Advances in materials Research

  • 제10권2호
  • /
  • Pages.99-114
  • /
  • 2021
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical study of reinforced natural slope by retaining wall with prestressed anchor

  • Said, Nouri (Laboratory of Structures, Geotechnical and Risks (LSGR), University of Hassiba Benboual) ;
  • Amar, Nechnech (Laboratory of Environment, Water Geomechanics and works (LEWGW), University for Science and Technology)
  • 투고 : 2019.12.26
  • 심사 : 2021.03.17
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The slope design under geological and hydraulic conditions has always been a different geotechnics problem. There have been potential main landslide and an undisturbed thin layer of saturated clays soil under the slopes in urban construction development area of Miliana city province of Algeria; its terrain is mountains. The landslide was framed by gravity creeping of thin layer of alluvium and mares cracks along steep clays. The favorable sliding surface larger than 2500 m2 had destroyed the foundation of the building. In order to learn from the comparison between stabilized and non-stabilized slopes with different improvement, the authors also investigated the slopes reinforced by retaining wall with prestressed anchor and discussed their behavior parameters. Based on finite element method, the analysis of slope stability under natural conditions is discussed first, then the support structure of retaining wall and anchor reinforced and their effect of slope stability are analyzed, and also the slope stability of each case is able to be compared. The results show that the stability of slope was significantly improved after reinforcement, and anchor reinforced with retaining wall has obvious reverse anchoring effect on soil. By comparing the factor of safety, stress level and displacement field before and after slope reinforcement, it is found that better reinforcement results can be achieved if strong reinforcement is applied upon the regions with high sliding surface. Furthermore, the increase in stress level at the zone dangerous is more favorable of improving the safety of the critical region.

키워드

과제정보

I would like to acknowledge people who work at National Center for Research on Earthquake Engineering of Algeria (CGS-Algiers) and Central Laboratory of Public Works (LCTP-Algiers) for their wonderful collaboration, whose expertise was invaluable in formulating of the research topic. The author would like to acknowledge the urban planning and construction engineer Moulai Souiga Hadj Belmehel (Relizane, Algeria) for his contribution regarding numerical implementation issues, those numerical analyses were performed with Plaxis code.

