DOI QR코드

DOI QR Code

Finite element modelling of aluminum alloy plated reinforced concrete beams

  • Abuodeh, Omar R. (Glenn Department of Civil Engineering, Clemson University) ;
  • Hawileh, Rami A. (Department of Civil Engineering, American University of Sharjah) ;
  • Abdalla, Jamal A. (Department of Civil Engineering, American University of Sharjah)
  • 투고 : 2020.03.17
  • 심사 : 2021.05.11
  • 발행 : 2021.06.25

초록

This study presents a nonlinear finite element (FE) model development of reinforced concrete (RC) beams externally strengthened with aluminum alloy (AA) plates. The aim of this numerical study was to elucidate the effects of different anchorage schemes on the capacity, ductility, and failure mode of AA plate strengthened beams reported in a published test. Three FE models were developed; namely, a reference RC beam, a beam externally bonded (EB) with an AA plate, and a beam EB with an AA plate with carbon fiber reinforced polymers (CFRP) U-wraps at the plate's end. Validation of the developed FE models was carried out by comparing their load-deflection plots, maximum attained loads, deflections at failure, and failure modes with those reported during the test. The results of each FE model yielded an absolute percentage error less than 5%. Moreover, premature failure modes like end-plate and intermediate crack debonding were simulated and closely agreed with those observed during the test. Finally, the validated models were used to employ a parametric study comprising of twelve beams varying in size of steel reinforcement, presence of AA plates, and end-anchorage. It was concluded that the developed FE models could serve as a design platform for assisting structural engineers during flexural retrofit applications using AA plates.

키워드

과제정보

The support for the research presented in this paper had been provided by Riad Sadek Endowed Chair in Civil Engineering at the American University of Sharjah. The support is gratefully appreciated and acknowledged. The views and conclusion, expressed or implied, in this study are those of the authors and should not be interpreted as those of the donor or the institution.

