DOI QR코드

DOI QR Code

Interfacial behavior of segmental concrete-filled Basalt FRP tube under cyclic loading

  • Sun, Yuehan (Department of Bridge Engineering, Southwest Jiaotong University) ;
  • Deng, Kailai (Department of Bridge Engineering, Southwest Jiaotong University) ;
  • Zhan, Yulin (Department of Bridge Engineering, Southwest Jiaotong University) ;
  • Huang, Wenfeng (Department of Bridge Engineering, Southwest Jiaotong University) ;
  • Yin, Chao (Department of Bridge Engineering, Southwest Jiaotong University)
  • 투고 : 2021.02.04
  • 심사 : 2021.06.11
  • 발행 : 2021.07.10

초록

A segmental concrete-filled basalt fiber-reinforced polymer (BFRP) tube was proposed, whose lightweight characteristic promoted convenient bridge column transportation and construction. A special connecting component between the adjacent BFRP segments ensured effective transfer of sectional forces. Four specimens, including three segmental specimens and one comparative integral concrete-filled BFRP tube, were tested to investigate the mechanical performance of the BFRP tube under cyclic loading. Damage patterns, load-deformation response, and strain development were observed, showing that the segmental concrete-filled BFRP tube presented satisfactory load-carrying and deformation capacities. Further, the connecting component effectively guaranteed a satisfactory hysteretic performance. Based on the test results, the overall load-carrying capacity was mainly determined by the moment resistance of the interface. Furthermore, the segmental structure weakened the confining effect on the core concrete, though applying multiple stirrups could compensate for the reduced confining effect. Finally, design methods were proposed for the connecting component.

키워드

과제정보

The research described in this paper was financially supported by The National Key Research and Development Program of China (No. 2016YFB1200401), The National Natural Science Foundation of China (Nos. 52078436 and 51878564), Supported by Sichuan Science and Technology Program (Grant 2021JDTD0012) and Supported by Sichuan Science and Technology Program (Grant 20GJHZ0183).

