DOI QR코드

DOI QR Code

Stress, sensitivity and frequency analysis of the corrugated diaphragm for different corrugation structures

  • Farajollahi, Meisam (School of Advanced Technologies, Iran University of Science and Technology) ;
  • Goharzay, Mehrad (School of Mechanical Engineering, Amir Kabir University of Technology) ;
  • Borzuei, Daryoosh (School of Advanced Technologies, Iran University of Science and Technology) ;
  • Moosavian, Seyed Farhan (School of Advanced Technologies, Iran University of Science and Technology)
  • 투고 : 2020.08.10
  • 심사 : 2021.01.25
  • 발행 : 2021.05.25

초록

Corrugated and flat circular diaphragm-based piezoresistive pressure sensors are designed and proposed for different applications. Regarding to different criteria including maximum stress, sensitivity and natural frequency, different diaphragms with semicircular, sinusoidal and trapezoidal corrugation are modeled, simulated and investigated in finite element software. The finite element model is validated by experimental results from the literature and also with theoretical formula to ensure the accuracy of the finite element modeling process. Wavelength and location of the corrugation are optimized to achieve best performing sensor. For the application with large acceptable induced stress, circular flat diaphragm is proposed. To enhance the sensitivity of the sensor as a crucial parameter, semicircular corrugation for circular diaphragm with 360 ㎛ wavelength and 240 ㎛ distance from the center is designed and proposed. This configuration shows obvious improvement of the sensitivity with more than 18% enhancement. To extend the working range of the sensor regarding to input frequency, trapezoidal corrugation with 360 ㎛ wavelength and 240 ㎛ distance from the center is proposed to reach more than 29% enlargement in first natural frequency. Eventually, this paper tries to provide an overview to design the optimal pressure sensor according to desired specifications.