참고문헌

  1. Abdalla, J.A., Abu-Obeidah, A. and Hawileh, R.A. (2011), "Behaviour of shear deficient reinforced concrete beams with externally bonded aluminum alloy plates", The 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11), Seoul, Korea, September.
  2. Aboutaha, S.P.R. (2005), "Finite element modeling methodologies for FRP strengthened RC members", Comput. Concrete, 2(5), 389-409. https://doi.org/10.12989/cac.2005.2.5.389.
  3. Abu-Obeidah, A., Hawileh, R.A. and Abdalla, J.A. (2015), "Finite element modeling of shear deficient beams bonded with aluminum plates", Proceedings of the 11th International Conference on Computational Structures Technology, Stirlingshire, Scotland.
  4. Abu-Obeidah, A., Hawileh, R.A. and Abdalla, J.A. (2015), "Finite element analysis of strengthened RC beams in shear with aluminum plates", Comput. Struct., 147(15), 36-46. https://doi.org/10.1016/j.compstruc.2014.10.009.
  5. Abuodeh, O.R., Abdalla, J.A. and Hawileh, R.A. (2021), "Flexural strengthening of RC beams using aluminum alloy plates with mechanically-fastened anchorage systems: An experimental investigation", Eng. Struct., 234, 111969. https://doi.org/10.1016/j.engstruct.2021.111969.
  6. Abuodeh, O.R., Alrifai, M., Hawileh, R.A. and Abdalla, J.A. (2019), "Finite element modelling of aluminum alloy plated beams", 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO'19), Manama, Bahrain.
  7. ACI 318 (2019), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute; Farmington Hills, MI, USA.
  8. Al-Sammari, A.T. and Brena, S.F. (2018), "Finite element simulation and parametric study of anchored fiber-reinforced polymer sheets", ACI Struct. J., 115(2), 365-377. https://doi.org/10.14359/51701094
  9. Al-Tamimi, A.K., Hawileh, R.A., Abdalla, J.A. and Rasheed, H.A. (2011), "Effects of ratio of CFRP plate length to shear span and end anchorage on flexural behavior of SCC RC beams", J. Compos. Constr., 15(6), 908-919. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000221.
  10. Ali, A., Abdalla, J.A., Hawileh, R.A. and Galal, K. (2014), "CFRP mechanical anchorage for externally strengthened RC beams under flexure", Phys. Procedia, 10-16. https://doi.org/10.1016/j.phpro.2014.07.002.
  11. Ali, Y.A.Z. (2018), "Flexural behavior of FRP strengthened concrete-wood composite beams", Ain Shams Eng. J., 9(4), 3419-3424. https://doi.org/10.1016/j.asej.2018.06.003.
  12. Alkhalil, J. and El-Maaddawy, T.A. (2017), "Finite element modelling and testing of two-span concrete slab strips strengthened by externally-bonded composites and mechanical anchors", Eng. Struct., 147(15), 45-61. https://doi.org/10.1016/j.engstruct.2017.05.040.
  13. Amran, Y.M., Alyousef, R., Rashid, R.S.M., Alabduljabbar, H. and Hung, C. (2018), "Properties and applications of FRP in strengthening RC structures: A review", Struct., 16, 208-238. https://doi.org/10.1016/j.istruc.2018.09.008.
  14. ANSYS Academic Research (2019), Mechanical, Mechanical APDL Documentation, ANSYS Inc.
  15. Chen, W., Pham, T.M., Sichembe, H., Chen, L. and Hong, H. (2018), "Experimental study of flexural behaviour of RC beams strengthened by longitudinal and U-shaped basalt FRP sheet", Compos. Part B: Eng., 134(1), 114-126. https://doi.org/10.1016/j.compositesb.2017.09.053.
  16. Fu, B., Teng, J., Chen, G., Chen, J.F. and Guo, Y.C. (2018), "Effect of load distribution on IC debonding in FRP strengthened RC beams: Full-scale experiments", Compos. Struct., 188(15), 483-496. https://doi.org/10.1016/j.compstruct.2018.01.026.
  17. Gamino, A.L., Bittencourt, T.N. and Sousa, J.L.A.O. (2009), "Finite element computational modeling of externally bonded CFRP composites flexural behavior in RC beams", Comput. Concrete, 6(3), 187-202. https://doi.org/10.12989/cac.2009.6.3.187.
  18. Hawileh, R.A. and Abdalla, J.A. (2015), "Modeling of the shear strength of concrete beams reinforced with CFRP bars under unsymmetrical loading", Proceedings of the Fourteenth International Conference on Civil, Structural and Environmental Engineering Computing, Stirlingshire, Scotland.
  19. Hawileh, R.A., Abdalla, J.A. and Al-Tamimi, A.K. (2011), "Flexural performance of strengthened RC beams with CFRP laminates subjected to cyclic loading", Key Eng. Mater., 471, 697-702. https://doi.org/10.4028/www.scientific.net/KEM.471-472.697.