참고문헌

  1. Berradia, M. and Kassoul, A. (2018), "Ultimate strength and strain models proposed for cfrp confined concrete cylinders", Steel Compos. Struct., 29(4), 465-481. https://doi.org/10.12989/scs.2018.29.4.465.
  2. Cai, Z.K., Wang, Z. and Yang, T.Y. (2019), "Cyclic load tests on precast segmental bridge columns with both steel and basalt frp reinforcement", J. Compos. Constr., 23(3), 4019014. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000944.
  3. Cao, S., Wu, C. and Wang, W. (2020), "Behavior of frp confined uhpfrc-filled steel tube columns under axial compressive loading", J. Build. Eng., 32. https://doi.org/10.1016/j.jobe.2020.101511.
  4. Dawood, H., ElGawady, M. and Hewes, J. (2012), "Behavior of segmental precast posttensioned bridge piers under lateral loads", J. Bridge Eng., 17(5), 735-746. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000252.
  5. Deng, K., Pan, P., Shen, S., Wang, H. and Feng, P. (2018), "Experimental study of FRP-reinforced slotted RC shear walls under cyclic loading", J. Compos. Constr., 22(4), 04018017. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000855.
  6. ElGawady, M.A. and Dawood, H.M. (2012), "Analysis of segmental piers consisted of concrete filled FRP tubes", Eng. Struct., 38, 142-152. https://doi.org/10.1016/j.engstruct.2012.01.001.
  7. ElGawady, M.A. and Sha'lan, A. (2011), "Seismic behavior of self-centering precast segmental bridge bents", J. Bridge Eng., 16(3), 328-339. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000174.
  8. Gunaslan, S.E., Karasin, A. and Oncu, M.E. (2014), "Properties of FRP materials for strengthening", Int. J. Innov. Sci. Eng. Technol., 1(9), 656-660. https://www.researchgate.net/publication/276202652_Properties_of_FRP_Materials_for_Strengthening.
  9. Gupta, M.K. and Srivastava, R.K. (2016). "Mechanical properties of hybrid fibers-reinforced polymer composite: A review", Polymer-Plast. Technol. Eng., 55(6), 626-642. https://doi.org/10.1080/03602559.2015.1098694. https://doi.org/10.1016/j.compstruct.2020.112094
  10. Ilki, A., Peker, O., Karamuk, E., Demir, C. and Kumbasar, N. (2008), "FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns", J. Mater. Civil Eng., 20(2), 169-188. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:2(169).
  11. Jiang, K., Han, Q., Bai, Y. and Du, X. (2020), "Data-driven ultimate conditions prediction and stress-strain model for frp-confined concrete", Compos. Struct., 242, 112094. https://doi.org/10.1016/j.compstruct.2020.112094
  12. Khan, Q.S., Sheikh, M.N. and Hadi, M.N.S. (2019), "Experimental and analytical investigations of cfft columns with and without frp bars under concentric compression", Steel Compos. Struct., 30(6), 591-601. https://doi.org/10.12989/scs.2019.30.6.591.
  13. Liang, J., Zhang, G., Wang, J. and Hu, M. (2019), "Mechanical behaviour of partially encased composite columns confined by cfrp under axial compression", Steel Compos. Struct., 31(2), 125-131. https://doi.org/10.12989/scs.2019.31.2.125.
  14. Mohamed, H.M. and Masmoudi, R. (2010), "Axial load capacity of concrete-filled FRP tube columns: Experimental versus theoretical predictions", J. Compos. Constr., 14(2), 231-243. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000066.
  15. Ozbakkaloglu, T. and Akin, E. (2012), "Behavior of FRP-confined normal-and high-strength concrete under cyclic axial compression", J. Compos. Constr., 16(4), 451-463. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000273.
  16. Sathishkumar, T.P., Naveen, J.A. and Satheeshkumar, S. (2014), "Hybrid fiber reinforced polymer composites-a review", J. Reinf. Plast. Comp., 33(5), 454-471. https://doi.org/10.1177/0731684413516393.
  17. Shao, Y. and Mirmiran, A. (2005), "Experimental investigation of cyclic behavior of concrete-filled fiber reinforced polymer tubes", J. Compos. Constr., 9(3), 263-273. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:3(263).
  18. Valente, M. (2013), "Seismic Upgrading Strategies for Non-Ductile Plan-Wise Irregular R/C Structures", Procedia Eng., 54, 539-553 https://doi.org/10.1016/j.proeng.2013.03.049.
  19. Valente, M. and Milani G. (2018), "Alternative retrofitting strategies to prevent the failure of an under-designed reinforced concrete frame", Eng. Fail. Anal., 89, 271-285. https://doi.org/10.1016/j.engfailanal.2018.02.001.
  20. Van Den Einde, L., Zhao, L. and Seible, F. (2003), "Use of FRP composites in civil structural applications", Constr. Build. Mater., 17(6-7), 389-403. https://doi.org/10.1016/S0950-0618(03)00040-0.
  21. Wang, Y., Chen, G., Wan, B., Han, B. and Ran, J. (2020), "Axial compressive behavior and confinement mechanism of circular frp-steel tubed concrete stub columns", Compos. Struct., 256. https://doi.org/10.1016/j.compstruct.2020.113082.
  22. Xie, T. and Ozbakkaloglu, T. (2016), "Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes", Constr. Build. Mater., 105, 132-143. https://doi.org/10.1016/j.conbuildmat.2015.12.068.
  23. Yan, L. and Chouw, N. (2014), "Natural FRP tube confined fibre reinforced concrete under pure axial compression: A comparison with glass/carbon FRP", Thin-Wall. Struct., 82, 159-169. https://doi.org/10.1016/j.tws.2014.04.013.
  24. Zhang, B., Yu, T. and Teng, J.G. (2015), "Behavior of concrete-filled FRP tubes under cyclic axial compression", J. Composites Constr., 19(3), 04014060. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000523.