater., 105, 132-143. http://doi.org/10.1016/j.conbuildmat.2015.12.068.
  25. Yao, D.L., Jia, J.Q. and Yu, F. (2013), "Analysis on shear ductility of prestressed ultra-high reinforced concrete beams", J. Harbin Eng. Univ., 34(5), 593-598. http://doi.org/10.3969/j.issn.1006-7043.201209015.
  26. Zhang, K.X. and Sun, Q.S. (2018), "Experimental study of reinforced concrete T-beams strengthened with a composite of prestressed steel wire ropes embedded in polyurethane cement (PSWR-PUC)", Int. J. Civil Eng., 16(9), 1109-1123. http://doi.org/10.1007/s40999-017-0264-x.
  27. Zhang, W.Y. (2015), "Study on the testing evaluation technology system of prestressed duct grouting compactness", J. Sichuan Univ. Sci. Eng. (Nat. Sci. Ed.), 28(1), 46-49. http://doi.org/10.11863/j.suse.2015.01.11.
  28. Zhang, Y.T., Zhang, J. and Yang, L. (2017), "Research on the effects of prestressing ratio on the seismic capacity of prestressed concrete frame structures", Eng. Mech., 34(2), 129-136. http://doi.org/10.6052/j.issn.1000-4750.2015.07.0580.
  29. Zhou, J.M., Pan, X.H. and Zhang, F. (2013), "Experimental study on seismic performance of post-tensioned prestressed concrete beams reinforced with 500MPa rebars", Chin. Civil Eng. J., 46(5), 39-49.
  30. Zhou, Q. and Zhang, X.C. (2015), "Static load test and numerical analysis of post-tensioning pre-stressed concrete bridge", J. Wuhan Univ. Tech., 37(2), 112-115. http://doi.org/10.3963/j.issn.1671-4431.2015.02.021
  31. Zhou, W. and Zheng, W.Z. (2012), "Analysis of ultimate load-capacity for reinforced gradient concrete beams consisting of normal and high strength concrete", J. Harbin Inst. Technol., 44(2), 17-22.
  32. Zhu, E.Y. (2012), Modern Prestressed Bridge Structure, Tsinghua University Press, Beijing, China.