DOI QR코드

DOI QR Code

Implementation of video motion magnification technique for non-contact operational modal analysis of light poles

  • Thiyagarajan, Jothi S. (School of Infrastructure, Indian Institute of Technology Bhubaneswar) ;
  • Siringoringo, Dionysius M. (Institute of Advanced Sciences, Yokohama National University) ;
  • Wangchuk, Samten (Department of Urban Innovation, Yokohama National University) ;
  • Fujino, Yozo (Institute of Advanced Sciences, Yokohama National University)
  • 투고 : 2020.07.13
  • 심사 : 2020.10.23
  • 발행 : 2021.02.25

초록

Damages on lights and utility poles mounted on the elevated highway or railway bridges were observed in the past several large earthquakes. The damages could have serious consequences to public safety, travelling vehicles or trains, and nearby properties. A previous study shows that the damages were caused by buckling and yielding of the pole due to excessive response amplification during large earthquake. Such amplification occurs when the bridge's natural frequency is close to the light pole's fundamental frequency. An investigation of the seismic performance of existing light pole mounted on elevated highway bridges is needed to avoid the response amplification. This includes the identification of the light pole's natural frequency and damping ratio. Vibration testing of the light pole using conventional contact sensors individually would require enormous effort and is time-consuming. Moreover, such vibration testing on a highway bridge deck would require traffic disruption to provide access. Video camera-based non-contact vision sensing is seen as a promising alternative to the conventional contact sensors for this purpose. The objective of this paper is to explore the use of non-contact vision sensing for operational modal analysis of light pole on highway viaduct. The phase-based video motion magnification method is implemented to obtain the light pole response in an ambient condition. Using this method, small and invisible displacement is magnified for a certain range of frequency of interest. Based on the magnified video frames, structural displacement is extracted using the image processing technique. The natural frequency and damping ratio of the light pole are estimated using the random decrement technique. The method is verified in a laboratory-scale experiment and implemented to practical field measurements of a light pole on a highway viaduct in Kanagawa, Japan. The results are compared with measurement by Laser Doppler Vibrometer. Both experiments suggest that the method could effectively obtain the natural frequency and damping ratio of the structures under the ambient condition where vibration amplitudes are very small and invisible with reasonable accuracy.

키워드

과제정보

This research is supported by Kajima Foundation through a research grant (PI: Dionysius Siringoringo). The first author is grateful to the Japan Society for the Promotion of Science (JSPS) support for the postdoctoral fellowship program in Japan during this research work. Support of measurement device from Bridge and Structure Laboratory, The University of Tokyo is greatly acknowledged.

