DOI QR코드

DOI QR Code

Bridge weigh-in-motion through bidirectional Recurrent Neural Network with long short-term memory and attention mechanism

  • Wang, Zhichao (School of Civil and Environmental Engineering, Georgia Institute of Technology) ;
  • Wang, Yang (School of Civil and Environmental Engineering, Georgia Institute of Technology)
  • Received : 2020.07.07
  • Accepted : 2020.10.10
  • Published : 2021.02.25

Abstract

In bridge weigh-in-motion (BWIM), dynamic bridge response is measured during traffic and used to identify overloaded vehicles. Most past studies of BWIM use mechanics-based algorithms to estimate axle weights. This research instead investigates deep learning, specifically the recurrent neural network (RNN), toward BWIM. In order to acquire the large data volume to train a RNN network that uses bridge response to estimate axle weights, a finite element bridge model is built through the commercial software package LS-DYNA. To mimic everyday traffic scenarios, tens of thousands of randomized vehicle formations are simulated, with different combinations of vehicle types, spacings, speeds, axle weights, axle distances, etc. Dynamic response from each of the randomized traffic scenarios is recorded for training the RNN. In this paper we propose a 3-stage Bidirectional RNN toward BWIM. Long short-term memory (LSTM) and attention mechanism are embedded in the BRNN to further improve the network performance. Additional test data indicates that the BRNN network achieves high accuracy in estimating axle weights, in comparison with a conventional moving force identification (MFI) method.