키워드

참고문헌

  1. Azqandi, M.S., Hassanzadeh, M. and Arjmand, M. (2019), "Sensitivity analysis based on complex variables in FEM for linear structures", Adv. Computat. Des., Int. J,, 4(1), 15-32. https://doi.org/10.12989/acd.2019.4.1.015
  2. Balavalad, K.B. and Sheeparamatti, B.G. (2015), "A critical review of MEMS capacitive pressure sensors", Sensors Transducers, 187(4), 120-128.
  3. Eaton, W.P., Bitsie, F., Smith, J.H. and Plummer, D.W. (1999), "A new analytical solution for diaphragm deflection and its application to a surface-micromachined pressure sensor", Proceedings of International Conference on Modeling and Simulation of Microsystems.
  4. Ebrahimi, F., Hosseini, S.H.S. and Singhal, A. (2020), "A comprehensive review on the modeling of smart piezoelectric nanostructures", Struct. Eng. Mech., Int. J., 74(5), 559-581. https://doi.org/10.12989/sem.2020.74.5.559
  5. Fathi, N.A. and Moradi, Z.A. (2014), "Design and Optimization of Piezoresistive MEMS Pressure Sensors Using ABAQUS", Middle-East J. Scientif. Res., 21(12), 2299-2305.
  6. Fu, C., Si, W., Li, H., Li, D., Yuan, P. and Yu, Y. (2017), "A novel high-performance beam-supported membrane structure with enhanced design flexibility for partial discharge detection", Sensors, 17(3), 593. https://doi.org/10.3390/s17030593
  7. Ganji, B.A. and Taybi, M. (2017), "A Novel High Sensitivity MEMS Acoustic Sensor using Corrugated Diaphragm", Majlesi J. Electr. Eng., 11(4), 53-57.
  8. Gui, Y., Zhang, Y., Liu, G., Hao, Y. and Gao, C. (2016), "Design and simulation of corrugated diaphragm applied to the MEMS fiber optic pressure sensor", Proceedings of IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Sendai, Japan, December, pp. 17-20.
  9. Hayber, S.E., Tabaru, T.E. and Saracoglu, O.G. (2019), "A novel approach based on simulation of tunable MEMS diaphragm for extrinsic Fabry-Perot sensors", Optics Communications, 430, 14-23. https://doi.org/10.1016/j.optcom.2018.08.021
  10. Hong, E., Trolier-McKinstry, S., Smith, R., Krishnaswamy, S.V. and Freidhoff, C.B. (2006), "Vibration of micromachined circular piezoelectric diaphragms", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 53(4), 697-705. https://doi.org/10.1109/TUFFC.2006.1621496
  11. Kaghazian, A., Hajnayeb, A. and Foruzande, H. (2017), "Free vibration analysis of a piezoelectric nanobeam using nonlocal elasticity theory", Struct. Eng. Mech., Int. J., 61(5), 617-624. https://doi.org/10.12989/sem.2017.61.5.617
  12. Ke, F., Miao, J. and Wang, Z. (2009), "A wafer-scale encapsulated RF MEMS switch with a stress-reduced corrugated diaphragm", Sensors Actuat., A: Phys., 151(2), 237-243. https://doi.org/10.1016/j.sna.2009.02.031
  13. Li, X., Lin, R., Kek, H., Miao, J. and Zou, Q. (2001), "Sensitivity-improved silicon condenser microphone with a novel single deeply corrugated diaphragm", Sensors Actuat. A: Phys., 92, 257-262. https://doi.org/10.1016/S0924-4247(01)00582-9
  14. Li, X., Liu, Q., Pang, S., Xu, K., Tang, H. and Sun, C. (2012), "High-temperature piezoresistive pressure sensor based on implantation of oxygen into silicon wafer", Sensors Actuat.: A. Phys., 179, 277-282. https://doi.org/10.1016/j.sna.2012.03.027
  15. Li, H., Deng, H., Zheng, G., Shan, M., Zhong, Z. and Liu, B. (2019), "Reviews on corrugated diaphragms in miniature fiber-optic pressure sensors", Appl. Sci., 9, 2241. https://doi.org/10.3390/app9112241
  16. Lou, L., Zhang, S., Park, W.T., Tsai, J.M., Kwong, D.L. and Lee, C. (2012), "Optimization of NEMS pressure sensors with a multilayered diaphragm using silicon nanowires as piezoresistive sensing elements", J. Micromech. Microeng., 22(5), 055012. https://doi.org/10.1088/0960-1317/22/5/055012
  17. Luharuka, R., Noh, H.M., Kim, S.K., Mao, H., Wong, L. and Hesketh, P.J. (2006), "Improved manufacturability and characterization of a corrugated Parylene diaphragm pressure transducer", J. Micromech. Microeng., 16, 1468-1474. https://doi.org/10.1088/0960-1317/16/8/005
  18. Malhaire, C. (2012), "Comparison of two experimental methods for the mechanical characterization of thin or thick films from the study of micromachined circular diaphragms", Rev. Scientif. Instrum., 83(5), 055008. https://doi.org/10.1063/1.4719964
  19. Mathur, H., Agarwal, V. and Sengar, K. (2017), "Finite Element Analysis of MEMS Based Piezoresistive Diamond Thin Film Cantilever Pressure Sensor", Int. Res. J. Eng. Technol., 4(2), 1685-1689.
  20. Meti, S., Balavald, K.B. and Sheeparmatti, B.G. (2016), "MEMS piezoresistive pressure sensor: a survey", Int. J. Eng. Res. Applicat., 6(4), 23-31.
  21. Miao, J., Lin, R., Chen, L., Zou, Q., Lim, S.Y. and Seah, S.H. (2002), "Design Considerations in Micromachined Silicon Microphones", Microelectr. J., 33(1-2), 21-28. https://doi.org/10.1016/S0026-2692(01)00100-8
