DOI QR코드

DOI QR Code

Wind induced response of corner modified 'U' plan shaped tall building

  • Mandal, Shanku (Department of Civil Engineering, Indian Institute of Engineering Science and Technology) ;
  • Dalui, Sujit K. (Department of Civil Engineering, Indian Institute of Engineering Science and Technology) ;
  • Bhattacharjya, Soumya (Department of Civil Engineering, Indian Institute of Engineering Science and Technology)
  • 투고 : 2020.07.05
  • 심사 : 2021.04.26
  • 발행 : 2021.06.25

초록

In the present study, the well-adopted practice of minor aerodynamic modifications (chamfered corner and rounded corner) has been introduced on widely used irregular U plan shaped tall building to minimize the wind induced responses and also to give a good aesthetics. The necessary design inputs for a wind resistance design such as force coefficient and pressure coefficients have been well explored and illustrated graphically to provide a complete guideline to the designer. The randomness of wind directionality has a significant impact on tall structures, which is generally not detailed in existing design codes, is incorporated by considering wind directions ranging from 0° to 180° at an interval of 15°. Computational fluid dynamics (CFD) has been utilized to simulate wind flow using two turbulence models, i.e., k-epsilon and Shear Stress Transport. The model has been validated by comparing the results of a published research article on a U-shaped building without corner modification. The grid independence study has been done to check the reliability and accuracy of the analysis results. Since such study of wind directionality on corner modified U-shaped building is not observed in the existing literature, it constitutes the uniqueness of the present study. A significant reduction in force coefficient has been achieved by implementing modification, but the faces of those updated corners mostly been attracted by excessive pressure. This indicates the necessity of proper cladding configurations. The rounded corner buildings are turning out to be more effective when compared to the chamfered corner for reducing wind load.

