Smart Structures and Systems

  • 제27권2호
  • /
  • Pages.139-156
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamical models of a suspension bridge driven by vibration data

  • Gattulli, Vincenzo (Department of Structural and Geotechnical Engineering, Sapienza University of Rome) ;
  • Cunha, Alvaro (Construct-ViBest, Faculty of Engineering (FEUP), University of Porto) ;
  • Caetano, Elsa (Construct-ViBest, Faculty of Engineering (FEUP), University of Porto) ;
  • Potenza, Francesco (Department of Engineering and Geology, University G. d'Annunzio of Chieti-Pescara) ;
  • Arena, Andrea (Department of Structural and Geotechnical Engineering, Sapienza University of Rome) ;
  • Di Sabatino, Umberto (Department of Civil, Construction-Architectural and Environmental Engineering, University of L'Aquila)
  • 투고 : 2020.11.20
  • 심사 : 2020.12.16
  • 발행 : 2021.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

The great availability of measurement systems permits to acquire quite easily data related to structural oscillations in operational conditions. This occurrence may permit to enhance our capability to data-driven computing using directly experimental data and pertinent constraints and conservation laws, such as compatibility and equilibrium, surely certain. In the paper, a methodology will be presented to furnish an analytical mechanical model of a suspension bridge in which the main parameters can be derived from vibration measurements. In this respect, Polymax and Enhanced Frequency Domain Decomposition identification procedures are used to determine a complete modal model which is used to evaluate an error function. Optimization algorithms are used to evaluate the function minima in the fundamental parameter space. The procedure will be validated by results coming from a sophisticated finite element model for which geometric measurements are included through a 3D point cloud geometrical model and a consequent Building Information model (BIM) constructed with images acquired by unmanned aerial vehicle (UAV). The case study of the pedestrian cable suspension Polvorines bridge (100 meters of span) is considered to demonstrate the procedure, due the test campaign conducted on March 2020.

키워드

과제정보

Part of the research leading to these results has received funding from the Italian Government under Cipe resolution n.135 (Dec. 21. 2012) under the project INCIPICT-INnovating City Planning through Information and Communication Technologies. The experimental results of the Polvorines steel bridge is part of the research project DESDEMONA - DEtection of Steel Defects by Enhanced MONitoring and Automated procedure for self-inspection and maintenance (grant agreement number RFCS-2018_800687) supported by EU Call RFCS-2017.

