과제정보
This work is supported by the National Natural Science Foundation of China (51904167, 51474134 & 51774194 & 52004143), Research Fund of the State Key Laboratory of Coal Resources and Safe Mining, CUMT (SKLCRSM19KF008), Taishan Scholars Project, Taishan Scholar Talent Team Support Plan for Advantaged & Unique Discipline Areas, Natural Science Foundation of Chongqing, China (cstc2019jcyj-bsh0041), Postdoctoral Science Foundation Project Funded by State Key Laboratory of Coal Mine Disaster Dynamics and Control (2011DA105287-BH201903), Key R&D plan of Shandong Province (2019SDZY034-2) and China Postdoctoral Science Foundation (2020M670781). We thank anonymous reviewers for their comments and suggestions to improve the manuscripts.
참고문헌
- Alehossein, H., Poulsen, B.A. (2010), "Stress analysis of longwall top coal caving", Int. J. Rock Mech. Min. Sci., 47(1), 30-41. https://doi.org/10.1016/j.ijrmms.2009.07.004.
- Bacciocchi, M., Fantuzzi, N. and Ferreira, A. (2020), "Conforming and nonconforming laminated finite element Kirchhoff nanoplates in bending using strain gradient theory", Comput. Struct., 239, 106322. https://doi.org/10.1016/j.compstruc.2020.106322.
- Brunton, I.D., Fraser, S.J. and Hodgkinson, J.H. (2010), "Parameters influencing full scale sublevel caving material recovery at the Ridgeway gold mine", Int. J. Rock Mech. Min. Sci., 47(4), 647-656. https://doi.org/10.1016/j.ijrmms.2009.12.011.
- Cheng, W., Xie, J. and Wang, G. (2009), "Comparison of strata movement between section and slicing of top coal mining in steep and thick seams", J. China Coal Soc., 34, 478-481. https://doi.org/10.13225/j.cnki.jccs.2009.04.009.
- Choi, S.O. and Lee, S.J. (2015), "Three dimensional numerical analysis of the rock cutting behavior of a disc cutter using particle flow code", KSCE J. Civ. Eng., 19(4), 1129-1138. https://doi.org/10.1007/s12205-013-0622-4.
- Deng, X., Zhang, J. and Kang, T. (2016), "Strata behavior in extra1. thick coal seam mining with upward slicing backfilling technology", Int. J. Min. Sci. Technol., 26, 587-592. https://doi.org/10.1016/j.ijmst.2016.05.009.
- Jena, S.K., Lokhande, R.D. and Manoj, P. (2016), "Analysis of strata controll monitoring in rground coal mine for apprehension of strata movement", Recent Adv. Rock Eng. https://doi.org/10.2991/rare-16.2016.81.
- Konicek, P., Soucek, K. and Stas, L. (2013), "Long-hole destress blasting for rockburst control during deep underground coal mining", Int. J. Rock Mech. Min. Sci., 61(7), 141-153. https://doi.org/10.1016/j.ijrmms.2013.02.001.
- Kong, X.G., Li, S.G. and Wang, E.Y. (2021) "Dynamics behaviour of gas-bearing coal subjected to SHPB tests", Compos. Struct., 256, 113088. https://doi.org/10.1016/j.compstruct.2020.113088.
- Latifi, M., Kharazi, M. and Ovesy, H.R. (2016), "Nonlinear dynamic response of symmetric laminated composite beams under combined in-plane and lateral loadings using full layerwise theory", Thin-Walled Struct., 104, 62-70. https://doi.org/10.1016/j.tws.2016.03.006.
- Lazopoulos, K.A. (2009), "On bending of strain gradient elastic micro-plates", Mech. Res. Commun., 36, 777-783. https://doi.org/10.1016/j.mechrescom.2009.05.005.
- Leniak, A., Led, E. and Mirek, K. (2020), "Detailed recognition of seismogenic structures activated during underground coal mining: A case study from Bobrek Mine, Poland", Energies, 13(18), 1-16. https://doi.org/10.3390/en13184622.