  20. Hawileh, R.A., Abdalla, J.A. and Tanarslan, M. (2009), "Nonlinear finite element analysis of RC T-beams with side bonded CFRP subjected to cyclic loading", The First International Conference on Computational Technologies in Concrete Structures, Jeju, Korea.
  21. Hawileh, R.A., Abdalla, J.A., Naser, M.Z. and Tanarslan, M. (2015), "Finite element modeling of shear deficient RC beams strengthened with NSM CFRP rods under cyclic loading", Spec. Publ., 301, 1-18.
  22. Hawileh, R.A., El-Maaddawy, T.A. and Naser, M.Z. (2012), "Nonlinear finite element modeling of concrete deep beams with openings strengthened with externally-bonded composites", Mater. Des., 42, 378-387. https://doi.org/10.1016/j.matdes.2012.06.004.
  23. Hawileh, R.A., Naser, M.Z. and Abdalla, J.A. (2013), "Finite element simulation of reinforced concrete beams externally strengthened with short-length CFRP plates", Compos. Part B: Eng., 45(1), 1722-1730. https://doi.org/10.1016/j.compositesb.2012.09.032.
  24. Hawileh, R.A., Naser, M.Z., Zaidan, W. and Rasheed, H.A. (2009), "Modeling of insulated CFRP-strengthened reinforced concrete T-beam exposed to fire", Eng. Struct., 31(12), 3072-3079. https://doi.org/10.1016/j.engstruct.2009.08.008.
  25. Hawileh, R.A., Nawaz, W. and Abdalla, J.A. (2018), "Flexural behavior of reinforced concrete beams externally strengthened with hardwire steel-fiber sheets", Constr. Build. Mater., 172(30), 562-573. https://doi.org/10.1016/j.conbuildmat.2018.03.225.
  26. Hawileh, R.A., Rasheed, H.A., Abdalla, J.A. and Al-Tamimi, A.K. (2014), "Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems", Mater. Des., 26(1), 972-982. https://doi.org/10.1016/j.matdes.2013.07.087.
  27. Hognestad, E., Hlanson, N. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", ACI J. Proc., 52(12), 455-479.
  28. Karam, E.C., Hawileh, R.A., El Maaddawy, T. and Abdalla, J.A. (2017), "Experimental investigations of repair of pre-damaged steel-concrete composite beams using CFRP laminates and mechanical anchors", Thin Wall. Struct., 112, 107-117. https://doi.org/10.1016/j.tws.2016.12.024.
  29. Kashi, A., Ramezanianpour, A.A. and Moodi, F. (2017), "Experimental study on durability of strengthened corroded RC columns with FRP sheets in tidal zone of marine environment", Comput. Concrete, 19, 339-346. https://doi.org/10.12989/cac.2017.19.4.339.
  30. Kaya, M. and Yaman, C. (2018), "Modelling the reinforced concrete beams strengthened with GFRP against shear crack", Comput. Concrete, 21(2), 121-137. https://doi.org/10.12989/cac.2018.21.2.127.
  31. Lu, X., Teng, J., Ye, L.P. and Jiang, J.J. (2005), "Bond-slip models for FRP sheets/plates bonded to concrete", Eng. Struct., 27(6), 920-937. https://doi.org/10.1016/j.engstruct.2005.01.014.
  32. Rasheed, H.A., Abdalla, J.A., Hawileh, R.A. and Al-Tamimi, A.K. (2017), "Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates", Eng. Struct., 147(15), 473-485. https://doi.org/10.1016/j.engstruct.2017.05.067.
  33. Salama, A., Hawileh, R.A. and Abdalla, J.A. (2019), "Performance of externally strengthened RC beams with side-bonded CFRP sheets", Compos. Struct., 212(15), 281-290. https://doi.org/10.1016/j.compstruct.2019.01.045.
  34. Shrestha, R., Smith, S.T. and Samali, B. (2013), "Finite element modelling of FRP-strengthened RC beam-column connections with ANSYS", Comput. Concrete, 11(1), 1-20. https://doi.org/10.12989/cac.2013.11.1.001.
  35. Siddika, A., Al Mamun, M.A., Alyousef, R. and Amran, Y.H.M. (2019), "Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A review", J. Build. Eng., 25, 100798. https://doi.org/10.1016/j.jobe.2019.100798.
  36. Willam, K.J. and Warnke, E.D. (1975), "Constitutive model for the triaxial behavior of concrete", Proc. Int. Association for Bridge and Structural Engineering, Bergamo, Italy.
  37. Zhang, D., Wang, Q. and Dong, J. (2016), "Simulation study on CFRP strengthened reinforced concrete beam under four-point bending", Comput. Concrete, 17, 407-421. http://dx.doi.org/10.12989/cac.2016.17.3.407.
  38. Zhang, D., Zhao, Y., Jin, W., Ueda, T. and Nakai, H. (2017), "Shear strengthening of corroded reinforced concrete columns using pet fiber based composites", Eng. Struct., 153, 757-765. https://doi.org/10.1016/j.engstruct.2017.09.030.