키워드

참고문헌

  1. Ahuja, A.K. and Chakrabarti, A. (2013), "An experimental investigation of wind pressure developed in tall buildings for different plan shape", Int. J. Innov. Res. Stud., 2(6), 605-614.
  2. Alminhana, G.W., Braun, A. L. and Loredo-Souza, A.M. (2018), "A numerical-experimental investigation on the aerodynamic performance of CAARC building models with geometric modifications", J. Wind Eng. Ind. Aerod., 180, 34-48. https://doi.org/10.1016/j.jweia.2018.07.001.
  3. Amin, J. and Ahuja, A. (2011), "Experimental study of windinduced pressures on buildings of various geometries", Int. J. of Eng., Sci. and Tech., 3(5), 1-19. https://doi.org/10.4314/ijest.v3i5.68562.
  4. Bairagi, A.K. and Dalui, S.K. (2018), "Comparison of aerodynamic coefficients of setback tall buildings due to wind load", Asian J. Civil Eng., 19(2), 205-221. https://doi.org/10.1007/s42107-018-0018-3.
  5. Bandi, E.K., Tamura, Y., Yoshida, A., Kim, Y.C. and Yang, Q. (2013), "Experimental investigation on aerodynamic characteristics of various triangular-section high-rise buildings", J. Wind Eng. Ind. Aerod., Elsevier, 122, 60-68. https://doi.org/10.1016/j.jweia.2013.07.002.
  6. Bhattacharyya, B. and Dalui, S.K. (2018), "Investigation of mean wind pressures on "E" plan shaped tall building", Wind Struct., 26(2), 99-114. https://doi.org/10.12989/was.2018.26.2.099.
  7. Bhattacharyya, B., Dalui, S.K. and Ahuja, A.K. (2014), "Wind induced pressure on "E" plan shaped tall buildings", Jordan J. Civil Eng., 8(2), 120-134.
  8. Blocken, B. (2014), "50 years of computational wind engineering: Past present and future", J. Wind Eng. Ind. Aerod., 129, 69-102. https://doi.org/10.1016/j.jweia.2014.03.008.
  9. Celik, B.I., Ghia, U., Roache, P.J., Freitas, C.J., Coleman. H. and Raad, P.E. (2008), "Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications", J. Fluids Eng. https://doi.org/10.1115/1.2960953.
  10. Cheng, L., Lam, K.M. and Wong, S.Y. (2015), "POD analysis of crosswind forces on a tall building with square and H-shaped cross sections", Wind Struct., 21(1), 63-84. https://doi.org/10.12989/was.2015.21.1.063.
  11. Chiodi, R. and Ricciardelli, F. (2014), "Three issues concerning the statistics of mean and extreme wind speeds", J. Wind Eng. Ind. Aerod., 125, 156-167. https://doi.org/10.1016/j.jweia.2013.12.009.
  12. Choi, C. and Yu, W. (1999), "Finite element techniques for wind engineering", J. Wind Eng. Ind. Aerod., 81(1-3), 83-95. https://doi.org/10.1016/S0167-6105(99)00010-0.
  13. Choi, C. and Yu, W. (1999), "Finite element techniques for wind engineering", J. Wind Eng. Ind. Aerod., 81(1-3), 83-95. https://doi.org/10.1016/S0167-6105(99)00010-0.
  14. Choi, C.K. and Kwon, D.K. (2003), "Effects of corner cuts and angles of attack on the Strouhal number of rectangular cylinders", Wind Struct, 6(2), 127-140. https://doi.org/10.12989/was.2003.6.2.127.
  15. Choi, C.K. and Kwon, D.K. (2003), "Effects of corner cuts and angles of attack on the Strouhal number of rectangular cylinders", Wind Struct., 6(2), 127-140. https://doi.org/10.12989/was.2003.6.2.127.
  16. Chul, Y., Kanda, J. and Tamura, Y. (2011), "Wind-induced coupled motion of tall buildings with varying square plan with height", J. Wind Eng. Ind. Aerod., 99(5), 638-650. https://doi.org/10.1016/j.jweia.2011.03.004.
  17. Daemei, A.B., Khotbehsara, E.M., Nobarani, E.M. and Bahrami, P. (2019), "Study on wind aerodynamic and flow characteristics of triangular-shaped tall buildings and CFD simulation in order to assess drag coefficient", Ain Shams Eng. J., 10(3), 541-548. https://doi.org/10.1016/j.asej.2018.08.008.
  18. Deng, T., Yu, X. and Xie, Z. (2015), "Aerodynamic measurements of across-wind loads and responses of tapered super high-rise buildings", Wind Struct., 21(3), 331-352. http://dx.doi.org/10.12989/was.2015.21.3.331.
  19. Elshaer, A. and Bitsuamlak. G (2018), "Multiobjective aerodynamic optimization of tall building openings for wind-induced load reduction", J. Struct. Eng., 144(10), 1-11. https://doi.org/10.1061/(ASCE),ST.1943-541X.0002199.
  20. Elshaer, A., Bitsuamlak, G. and EI Damatty, A. (2016), "Aerodynamic shape optimization of tall buildings using twisting and corner modifications", In: 8th International Colloquium on Bluff Body Aerodynamics and Applications Northeastern University, Boston, U.S.A., June.