Keywords

References

  1. Chan, T.H.T., Law, S.S., Yung, T.H. and Yuan, X.R. (1999), "An interpretive method for moving force identification", J. Sound Vib., 219(3), 503-524. https://doi.org/10.1006/jsvi.1998.1904
  2. Cho, K., Merrienboer, B., Bahdanau, D. and Bengio, Y. (2014), "On the properties of neural machine translation: encoderdecoder approaches", Proceedings of SSST-8, Eighth Workshop on Syntax, Semantics and Structure in Statistical Translation, Doha, Qatar, October.
  3. Chorowski, J., Bahdanau, D., Cho, K. and Bengio, Y. (2014), "End-to-end continuous speech recognition using attention-based recurrent NN: first results", Deep Learning and Representation Learning Workshop: NIPS 2014, Montreal, QC, Canada, December.
  4. Chung, J., Gulcehre, C., Cho, K. and Bengio, Y. (2014), "Empirical evaluation of gated recurrent neural networks on sequence modeling", Deep Learning and Representation Learning Workshop: NIPS 2014, Montreal, QC, Canada.
  5. Das, P. and Deka, G. (2016), History and Evolution of GPU Architecture, IGI Global, Hershey, PA, USA.
  6. Fu, G. and Hag-Elsafi, O. (2000), "Vehicular overloads: load model, bridge safety, and permit checking", J. Bridge Eng. ASCE, 5(1), 49-57. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:1(49)
  7. GDOT (2020), Highways, bridges and ferries, in Government of Georgia (ed.), Official Code of Georgia.
  8. Gonzalez, A., Rowley, C. and OBrien, E. (2008), "A general solution to the identification of moving vehicle forces on a bridge", Int. J. Numer. Methods Eng., 75, 335-354. https://doi.org/10.1002/nme.2262
  9. Goodfellow, I., Bengio, Y. and Courville, A. (2016), Deep Learning, MIT Press, Cambridge, MA, USA.
  10. Graves, A., Mohamed, A. and Hinton, G. (2013), "Speech recognition with deep recurrent neural networks", Proceedings of 2013 IEEE International Conference on Acoustics, Speech and Signal Processing, Vancouver, BC, Canada, May.
  11. Hochreiter, S. and Schmidhuber, J. (1997), "Long short-term memory", Neural Computat., 9, 1735-1780. https://doi.org/10.1162/neco.1997.9.8.1735
  12. Kawakatsu, T., Aihara, K., Takasu, A. and Adachi, J. (2019), "Deep sensing approach to single-sensor vehicle weighing system on bridges", IEEE Sensors J., 19(1), 243-256. https://doi.org/10.1109/JSEN.2018.2872839
  13. Kim, S., Lee, J., Park, M.-S. and Jo, B.-W. (2009), "Vehicle signal analysis using artificial neural networks for a bridge weigh-in-motion system", IEEE Sensors J., 9(10), 7943-7956. https://doi.org/10.3390/s91007943
  14. Krizhevsky, A., Sutskever, I. and Hinton, G. (2012), "ImageNet classification with deep convolutional neural networks", Commun. ACM, 60(6), 84-90. https://doi.org/10.1145/3065386
  15. Law, S.S. and Fang, Y.L. (2001), "Moving force identification: optimal state estimation approach", J. Sound Vib., 239(2), 233-254. https://doi.org/10.1006/jsvi.2000.3118
  16. Law, S.S., Chan, T.H.T. and Zeng, Q.H. (1997), "Moving force identification: a time domain method", J. Sound Vib., 201(1), 1-22. https://doi.org/10.1006/jsvi.1996.0774
  17. Law, S.S., Chan, T.H.T. and Zeng, Q.H. (1999), "Moving force identification-a frequency and time domains analysis", J. Dyn. Syst. Measure. Control ASME, 121(3), 394-401. https://doi.org/10.1115/1.2802487
  18. LeCun, Y., Bottou, L., Bengio, Y. and Haffner, P. (1998), "Gradient-based learning applied to document recognition", Proceedings of the IEEE, 86, 2278-2324. https://doi.org/10.1109/5.726791
  19. LeCun, Y., Bengio, Y. and Hinton, G. (2015), "Deep learning", Nature, 521(7553), 436-444. https://doi.org/10.1038/nature14539
  20. Lydon, M., Taylor, S.E., Robinson, D., Mufti, A. and Brien, E.J.O. (2016), "Recent developments in bridge weigh in motion (B-Wim)", J. Civil Struct. Health Monitor., 6(1), 69-81. https://doi.org/10.1007/s13349-015-0119-6
  21. Minsky, M. and Papert, S. (1969), Perceptrons: An Introduction to Computational Geometry, MIT Press, Cambridge, MA, USA.
  22. Moses, F. (1979), "Weigh-in-motion system using instrumented bridges", J. Transport. Eng., 105(3), 233-249.
  23. O'Connor, C. and Chan, T.H.T. (1988), "Dynamic wheel loads from bridge strains", J. Struct. Eng. ASCE, 114(8), 1703-1723. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1703)
  24. Quilligan, M. (2003), "Bridge weigh-in motion : development of a 2-D multi-vehicle algorithm", Trita-BKN. Bulletin, 69, pp. viii, 144, Byggvetenskap, Stockholm, Sweden.
  25. Rosenblatt, F. (1957), The Perceptron - a Perceiving and Recognizing Automaton, Cornell Aeronautical Laboratory.
  26. Rumelhart, D.E., Hinton, G.E. and Williams, R.J. (1986), "Learning representations by back-propagating errors", Nature, 323, 533-536. https://doi.org/10.1038/323533a0
  27. Schuster, M. and Paliwal, K.K. (1997), "Bidirectional recurrent neural networks", IEEE Transact. Signal Process., 45(11), 2673-2681. https://doi.org/10.1109/78.650093
  28. Selfridge, O.G. (1959), "Pandemonium: a paradigm for learning", In: Neurocomputing: Foundations of Research, pp. 115-122.
  29. Skokandic, D., Znidaric, A., Mandic-Ivankovic, A. and Kreslin, M. (2017), "Application of bridge weigh-in-motion measurements in assessment of existing road bridges", Proceedings of the Value of Structural Health Monitoring for the Reliable Bridge Management, Zagreb, Croatia, March.
  30. Srivastava, N., Hinton, G., Krizhevsky, A., Sutskever, I. and Salakhutdinov, R. (2014), "Dropout: a simple way to prevent neural networks from overfitting", J. Mach. Learn. Res., 15(56), 1929-1958.
  31. Sutskever, I., Vinyals, O. and Le, Q.V. (2014), "Sequence to sequence learning with neural networks", Proceedings of 2014 Advances in Neural Information Processing Systems, Montreal, QC, Canada, December.
  32. Tikhonov, A.N. and Arsenin, V.Y. (1977), Solutions of Ill-Posed Problems, Kluwer Academic Publishers.
  33. Wu, S. and Shi, Z. (2006), "Identification of vehicle axle loads based on FEM-Wavelet-Galerkin method", J. Vib. Eng., 19(4), 494-498. https://doi.org/10.3969/j.issn.1004-4523.2006.04.011
  34. Yang, J.C., Yu, K., Gong, Y.H. and Huang, T. (2009), "Linear spatial pyramid matching using sparse coding for image classification", Proceedings of 2009 IEEE Conference on Computer Vision and Pattern Recognition, Miami, FL, USA, June. https://doi.org/10.1109/CVPR.2009.5206757
  35. Yu, Y., Cai, C.S. and Deng, L. (2016), "State-of-the-art review on bridge weigh-in-motion technology", Adv. Struct. Eng. SAGE, 19(9), 1514-1530. https://doi.org/10.1177/1369433216655922
  36. Zhang, R., Lv, W. and Guo, Y. (2010), "A vehicle weigh-in-motion system based on Hopfield neural network adaptive filter", Proceedings of 2010 International Conference on Communications and Mobile Computing, Shenzhen, Guangdong, China, April. https://doi.org/10.1109/CMC.2010.11
  37. Zhang, Q.R., Zhang, M., Chen, T.H., Sun, Z.F., Ma, Y.Z. and Yu, B. (2019), "Recent advances in convolutional neural network acceleration", Neurocomputing, 323, 37-51. https://doi.org/10.1016/j.neucom.2018.09.038
  38. Zhu, X.Q. and Law, S.S. (2015), "Structural health monitoring based on vehicle-bridge interaction: accomplishments and challenges", Adv. Struct. Eng. SAGE, 18(12), 1999-2015. https://doi.org/10.1260/1369-4332.18.12.1999
  39. Zhu, X.Q. and Law, S.S. (2016), "Recent developments in inverse problems of vehicle-bridge interaction dynamics", J. Civil Struct. Health Monitor., 6(1), 107-128. https://doi.org/10.1007/s13349-016-0155-x
  40. Zhu, X.Q., Law, S.S. and Bu, J.Q. (2006), "A state space formulation for moving loads identification", J. Vib. Acoust. ASME, 128(4), 509-520. https://doi.org/10.1115/1.2202149