과제정보
This paper was supported by Wonkwang Health Science University in 2021 (No. 2021017).
참고문헌
- Kim WS, Kim KB. Evaluation of validity of edentulous digital model for complete denture fabrication. J Dent Hyg Sci. 2015;15:393-398. https://doi.org/10.17135/jdhs.2015.15.4.393
- Kim DY, Park JY, Bae SY, Kang HW, Kim JH, Kim WC. Evaluation of fitness according to application of glass fiber reinforcement for lower jaw complete denture. J Technol Dent. 2018;40:201-207.
- Chae SY, Vang MS. Dimensional stability and surface morphology of various denture resins. J Korean Acad Prosthodont. 1992;30:401-410.
- Anadioti E, Musharbash L, Blatz MB, Papavasiliou G, Kamposiora P. 3D printed complete removable dental prostheses: a narrative review. BMC Oral Health. 2020;20:343. https://doi.org/10.1186/s12903-020-01328-8
- Jung Y, Lee J, Hong SJ, Noh K, Kim HS, Pae A. Fabrication of complete dentures by conventional method and CAD/CAM milling: a case report. J Korean Acad Prosthodont. 2019;57:296-303. https://doi.org/10.4047/jkap.2019.57.3.296
- Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res. 2018;62:56-64. https://doi.org/10.1016/j.jpor.2017.05.008
- Kim DY, Kim JH. Comparison of shrinkage according to thickness of photopolymerization resin for 3D printing. J Tech Dent. 2021;43:1-5. https://doi.org/10.14347/jtd.2021.43.1.1
- Lee BI, You SG, You SM, Kim JH. Comparison of three-dimensional adaptation as per the rinsing time of temporary crown manufactured using a digital light processing printer. J Tech Dent. 2020;42:334-340. https://doi.org/10.14347/jtd.2020.42.4.334
- Kim DY. Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath. J Korean Acad Dent Technol. 2020;42:113-120. https://doi.org/10.14347/KADT.2020.42.2.113
- Kim DY, Lee GY, Kang HW, Yang CS. Comparative analysis of strain according to two wavelengths of light source and constant temperature bath deposition in ultraviolet-curing resin for dental three-dimensional printing. J Tech Dent. 2020;42:208-212. https://doi.org/10.14347/JTD.2020.42.3.208
- Unkovskiy A, Schmidt F, Beuer F, Li P, Spintzyk S, Kraemer Fernandez P. Stereolithography vs. direct light processing for rapid manufacturing of complete denture bases: an in vitro accuracy analysis. J Clin Med. 2021;10:1070. https://doi.org/10.3390/jcm10051070
- Kim D, Shim JS, Lee D, Shin SH, Nam NE, Park KH, et al. Effects of post-curing time on the mechanical and color properties of three-dimensional printed crown and bridge materials. Polymers (Basel). 2020;12:2762. https://doi.org/10.3390/polym12112762
- Kwon Y, Cho UR. Study on the improvement of film shrinkage in UV-curing process. Polymer(Korea). 2011;35:320-324.
- Son CE, Choi SS. Analytical techniques for measurement of crosslink densities of rubber vulcanizates. Elastomers Compos. 2019;54:209-219. https://doi.org/10.7473/ec.2019.54.3.209
- Park KM. Study on shear bond strength of various composite resins to artificial denture teeth. J Korean Acad Dent Technol. 2014;36:171-177. https://doi.org/10.14347/kadt.2014.36.3.171
- Kim DY, Lee GY, Kim JH, Yang CS. Comparative analysis of strain according to the deposition of a constant temperature water bath of a denture-base artificial tooth produced using three-dimensional printing ultraviolet-curing resin. J Tech Dent. 2020;42:202-207. https://doi.org/10.14347/JTD.2020.42.3.202
- Shin DH, Park YM, Park SH. Correlation between UV-dose and shrinkage amounts of post-curing process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng. 2018;17:47-53.
- Lee BI, You SG, You SM, Kim DY, Kim JH. Evaluating the accuracy (trueness and precision) of interim crowns manufactured using digital light processing according to post-curing time: an in vitro study. J Adv Prosthodont. 2021;13:89-99. https://doi.org/10.4047/jap.2021.13.2.89
- Kim BS, Kim WS, Kim SM, Kim JJ, Kim JH, Park NK, et al. Complete denture technologys. Seoul: Komoonsa, 2019.
- Lemos CAA, Verri FR, Gomes JML, Santiago Junior JF, Moraes SLD, Pellizzer EP. Bilateral balanced occlusion compared to other occlusal schemes in complete dentures: a systematic review. J Oral Rehabil. 2018;45:344-354. https://doi.org/10.1111/joor.12607
- International Organization for Standardization (ISO). ISO 12836:2015 Dentistry - digitizing devices for CAD/CAM systems for indirect dental restorations - test methods for assessing accuracy. 2nd ed. Geneva: ISO, 2015.
- International Organization for Standardization (ISO). ISO 5725-1:1994 - accuracy (trueness and precision) of measurement methods and results - part 1: general principles and definitions. Geneva: ISO, 1994.