  21. Elshaer, A., Bitsuamlak, G. and EI Damatty, A. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimization", Eng. Struct., 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019.
  22. Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2014), "Wind load reductions due to building corner modifications", In 22nd Annual Conf. of the CFD Society of Canada, Toronto, Canada June.
  23. Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2015a), "Aerodynamic shape optimization for corners of tall buildings using CFD", The 14th Int. Conf. Wind Eng., June.
  24. Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2015b), "Vibration control of tall buildings using aerodynamic optimization", In: 25th CANCAM London, Ontario, Canada, May. https://doi.org/10.13140/RG.2.1.1703.3120.
  25. Franke, J., Hirsch, C., Jensen, A.G., Krus, H.W., Schatzmann, M., Westbury P.S., Miles S.D., Wisse, J.A. and Wright, N.G. (2004), "Recommendations on the use of CFD in wind engineering", COST Action C14. European Science Foundation COST Office.
  26. Gomes, M.G., Rodrigues, A.M. and Mendes, P. (2005), "Experimental and numerical study of wind pressures on irregular-plan shapes", J. Wind Eng. Ind. Aerod., 93(10), 741-756. https://doi.org/10.1016/j.jweia.2005.08.008.
  27. Gu, M. and Quan, Y. (2004), "Across-wind loads of typical tall buildings", J. Wind Eng. Ind. Aerod., 92(13), 1147-1165. https://doi.org/10.1016/j.jweia.2004.06.004.
  28. Hansora, A.G., Nimodiya. P.N. and Gehlot. K.P. (2015), "Numerical analysis of wind loads on tapered shape tall buildings", Int. J. Sci. Tech. Eng., 1(11), 92-97.
  29. Jamieson, N.J., Carpenter, P. and Cenek, P.D. (1992), "Wind induced external pressures on a tall building with various corner configurations", J. Wind Eng. Ind. Aerod., 44(1-3), 2401-2412. https://doi.org/10.1016/0167-6105(92),90032-6.
  30. Kawai, H. (1998), "Effect of corner modifications on aeroelastic instabilities of tall buildings", J. Wind Eng. Ind. Aerod., 74, 719-729. https://doi.org/10.1016/S0167-6105(98),00065-8.
  31. Kim, Y.C. and Kand, J. (2013), "Wind pressures on tapered and set-back tall buildings", J. Fluids Struct., 39, 306-321. https://doi.org/10.1016/j.jfluidstructs.2013.02.008.
  32. Kim, Y.C. and Kanda, J. (2010a), "Characteristics of aerodynamic forces and pressures on square plan buildings with height variations", J. Wind Eng. Ind. Aerod., 98(8-9), 449-465. https://doi.org/10.1016/j.jweia.2010.02.004.
  33. Kim, Y.C. Kanda, J. (2010b), "Effects of taper and set-back on wind force and wind-induced response of tall buildings", Wind Struct., 13(6), 499-517. https://doi.org/10.12989/was.2010.13.6.499.
  34. Kim, Y.C., Bandi, E.K., Yoshida, A. and Tamura, Y. (2015), "Response characteristics of super-tall buildings - Effects of number of sides and helical angle", J. Wind Eng. Ind. Aerod., 145, 252-262. https://doi.org/10.1016/j.jweia.2015.07.001.
  35. Kim, Y.C., Tamura, Y., Tanaka, H., Bandi, E.K. and Yoshida, A. (2014), "Wind-induced responses of super-tall buildings with various atypical building shapes", J. Wind Eng. Ind. Aerod., 133, 191-199. https://doi.org/10.1016/j.jweia.2014.06.004.
  36. Kim, Y.C., Yoshida, A., Tamura, Y. and Yi, J. (2018), "Experimental study of aerodynamic damping of a twisted supertall building", J. Wind Eng. Ind. Aerod, 176, 1-12. https://doi.org/10.1016/j.jweia.2018.03.005.
  37. Kim, Y.M. and You, K.P. (2002), "Dynamic responses of a tapered tall building to wind load", J. Wind Eng. Ind. Aerod., 90(12-15), 1771-1782. https://doi.org/10.1016/S0167-6105(02)00286-6.
  38. Kim, Y.M., You, K.P. and Ko, N.H. (2008), "Across-wind responses of an aeroelastic tapered tall building", J. Wind Eng. Ind. Aerod., 96(8-9), 13071319. https://doi.org/10.1016/j.jweia.2008.02.038.
  39. Kwok, K.C.S., Wilhelm, P.A. and Wilkie, B.G. (1988), "Effect of edge configuration on wind-induced response of tall buildings", Eng. Struct., 10(2), 135-140. https://doi.org/10.1016/0141-0296(88),90039-9.
  40. Li, Y. and Li, Q.S. (2016), "Across-wind dynamic loads on Lshaped tall buildings", Wind Struct., 23(5), 385-403. https://doi.org/10.12989/was.2016.23.5.385.
  41. Mallick, M., Kumar, A. and Patra, K.C. (2019), "Experimental investigation on the wind-induced pressures on C-shaped buildings", KSCE J. Civil Eng., 23(8), 3535-3546. https://doi.org/10.1007/s12205-019-1929-6.