참고문헌

  1. Antonacci, E., De Stefano, A., Gattulli, V., Lepidi, M. and Matta, E. (2012), "Comparative study of vibration-based parametric identification techniques for a three-dimensional frame structure", J. Struct. Control Health Monitor., 19(5), 579-608. https://doi.org/10.1002/stc.449
  2. Arena, A. and Lacarbonara, W. (2012), "Nonlinear parametric modeling of suspension bridges under aeroelastic forces: torsional divergence and flutter", Nonlinear Dyn., 70(4), 2487-2510. https://doi.org/10.1007/s11071-012-0636-3
  3. Arena, A., Lacarbonara, W. and Marzocca, P. (2016), "Post-critical behavior of suspension bridges under nonlinear aerodynamic loading", J. Computat. Nonlinear Dyn., 11(1), 011005, 1-11. https://doi.org/10.1115/1.4030040
  4. Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater. Struct., 10(3), 441-445. https://doi.org/10.1088/0964-1726/10/3/303
  5. Caetano, E., Cunha, A. and Taylor, C.A. (2000), "Investigation of dynamic cable-deck interaction in a physical model of a cable stayed bridge, Part I: Modal analysis", Earthq. Eng. Struct. Dyn., 29(4), 481-498. https://doi.org/10.1002/(SICI)1096-9845(200004)29:4<481::AID-EQE918>3.0.CO;2-1
  6. Caetano, E., Cunha, A., Gattulli, V. and Lepidi, M. (2008), "Cabledeck dynamic interactions at the International Guadiana Bridge: On-site measurements and finite element modelling", Struct. Control Health Monitor., 15(3), 237-264. https://doi.org/10.1002/stc.241
  7. Casalotti, A., Arena, A. and Lacarbonara, W. (2014), "Mitigation of post-flutter oscillations in suspension bridges by hysteretic tuned mass dampers", Eng. Struct., 69, 62-71. https://doi.org/10.1016/j.engstruct.2014.03.001
  8. Cunha, A., Caetano, E., Magalhaes, F. and Moutinho, C. (2018), "Dynamic identification and continuous dynamic monitoring of bridge: different applications along bridge life cycle", Struct. Infrastruct. Eng., 14(3), 445-467. https://doi.org/10.1080/15732479.2017.1406959
  9. Gattulli, V. and Lepidi, M. (2007), "Localization and veering in the dynamics of cable-stayed bridges", Comput. Struct., 85(21-22), 1661-1678. https://doi.org/10.1016/j.compstruc.2007.02.016
  10. Gattulli, V., Lofrano, E., Paolone, A. and Potenza, F. (2019a), "Measured properties of structural damping in railway bridge", J. Civil Struct. Health Monitor., 9(5), 639-653. https://doi.org/10.1007/s13349-019-00358-3
  11. Gattulli, V., Lepidi, M., Potenza, F. and Di Sabatino, U. (2019b), "Modal interactions in the nonlinear dynamics of a BeamCable-Beam", Nonlinear Dynamics, 96(4), 2547-2566. https://doi.org/10.1007/s11071-019-04940-8
  12. Gattulli, V., Lepidi, M., Potenza, F. and Di Sabatino, U. (2016), "Dynamics of masonry walls connected by vibrating cable in a historic structure", Meccanica, 51(11), 2813-2826. https://doi.org/10.1007/s11012-016-0509-9
  13. Hu, W.-H., Moutinho, C., Caetano, E., Magalhaes, F. and Cunha, A. (2012), "Continuos dynamic monitoring of a lively footbridge for serviceability assessment and damage detection", Mech. Syst. Signal Process., 33, 38-55. https://doi.org/10.1016/j.ymssp.2012.05.012
  14. Hua, X., Wang, C., Li, S. and Chen, Z. (2020), "Experimental investigation of wind-induced vibrations of main cables for suspension bridge in construction phases", J. Fluid Struct., 93, 102846. https://doi.org/10.1016/j.jfluidstructs.2019.102846
  15. Irvine, H.M. (1981), Cable Structures, The MIT Press.
  16. Jafarkhani, R. and Masri, S.F. (2011), "Finite element model updating using evolutionary strategy for damage detection", Comput.-Aided Civil Infrastruct. Eng., 26, 207-224. https://doi.org/10.1111/j.1467-8667.2010.00687.x
  17. Jimenez-Alonso, J.F., Saez, A., Caetano, E. and Cunha, A. (2019), "Lateral crowd-structure interaction model to analyse the change of the modal properties of footbridges", Struct. Control Health Monitor., 26(6), e2356. https://doi.org/10.1002/stc.2356
  18. Koo, K.Y., Brownjohn, J.M.W., List, D.I. and Cole, R. (2013), "Structural health monitoring of the Tamar suspension bridge", Struct. Control Health Monitor., 20, 609-625. https://doi.org/10.1002/stc.1481
  19. Larsen, A. and Larose, G.L. (2015), "Dynamic wind effects on suspension and cable-stayed bridge", J. Sound Vib., 334, 2-28. https://doi.org/10.1016/j.jsv.2014.06.009
  20. Mao, J.-X., Wang, H., Xun, Z.-X. and Zou, Z.-Q. (2017), "Variability analysis on modal parameters of Runyang Bridge during Typhoon Masta", Smart Struct. Syst., Int. J., 19(6), 653-663. https://doi.org/10.12989/sss.2017.19.6.653
  21. Mottershead, J.E., Link, M. and Friswell, I. (2011), "The sensitivity method in finite element updating: A tutorial", Mech. Syst. Signal Process., 25, 2275-2296. https://doi.org/10.1016/j.ymssp.2010.10.012
  22. Nie, Z., Guo, E., Li, J., Hao, H., Ma, H. and Jiang, H. (2020), "Bridge condition monitoring using fixed moving principal component analysis", Struct. Control Health Monitor., 27, e2535. https://doi.org/10.1002/stc.2535
  23. Peeters, B. and De Roeck, G. (1999), "Reference-based stochastic subspace identification for output-only modal analysis", Mech. Signal Signal Process., 13(6), 855-878. https://doi.org/10.1006/mssp.1999.1249
  24. Peeters, B. and Van der Auweraer, H. (2015), "Polymax: a revolution in operational modal analysis", Proceedings of the 1st Operational Model Analysis Conference, Copenhagen, Denmark, April.
  25. Siringoringo, D.M. and Fujino, Y. (2018), "Seismic response of a suspension bridge: Insights from long-term full-scale seismic monitoring system", Struct. Control Health Monitor., 25(11), e2252. https://doi.org/10.1002/stc.2252
  26. Storn, R. and Price, K. (1997), "Differential Evolution - A simple and efficient heuristic for global optimization over continuous spaces", J. Global Optimiz., 11, 341-359. https://doi.org/10.1023/A:1008202821328
  27. Wickramasinghe, W.R., Thambiratnam, D.P. and Chan, T. (2020), "Damage detection in a suspension bridge using modal flexibility method", Eng. Fail. Anal., 107, 104194. https://doi.org/10.1016/j.engfailanal.2019.104194
  28. Zhou, H.F., Ni, Y.Q. and Ko, J.M. (2013), "Structural health monitoring of the Jiangyin Bridge: System upgrade and data analysis", Smart Struct. Syst., Int. J., 11(6), 637-662. https://doi.org/10.12989/sss.2013.11.6.637