참고문헌

  1. Abioghli, H. and Branch, M.S. (2011), "Effect of changes of mesh size on the numerical analysis of reinforced soil walls", Austral. J. Bas. and Appl. Sci., 5(12), 1693-1696. https://www.semanticscholar.org/845b5fb3f442d64a731f857309a8a703baf876b6
  2. Benamara, F.Z. and Belabed, L. (2011), "The analysis stability of anchor retaining wall", Adv. Mater. Res., 324, 324-379. https://doi.org/10.4028/www.scientific.net/AMR.324.376
  3. Briaud, J.L. and Lim, Y. (1999), "Tieback walls in sand: numerical simulation and design implications", J. Geotech. Geoenviron. Eng., 125(2), 101-110. https://worldcat.org/oclc/3519342 https://doi.org/10.1061/(ASCE)1090-0241(1999)125:2(101)
  4. Brinkgreve, R.B.J. and Vermeer, P.A. (2002), "Plaxis 2D Version 8 tutorial manuel", Balkema Publishers, Tokyo, Japan.
  5. Brinkgreve, R.B.J., Kumarswamy, S. and Swolfs, W.M. (2016), "Plaxis 3D 2016 manual", Plaxis bv, Delft, Netherlands.
  6. Cai, F. and Ugai, K. (2003), "Reinforcing mechanism of anchors in slopes: a numerical comparison of results of LEM and FEM", Int. J. Num. Anal. Meth. Geotech., 27(7), 549-564. https://doi.org/10.1002/nag.284
  7. Cai, F., Ugai, K., Wakai, A. and Li, Q. (1998), "Effects of horizontal drains on slope stability under rainfall by three-dimensional finite element analysis", Comput. Geotech., 23, 255-275. https://doi.org/10.1002/nag.284
  8. Chen, L., Zhang, W., Gao, X., Wang, L., Li, Z., Bohlke, T. and Perego, U. (2020a), "Design charts for reliability assessment of rock bedding slopes stability against bi-planar sliding: SRLEM and BPNN approaches", Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards. https://doi.org/10.1080/17499518.2020.1815215
  9. Chen, L., Zhang, W., Zheng, Y., Gu, D. and Wang, L. (2020b), "Stability analysis and design charts for over-dip rock slope against bi-planar sliding", Eng. Geol., 275, 105732. https://doi.org/10.1016/j.enggeo.2020.105732
  10. Chen, F., Zhang, R., Wang, Y., Liu, H., Bohlke, T. and Zhang, W. (2020c), "Probabilistic stability analyses of slope reinforced with piles in spatially variable soils", Int. J. Approx. Reason., 122, 66-79. https://doi.org/10.1016/j.ijar.2020.04.006
  11. Cheng, H., Chen, J., Chen, R., Chen, G. and Zhong, Y. (2018), "Risk assessment of slope failure considering the variability in soil properties", Comput. Geotech., 103, 61-72. https://doi.org/10.1016/j.compgeo.2018.07.006
  12. refDesai, C.S., Muqtadir, A. and Scheele, F. (1986), "Interaction analysis of anchor-soil system", J. Geotech. Eng., 112(5), 537-553. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:5(537)
  13. Fawaz, A., Farah, E. and Hagechehade, F. (2014), "Slope stability analysis using numerical modelling", Amer. J. Civ. Eng., 2(3), 60-67. https://doi.org/10.11648/j.ajce.20140203.11
  14. Gao, X., Liu, H., Zhang, W., Wang, W. and Wang, Z. (2019), "Influences of reservoir water level drawdown on slope stability and reliability analysis", Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 13(2), 145-153. https://doi.org/10.1080/17499518.2018.1516293
  15. Griffiths, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotech., 49(3), 387-403. https://doi.org/10.1680/geot.1999.49.3.387
  16. Hosseinitoudeshki, V., Baharvand, M. and Bayat, F. (2015), "The Effect of Spacing of Rock Bolts on the Stability of Rock Slopes", J. Multidisc. Eng. Scien. Technol., 2(11), 3221-3224. https://www.jmest.org/vol-2-issue-11-november-2015
  17. Hryciw, R.D. (1991), "Anchor design for slope stabilization by surface loading", J. Geotech. Eng., 117(8), 1260-1274. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:8(1260)
  18. Huang, R.Q. (2008), "Geodynamical process and stability control of high rock slope development", Chinese J. Rock Mech. Eng., 27(8), 1525-1544. https://doi.org/10.4028/www.scientific.net/AMR.324.37
  19. Huang, M. and Jia, C.Q. (2009), "Strength reduction FEM in stability analysis of soil slopes subjected to transient unsaturated seepage", Comput. Geotech., 36, 93-101. https://doi.org/10.1016/j.compgeo.2008.03.006
  20. Liu, X., Chen C. and Zheng, Y. (2012), "Optimum arrangement of prestressed cables in rock anchorage", Procedia Earth Planet. Sci., 5, 76-82. https://doi:10.1016/j.proeps.2012.01.013
  21. Liu, L., Zhang, S., Cheng, Y.M. and Liang, L. (2019), "Advanced reliability analysis of slopes in spatially variable soils using multivariate adaptive regression splines", Geosci. Front., 10(2), 671-682. https://doi.org/10.1016/j.gsf.2018.03.013
  22. Pinyol, N.M., Alonso, E.E. and Olivella, S. (2008), "Rapid drawdown in slopes and embankments", Water Resour. Res., 44, 3-25. https://doi.org/10.1029/2007WR006525
  23. Sabatini, P.J., Pass, D.G. and Bachus, R.C. (1999), "Geotechnical engineering circular No. 4: ground anchors and anchored systems", Federal Highway Administration. Office of Bridge Technology, USA, 176 p. https://www.fhwa.dot.gov/engineering/geotech/pubs/if99015.pdf
  24. Valli, P.P. (2000), "Numerical study to stabilise landslides by trench drains", Comput. Geotech., 27, 63-77. https://doi.org/10.1016/S0266-352X(00)00006-9
  25. Wang, L., Wu, C., Li, Y., Liu, H., Zhang, W. and Chen, X. (2019), "Probabilistic risk assessment of unsaturated slope failure considering spatial variability of hydraulic parameters", KSCE J. Civ. Eng., 23, 5032-5040. https://doi.org/10.1007/s12205-019-0884-6
  26. Wang, L., Wu, C.Z., Gu X., Liu, H.L. and Mei, G. (2020a), "Probabilistic stability analysis of earth dam slope under transient seepage using multivariate adaptive regression splines", Bull. Eng. Geol. Environ., 79, 2763-2775. https://doi.org/10.1007/s10064-020-01730-0
  27. Wang, L., Wu, C.Z., Tang, L., Zhang, W.G., Lacasse, S., Liu, H.L. and Gao, L. (2020b), "Efficient reliability analysis of earth dam slope stability using extreme gradient boosting method", Acta Geotech., 15(11), 3135-3150. https://doi.org/10.1007/s11440-020-00962-4
  28. Wang, L., Zhang, W.G., Wu, Gao, X.C., Liu, H.L. and Bohlke, T. (2020c), "Stability analysis of soil slopes based on strain information", Acta Geotech., 15(11), 3121-3134. https://doi.org/10.1007/s11440-020-00985-x
  29. Wang, Z.Y., Gu, D.M. and Zhang, W.G. (2020d), "A DEM study on influence of excavation schemes on slope stability", J. Mount. Sci., 17(6), 1509-1522. https://doi.org/10.1007/s11629-019-5605-6
  30. Yang, G., Zhong, Z., Zhang, Y. and Fu, X. (2015), "Optimal design of anchor cables for slope reinforcement based on stress and displacement fields", J. Rock Mach. Geotech. Eng., 7, 411-420. https://doi.org/10.1016/j.jrmge.2015.04.004
  31. Yuan, W.F.H. (2014), "Numerical Analysis of Support Structure of Anchor-Cable Frame Beam of Highway Slope", Elect. J. Geotech. Eng., 19(Q), 4159-4171. http://www.ejge.com/Index_ejge.htm
  32. Zhang, J., Wang, H., Huang, H.W. and Chen, L.H. (2017), "System reliability analysis of soil slopes stabilized with piles", Eng. Geol., 229, 45-52. https://doi.org/10.1016/j.enggeo.2017.09.009
  33. Zheng, H., Sun, G. and Liu, D. (2009), "A practical procedure for searching critical slip surfaces of slopes based on the strength reduction technique", Comput. Geotech., 36(1-2), 1-5. https://doi.org/10.1016/j.compgeo.2008.06.002
  34. Zhu, D.Y., Lee, C.F., Chan, D.H. and Jiang, H.D. (2005), "Evaluation of the stability of anchor-reinforced slopes", Can. Geotech. J., 42(5), 1342-1349. https://doi.org/10.1139/t05-060