  22. Mohammadi, V. and Sheikhi, M.H. (2009), "Design, Modeling and Optimization of a Multilayer Thin-Film Pzt Diaphragm Used in Pressure Sensor", Int. J. Eng. Appl. Sci., 1(4), 27-38.
  23. Mosser, V., Suski, J., Goss, J. and Obermeier, E. (1991), "Piezoresistive pressure sensors based on polycrystalline silicon", Sensors Actuat.: A. Phys., 28, 113-132. https://doi.org/10.1016/0924-4247(91)85020-O
  24. Nallathambi, A. and Shanmuganantham, T. (2015a), "Performance analysis of slotted square diaphragm for mems pressure sensor", ICTACT J. Microelectron., 1(2), 62-67. https://doi.org/10.21917/ijme.2015.0011
  25. Nallathambi, A. and Shanmuganantham, T. (2015b), "Design of diaphragm based MEMS pressure sensor with sensitivity analysis for environmental applications", Sensors Transduc., 188(5), 48-54.
  26. Niu, Z., Liu, K. and Wang, H. (2017), "A new method for the design of pressure sensor in hyperbaric environment", Sensor Review, 37(1), 110-116. https://doi.org/10.1108/SR-04-2016-0081
  27. Rahman, S.H.A., Soin, N. and Ibrahim, F. (2017), "Load deflection analysis of rectangular graphene diaphragm for MEMS intracranial pressure sensor applications", Microsyst. Technol., 24(2), 1147-1152. https://doi.org/10.1109/84.285722
  28. Scheeper, P.R., Olthuis, W. and Bergveld, P. (1994), "The design, fabrication, and testing of corrugated silicon nitride diaphragms", J. Microelectromech. Syst., 3(1), 36-42. https://doi.org/10.1109/84.285722
  29. Shaby, S.M., Premi, M.G. and Martin, B. (2015), "Enhancing the performance of MEMS piezoresistive pressure sensor using germanium nanowire", Procedia Mater. Sci., 10, 254-262. https://doi.org/10.1016/j.mspro.2015.06.048
  30. Shaklya, M., Magam, S.P. and Jindal, S.K. (2018), "Design, Modelling and Simulation of MEMS Piezo-Resistive Pressure Sensor with Clamped Edge Silicon Carbide Circular Diaphragm", Proceedings of the 3rd International Conference on Internet of Things and Connected Technologies, ICIoTCT, Jaipur, India, March, pp. 26-27. http://dx.doi.org/10.2139/ssrn.3170293
  31. Sim, W., Kim, D., Kim, K., Kwon, K., Kim, B., Choi, B., Yang, S. and Park, J. (2001), "Fabrication, Test and Simulation of a Parylene Diaphragm", In: Obermeier E. (eds) Transducers '01 Eurosensors XV, Springer, Berlin, Heidelberg, pp. 1382-1385. https://doi.org/10.1007/978-3-642-59497-7_319
  32. Sim, W., Kim, B., Choi, B. and Park, J.O. (2005), "Theoretical and experimental studies on the parylene diaphragms for microdevices", Microsyst. Technol., 11(1), 11-15. https://doi.org/10.1007/s00542-003-0342-7
  33. Suja, K.J., Raveendran, E.S. and Komaragiri, R. (2013), "Investigation on better sensitive silicon based MEMS pressure sensor for high pressure measurement", Int. J. Comput. Applicat., 72(8), 40-47.
  34. Suzuki, R., Nguyen, T.V., Takahata, T. and Shimoyama, I. (2019), "A Piezoresistive Vibration Sensor with Liquid on Corrugated Membrane", Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Seoul, Korea, January, pp. 688-691. https://doi.org/10.1109/MEMSYS.2019.8870790
  35. Tran, A.V., Zhang, X. and Zhu, B. (2018), "Mechanical structural design of a piezoresistive pressure sensor for low-pressure measurement: a computational analysis by increases in the sensor sensitivity", Sensors, 18, 1-15. https://doi.org/10.3390/s18072023
  36. Uzun, B. and Civalek, O. (2019), "Free vibration analysis Silicon nanowires surrounded by elastic matrix by nonlocal finite element method", Adv. Nano Res., Int. J., 7(2), 99-108. https://doi.org/10.12989/anr.2019.7.2.099
  37. Wang, W.J., Lin, R.M. and Ren, Y. (2004), "Design and fabrication of high sensitive microphone diaphragm using deep corrugation technique", Microsyst. Technol., 10(2), 142-146. https://doi.org/10.1007/s00542-003-0322-y
  38. Xu, T., Zhao, L., Jiang, Z., Guo, X., Ding, J., Xiang, W. and Zhao, Y. (2016), "A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure", Sensors Actuat.: A. Phys., 244, 66-76. https://doi.org/10.1016/j.sna.2016.04.027
  39. Yu, H. and Huang, J. (2015), "Design and application of a high sensitivity piezoresistive pressure sensor for low pressure conditions", Sensors, 15(9), 22692-22704. https://doi.org/10.3390/s150922692
  40. Zhao, L., Xu, T., Hebibul, R., Jiang, Z., Ding, J., Peng, N., Guo, X., Xu, Y., Wang, H. and Zhao, Y. (2016), "A bossed diaphragm piezoresistive pressure sensor with a peninsula-island structure for the ultra-low-pressure range with high sensitivity", Measure. Sci. Technol., 27, 1-21. https://doi.org/10.1088/0957-0233/27/12/124012
  41. Zhu, S.E., Krishna Ghatkesar, M., Zhang, C. and Janssen, G.C.A.M. (2013), "Graphene based piezoresistive pressure sensor", Applied Physics Letters, 102(16), 161904. https://doi.org/10.1063/1.4802799
  42. Zhu, J., Wang, M., Chen, L., Ni, X. and Ni, H. (2017), "An optical fiber Fabry-Perot pressure sensor using corrugated diaphragm and angle polished fiber", Optic. Fiber Technol., 34(1), 42-46. https://doi.org/10.1016/j.yofte.2016.12.004