  42. Mallick, M., Mohanta, A., Kumar, A. and Raj, V. (2018), "Modelling of wind pressure coefficients on C-shaped building models", Modelling Simul. Eng., 2018, 1-13, https://doi.org/10.1155/2018/6524945.
  43. Mukherjee, S., Chakraborty, S., Dalui, S.K. and Ahuja, A.K. (2014), "Wind-induced pressure on "Y" plan shape tall building", Wind Struct., 19(5), 523-540. https://doi.org/10.12989/was.2014.19.5.523.
  44. Nidhul, K. (2014), "Influence of corner geometry on the flow structure and flow characteristics for flow past a square cylinder at re=150", Int. J. Resea. Aeron. Mech. Eng. 2(12), 32-41.
  45. Paul, R. and Dalui, S.K. (2016), "Wind effects on "Z" plan-shaped tall building: a case study", Int. J. Adv. Struct. Eng., 8(3), 319-335. https://doi.org/10.1007/s40091-016-0134-9.
  46. Revuz, J., Hargreaves, D.M. and Owen, J.S. (2012), "On the domain size for the steady-state CFD modelling of a tall building", Wind Struct., 15(4), 313-329. https://doi.org/10.12989/was.2012.15.4.313.
  47. Ricciardelli, F. and Polimeno, S. (2006), "Some characteristics of the wind flow in the lower Urban Boundary Layer", J. Wind Eng. Ind. Aerod., 94(11), 815-832. https://doi.org/10.1016/j.jweia.2006.06.003.
  48. Sanyal, P. and Dalui, S.K. (2020), "Effect of corner modifications on Y plan shaped tall building under wind load", Wind Struct., 30(3), 245-260. https://doi.org/10.12989/was.2020.30.3.245.
  49. Sevalia, J.K., Desai, A.K. and Vasanwala, S.A. (2012), "Effect of geometric plan configuration of tall building on wind force coefficient using Cfd", Int. J. Adv. Eng. Research Studies, I(II), 127-130.
  50. Sun, X., Liu, H., Su, N. and Wu, Y. (2017), "Investigation on wind tunnel tests of the kilometer skyscraper", Eng. Sturct., 148, 340-356. https://doi.org/10.1016/j.engstruct.2017.06.052.
  51. Tamura, T. and Miyagi, T. (1999), "The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes", J. Wind Eng. Ind. Aerod., 83(1-3), 135-145. https://doi.org/10.1016/S0167-6105(99),00067-7.
  52. Tamura, T., Miyagi, T. and Kitagishi, T. (1998), "Numerical prediction of unsteady pressures on a square cylinder with various corner shapes", J. Wind Eng. Ind. Aerod., 74, 531-542. https://doi.org/10.1016/S0167-6105(98)00048-8
  53. Tamura, Y. and Phuc, P. Van (2015), "Development of CFD and applications: Monologue by a non-CFD-expert", J. Wind Eng. Ind. Aerod., 144, 3-13. https://doi.org/10.1016/j.jweia.2015.05.003.
  54. Tamura, Y. Tanaka, H., Ohtake, K., Kim. Y.C., Yoshida, A., Brandi, E.K., Xu, X. and Yang, Q. (2015), "Aerodynamic control of wind-induced vibrations and flow around super-tall buildings", Int Conf. Adv. Exp. Struc.Eng, University of Illinois, United States, August.
  55. Tamura, Y., Tanaka, H., Ohtake, K., Nakai, M. and Kim. Y. (2010), "Aerodynamic characteristics of tall building models with various unconventional configurations", Structures Congress 2010, Orlando, Florida, United States, May, 3104-3113. https://doi.org/10.1061/41130(369),278.
  56. Tanaka, H., Tamura, Y. And Kim, Y.C. (2013), "Aerodynamic characteristics of super tall buildings with unconventional configurations", Wind Engineers, JAWE, 38(3), 306-311. https://doi.org/10.5359/jawe.38.306.
  57. Tanaka, H., Tanaka, H., Ohtake, K., Nakai, M. and Kim. Y. (2012), "Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurations", J. Wind Eng. Ind. Aerod., 107-108, 179-191. https://doi.org/10.1016/j.jweia.2012.04.014.
  58. Thordal, M.S., Bennetsen, J.C. and Koss, H.H.H. (2019), "Review for practical application of CFD for the determination of wind load on high-rise buildings", J. Wind Eng. Ind. Aerod., 186, 155-168. https://doi.org/10.1016/j.jweia.2018.12.019.
  59. Tse, K.T., Hitchcock, P.A., Kwok, K.C.S., Thepmongkorn, S. and Chan, C.M. (2009), "Economic perspectives of aerodynamic treatments of square tall buildings", J. Wind Eng. Ind. Aerod., 97(9-10), 455-467. https://doi.org/10.1016/j.jweia.2009.07.005.
  60. You, K.P., Kim, Y.M. and Ko, N.H. (2008), "The evaluation of wind-induced vibration responses to a tapered tall building", Struct. Des. Tall Spec. Build., 17(3), 655-667. https://doi.org/10.1002/tal.371.
  61. Zheng, C., Xie, Y., Khan, M., Wu, Y. and Liu, J (2018), "Windinduced responses of tall buildings under combined aerodynamic control", Eng. Struct., 175, 86-100. https://doi.org/10.1016/j.engstruct.2018.08.031.