- Li, X.L., Cao, Z.Y. and Xu, Y.L. (2020), "Characteristics and trends of coal mine safety development", Energy Sources Part ARecovery Util. Environ. Eff., 1-19. https://doi.org/10.1080/15567036.2020.1852339.
- Li, X.L., Chen, S.J., Li, Z.H. and Wang, E.Y. (2021), "Rockburst mechanism in coal rock with structural surface and the microseismic (MS) and electromagnetic radiation (EMR) response", Eng. Fail. Anal., 124(6), 105396. https://doi.org/10.1016/j.engfailanal.2021.105396.
- Liu, S.M., Li, X.L. and Wang, D.K. (2021), "Experimental study on temperature response of different ranks of coal to liquid nitrogen soaking", Nat. Resour. Res., 32(2), 1467-1480. https://doi.org/10.1007/s11053-020-09768-3
- Lomax, D.R., Massare, J.A. and Evans, M. (2019), "New information on the skull roof of Protoichthyosaurus (Reptilia: Ichthyosauria) and intraspecific variation in some dermal skull elements" Geol. Mag., 157(4), 1-11. https://doi.org/10.1017/S0016756819001225.
- Lydzba, D., Rozanski, A. and Sevostianov, I. (2019), "Principle of equivalent microstructure in micromechanics and its connection with the replacement relations. Thermal conductivity problem", Int. J. Eng. Sci., 144(11), 103126. https://doi.org/10.1016/j.ijengsci.2019.103126.
- Mahdevari, S. (2021), "Prediction of tailgate stability in mechanized longwall mines using an improved support vector regression model", Arab. J. Geosci., 14(3), 216. https://doi.org/10.1007/s12517-021-06598-2.
- Meggiolaro, M.A., Wu, H. and Castro, J.D. (2015), "Non-proportional hardening models for predicting mean and peak stress evolution in multiaxial fatigue using Tanaka's incremental plasticity concepts", Int. J. Fatigue, 82(1), 146-157. https://doi.org/10.1016/j.ijfatigue.2015.07.027.
- Meneghetti, G. and Campagnolo, A. (2020), "State-of-the-art review of peak stress method for fatigue strength assessment of welded joints", Int. J. Fatigue, 139(10), 105705. https://doi.org/10.1016/j.ijfatigue.2020.105705.
- Najafi, M., Jalali, S.E. and Bafghi, A. (2011), "Prediction of the confidence interval for stability analysis of chain pillars in coal mines", Safety Sci., 49(5), 651-657. https://doi.org/10.1016/j.ssci.2010.11.005.
- Parmar, H., Yarahmadi Bafghi, A. and Najafi, M. (2019), "Impact of ground surface subsidence due to underground mining on surface infrastructure: the case of the Anomaly No. 12 Sechahun, Iran", Environ Earth Sci., 78, 409. https://doi.org/10.1007/s12665-019-8424-8.
- Rezaei, M., Hossaini, M.F. and Majdi, A. (2015), "Determination of longwall mining-induced stress using the strain energy method", Rock Mech. Rock Eng., 48(6), 2421-2433. https://doi.org/10.1007/s00603-014-0704-8.
- Singh, A.K., Singh, R. and Mandal, P.K. (2002), "Inclined slicing of a thick coal seam in ascending order-A case study", CIM Bull., 95, 124-128. https://doi.org/10.1179/000705902225002394.
- Smart, B.G.D. and Haley, S.M. (1987), "Further development of the roof strata tilt concept for pack design and the estimation of stress development in a caved waste", Min. Sci. Technol., 5, 121-130. https://doi.org/10.1016/S0167-9031(87)90355-0.
- Stockmann, M., Hirsch, D. and Lippmann-Pipke, J. (2013), "Geochemical study of different-aged mining dump materials in the Freiberg mining district, Germany", Environ. Earth Sci., 68(4), 1153-1168. https://doi.org/1153-1168.10.1007/s12665-012-1817-6.