참고문헌

  1. Bhowmick, S. and Nagarajaiah, S. (2020), "Identification of full-field dynamic modes using continuous displacement response estimated from vibrating edge video", J. Sound Vib., 115657. https://doi.org/10.1016/j.jsv.2020.115657
  2. Brincker, R. and Ventura, C. (2015), Introduction to Operational Modal Analysis, John Wiley and Sons.
  3. Chen, J.G., Wadhwa, N., Cha, Y.J., Durand, F., Freeman, W.T. and Buyukozturk, O. (2015), "Modal identification of simple structures with high-speed video using motion magnification", J. Sound Vib., 345, 58-71. https://doi.org/10.1016/j.jsv.2015.01.024
  4. Chen, J.G., Davis, A., Wadhwa, N., Durand, F., Freeman, W.T. and Buyukozturk, O. (2017), "Video camera-based vibration measurement for civil infrastructure applications", J. Infra. Syst., 23(3), B4016013. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000348
  5. Chen, J.G., Adams, T.M., Sun, H., Bell, E.S. and Buyukozturk, O. (2018), "Camera-based vibration measurement of the world war I memorial bridge in portsmouth, New Hampshire", J. Struct. Eng., 144(11), 04018207. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002203
  6. Cole Jr, H.A. (1973), "On-line failure detection and damping measurement of aerospace structures by random decrement signatures", Technical Report: NASA-CR-2205, Washington, USA. https://ntrs.nasa.gov/search.jsp?R=19730010202
  7. Feng, D. and Feng, M.Q. (2018), "Computer vision for SHM of civil infrastructure: From dynamic response measurement to damage detection-A review", Eng. Struct., 156, 105-117. https://doi.org/10.1016/j.engstruct.2017.11.018
  8. Helfrick, M.N., Niezrecki, C., Avitabile, P. and Schmidt, T. (2011), "3D digital image correlation methods for full-field vibration measurement", Mech. Syst. Signal Proc., 25(3), 917-927. https://doi.org/10.1016/j.ymssp.2010.08.013
  9. Ibrahim, S.R. (1977), "Random decrement technique for modal identification of structures", J. Spacecr. Rockets, 14(11), 696-700. https://doi.org/10.2514/3.57251
  10. Izuno, K., Tsushima, Y., Iida, T. and Kawano, K. (2008), "Dynamic response of highway bridge-lighting pole system for level 1 earthquake", J. Appl. Mech., 11, 1039-1046. [In Japanese] https://doi.org/10.2208/journalam.11.1039
  11. Molina-Viedma, A.J., Felipe-Sese, L., Lopez-Alba, E. and Diaz, F. (2018), "High frequency mode shapes characterization using Digital Image Correlation and phase-based motion magnification", Mech. Syst. Signal Proc., 102, 245-261. https://doi.org/10.1016/j.ymssp.2017.09.019
  12. Ni, Y.Q., Wang, Y.W., Liao, W.Y. and Chen, W.H. (2019), "A vision-based system for long-distance remote monitoring of dynamic displacement: Experimental verification on a supertall structure", Smart. Struct. Syst., Int. J., 24(6), 769-781. https://doi.org/10.12989/sss.2019.24.6.769
  13. Otsu, N. (1979), "A threshold selection method from gray-level histograms", IEEE Trans. Syst., Man, Cyber., 9(1), 62-66. https://doi.org/10.1109/TSMC.1979.4310076
  14. Pedrini, G., Osten, W. and Gusev, M.E. (2006), "High-speed digital holographic interferometry for vibration measurement", Appl. Optics, 45(15), 3456-3462. https://doi.org/10.1364/AO.45.003456
  15. Peeters, B. and De Roeck, G. (2001), "Stochastic system identification for operational modal analysis: a review", J. Dyn. Syst. Measure, Control, 123(4), 659-667. https://doi.org/10.1115/1.1410370
  16. Poozesh, P., Sarrafi, A., Mao, Z., Avitabile, P. and Niezrecki, C. (2017), "Feasibility of extracting operating shapes using phasebased motion magnification technique and stereophotogrammetry", J. Sound Vib., 407, 350-366. https://doi.org/10.1016/j.jsv.2017.06.003
  17. Portilla, J. and Simoncelli, E.P. (2000), "A parametric texture model based on joint statistics of complex wavelet coefficients", Int. J. Comput. Vision, 40(1), 49-70. https://doi.org/10.1023/A:1026553619983
  18. Sarrafi, A., Mao, Z., Niezrecki, C. and Poozesh, P. (2018), "Vibration-based damage detection in wind turbine blades using Phase-based Motion Estimation and motion magnification", J. Sound Vib., 421, 300-318. https://doi.org/10.1016/j.jsv.2018.01.050
  19. Siringoringo, D.M. and Fujino, Y. (2006), "Experimental study of laser Doppler vibrometer and ambient vibration for vibrationbased damage detection", Eng. Struct., 28(13), 1803-1815 https://doi.org/10.1016/j.engstruct.2006.03.006
  20. Siringoringo, D.M. and Fujino, Y. (2008), "System identification of suspension bridge from ambient vibration response", Eng. Struct., 30(2), 462-477. https://doi.org/10.1016/j.engstruct.2007.03.004
  21. Siringoringo, D.M. and Fujino, Y. (2009), "Non-contact operational modal analysis of structural members by laser Doppler vibrometer", Compt. Aided Civil. Infra. Eng., 24(4), 249-265. https://doi.org/10.1111/j.1467-8667.2008.00585.x
  22. Siringoringo, D.M., Fujino, Y., Nagasaki, A. and Matsubara, T. (2020), "Seismic performance evaluation of existing light poles on elevated highway bridges", Struct. Infra. Eng., 1-15. https://doi.org/10.1080/15732479.2020.1760894
  23. Vandiver, J.K., Dunwoody, A.B., Campbell, R.B. and Cook, M.F. (1982), "A mathematical basis for the random decrement vibration signature analysis technique", J. Mech. Des., 104(2), 307-313. https://doi.org/10.1115/1.3256341
  24. Wadhwa, N., Rubinstein, M., Durand, F. and Freeman, W.T. (2013), "Phase-based video motion processing", ACM Trans. Graphics, 32(4), 1-10. https://doi.org/10.1145/2461912.2461966
  25. Wenzel, H. (2009), Ambient Vibration Monitoring, John Wiley and Sons.
  26. Yang, Y., Dorn, C., Mancini, T., Talken, Z., Kenyon, G., Farrar, C. and Mascarenas, D. (2017), "Blind identification of full-field vibration modes from video measurements with phase-based video motion magnification", Mech. Syst. Signal Proc., 85, 567-590. https://doi.org/10.1016/j.ymssp.2016.08.041
  27. Yang, Y., Dorn, C., Mancini, T., Talken, Z., Theiler, J., Kenyon, G., Farrar, C. and Mascarenas, D. (2018), "Reference-free detection of minute, non-visible, damage using full-field, high-resolution mode shapes output-only identified from digital videos of structures", Struct. Health Monit., 17(3), 514-531. https://doi.org/10.1177/1475921717704385
  28. Yang, Y., Sanchez, L., Zhang, H., Roeder, A., Bowlan, J., Crochet, J., Farrar, C. and Mascarenas, D. (2019), "Estimation of full- field, full-order experimental modal model of cable vibration from digital video measurements with physics-guided unsupervised machine learning and computer vision", Struct. Control. Health Monitor., 26(6), e2358. https://doi.org/10.1002/stc.2358
  29. Yang, Y., Dorn, C., Farrar, C. and Mascarenas, D. (2020), "Blind, simultaneous identification of full-field vibration modes and large rigid-body motion of output-only structures from digital video measurements", Eng. Struct., 207, 110183. https://doi.org/10.1016/j.engstruct.2020.110183
  30. Ye, X.W., Dong, C.Z. and Liu, T. (2016a), "Image-based structural dynamic displacement measurement using different multi-object tracking algorithms", Smart. Struct. Syst., Int. J., 17(6), 935-956. https://doi.org/10.12989/sss.2016.17.6.935
  31. Ye, X.W., Dong, C.Z. and Liu, T. (2016b), "Force monitoring of steel cables using vision-based sensing technology: methodology and experimental verification", Smart. Struct. Syst., Int. J., 18(3), 585-599. https://doi.org/10.12989/sss.2016.18.3.585