- Varela, A.A., Sandoval-Alban and Muoz, M. (2021), "Evaluation of green roof structures and substrates for Lactuca sativa L. in tropical conditions", Urban Forestry Urban Green, 60(5), 127063. https://doi.org/10.1016/j.ufug.2021.127063.
- Wang, S. and Wang, Z. (2013), "Analysis of separation and dislocation characteristics of layered roof in the mined-out areas", Appl. Mech. Mater., 6, 256-259. https://doi.org/10.4028/www.scientific.net/AMM.256-259.75.
- Cao, W., Durucan, S., Cai, W., Shi, J.Q. and Korre, A. (2020), "A physics-based probabilistic forecasting methodology for hazardous microseismicity associated with longwall coal mining", Int. J. Coal Geol., 232(12), 103627. https://doi.org/10.1016/j.coal.2020.103627.
- Wilson, A.H. (1983), "Stress and stability in coal ribsides and pillars: Proc 1st Conference on Ground Control in Mining, Morgantown, 27-29 July 1981, Pl-12. Publ Morgantown: West Virginia University, 1981", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 20, A17. https://doi.org/10.1016/0148-9062(83)91760-6.
- Xue, Y.C., Sun, W.B. and Wu, Q.S. (2020), "The influence of magmatic rock thickness on fracture and instability law of mining surrounding rock", Geomech. Eng., 20(6), 547-556. https://doi.org/10.12989/gae.2020.20.6.547.
- Zhang, N.B., Liu, C.Y. and Yang, P.J. (2016), "Flow of top coal and roof rock and loss of top coal in fully mechanized top coal caving mining of extra thick coal seams", Arab. J. Geosci., 9(6), 1-9. https://doi.org/10.1007/s12517-016-2493-8.
- Zhang, Z.B., Liu, X.N. and Zhang, Y.H. (2021a) "Comparative study on fracture characteristics of coal and rock samples based on acoustic emission technology", Theor. Appl. Fract. Mech., 111(2), 102851. https://doi.org/10.1016/j.tafmec.2020.102851.
- Zhang, Z.B., Wang, E.Y. and Liu, X.N. (2021b) "Anisotropic characteristics of ultrasonic transmission velocities and stress inversion during uniaxial compression process", J. Appl. Geophys., 186, 104274. https://doi.org/10.1016/j.jappgeo.2021.104274.
- Zou, Q.L., Lin, B.Q. and Zheng, C.S. (2015) "Novel integrated techniques of drilling-slotting-separation-sealing for enhanced coal bed methane recovery in underground coal mines", J. Nat. Gas Sci. Eng., 26, 960-973. https://doi.org/10.1016/j.jngse.2015.07.033.
- Zou, Q.L., Liu, H., Jiang, Z.B. and Wu, X.A. (2021) "Gas flow laws in coal subjected to hydraulic slotting and a prediction model for its permeability-enhancing effect", Energy Sources Part A Recovery Util. Environ. Effect. https://doi.org/10.1080/15567036.2021.1936692.
피인용 문헌
- Desorption Characterization of Methane in Coal with Different Moisture Contents and Its Influence on Outburst Prediction vol.2021, 2021, https://doi.org/10.1155/2021/6797786
- Characteristics of Airflow Migration in Goafs under the Roof-Cutting and Pressure-Releasing Mode and the Traditional Longwall Mining Mode vol.6, pp.35, 2021, https://doi.org/10.1021/acsomega.1c03711
- Experimental Study on the Mechanical Behavior of Coal Samples during Water Saturation vol.6, pp.49, 2021, https://doi.org/10.1021/acsomega.1c05077
- Experimental Research on the Influence of Microwave Radiation on Coal Permeability and Microstructure vol.6, pp.50, 2021, https://doi.org/10.1021/acsomega.1c04291