DOI QR코드

DOI QR Code

A vibration based acoustic wave propagation technique for assessment of crack and corrosion induced damage in concrete structures

  • Kundu, Rahul Dev (Department of Civil Engineering, Indian Institute of Technology, Kharagpur, India and Intern, CSIR-Structural Engineering Research Centre (CSIR-SERC)) ;
  • Sasmal, Saptarshi (Special and Multifunctional Structures Laboratory, CSIR-Structural Engineering Research Centre (CSIR-SERC), CSIR-Structural Engineering Research Centre (CSIR-SERC))
  • 투고 : 2019.05.08
  • 심사 : 2021.04.12
  • 발행 : 2021.06.10

초록

Early detection of small concrete crack or reinforcement corrosion is necessary for Structural Health Monitoring (SHM). Global vibration based methods are advantageous over local methods because of simple equipment installation and cost efficiency. Among vibration based techniques, FRF based methods are preferred over modal based methods. In this study, a new coupled method using frequency response function (FRF) and proper orthogonal modes (POM) is proposed by using the dynamic characteristic of a damaged beam. For the numerical simulation, wave finite element (WFE), coupled with traditional finite element (FE) method is used for effectively incorporating the damage related information and faster computation. As reported in literature, hybrid combination of wave function based wave finite element method and shape function based finite element method can addresses the mid frequency modelling difficulty as it utilises the advantages of both the methods. It also reduces the dynamic matrix dimension. The algorithms are implemented on a three-dimensional reinforced concrete beam. Damage is modelled and studied for two scenarios, i.e., crack in concrete and rebar corrosion. Single and multiple damage locations with different damage length are also considered. The proposed methodology is found to be very sensitive to both single- and multiple- damage while being computationally efficient at the same time. It is observed that the detection of damage due to corrosion is more challenging than that of concrete crack. The similarity index obtained from the damage parameters shows that it can be a very effective indicator for appropriately indicating initiation of damage in concrete structure in the form of spread corrosion or invisible crack.

키워드

과제정보

The first author would like to acknowledge the support received during Prof. G. S. Ramaswamy Summer Internship from CSIR-Structural Engineering Research Centre, Chennai, India.

참고문헌

  1. Alamdari, M.M., Li, J., Samali, B. and Ahmadian, H. (2013), "Nonlinear joint model updating in assembled structures", J. Eng. Mech., 140(7), 04014042. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000759.
  2. Bagherahmadi, S.A. and Seyedpoor, S.M. (2018), "Structural damage detection using a damage probability index based on frequency response function and strain energy concept", Struct. Eng. Mech., 67(4), 327-336. http://doi.org/10.12989/sem.2018.67.4.327.
  3. Banjara, N.K., Sasmal, S. and Voggu, S. (2020), "Machine learning supported acoustic emission technique for leakage detection in pipelines", Int. J. Press. Ves. Pip., 188, 104243. http://doi.org/10.1016/j.ijpvp.2020.104243.
  4. Brillouin, L. (1953), Wave Propagation in Periodic Structures, Dover Publications, New York.
  5. Castaldo, P., Gino, D. and Mancini, G. (2019), "Safety formats for non-linear finite element analysis of reinforced concrete structures: discussion, comparison and proposals", Eng. Struct., 193, 136-153. https://doi.org/10.1016/j.engstruct.2019.05.029.
  6. Chady, T. and Lopato, P. (2006), "Flaws identification using Eddy current differential transducer and artificial neural networks", AIP Conf. Proc., 820, 783-790. https://doi.org/10.1063/1.2184606.
  7. Duhamel, D., Mace, B.R. and Brennan, M.J. (2006), "Finite element analysis of the vibrations of waveguides and periodic structures", J. Sound Vib., 294, 205-220. https://doi.org/10.1016/j.jsv.2005.11.014.
  8. Finnveden, S. (2004), "Evaluation of modal density and group velocity by a finite element method", J. Sound Vib., 273, 51-75. https://doi.org/10.1016/j.jsv.2003.04.004.
  9. Holicky, M., Retief, J.V. and Sykora, M. (2016, "Assessment of model uncertainties for structural resistance", Prob. Eng. Mech., 45, 188-197. https://doi.org/10.1016/j.probengmech.2015.09.008.
  10. Kessentini, A., Taktak, M., Ben Souf, M.A., Bareille, O., Ichchou, M.N. and Haddar, M. (2016), "Computation of the scattering matrix of guided acoustical propagation by the Wave Finite Element approach", Appl. Acoust. Multiphy. Syst., 108, 92-100. https://doi.org/10.1016/j.apacoust.2015.09.004.
  11. Kharrat, M., Ichchou, M.N., Bareille, O. and Zhou, W.J. (2014), "Pipeline inspection using a torsional guided-waves inspection system. Part 2: Defect sizing by the Wave Finite Element Method", Int. J. Appl. Mech., 6(4), 1450035. https://doi.org/10.1142/S1758825114500355.
  12. Kim, Y.S and Eun, H.C. (2017), "Comparison of damage detection methods depending on frfs within specified frequency ranges", Adv. Mater. Sci. Eng., Article ID 5821835. https://doi.org/10.1155/2017/5821835.
  13. Kudva, J.N., Munir, N. and Tan, P.W. (1992), "Damage detection in smart structures using neural networks and finite-element analyses", Smart Mater. Struct., 1(2), 108. https://doi.org/10.1088/0964-1726/1/2/002.
  14. Lee, E.T. and Eun, H.C. (2015), "Damage identification based on the proper orthogonal mode energy curvature", J. Vib. Acoust., 137, Paper No: VIB-14-1235. https://doi.org/10.1115/1.4030043.
  15. Li, Y.Y. and Chen, Y. (2013), "A review on recent development of vibration-based structural robust damage detection", Struct. Eng. Mech., 45(2), 159-168. http://doi.org/10.12989/sem.2013.45.2.159.
  16. Liu, W., Hunsperger, R.G., Chajes, M.J., Folliard, K.J. and Kunz, E. (2002), "Corrosion detection of steel cables using time domain reflectometry", J. Mater. Civil Eng., 14(3), 217-223. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:3(217).
  17. Lyon, R.H., DeJong, R.G. and Heckl, M. (1995), Theory and Application of Statistical Energy Analysis, Butterworth-Heinemann, Boston.
  18. Maia, N.M.M., Silva, J.M.M. and Sampaio, R.C. (1997), "Localization of damage using curvature of the frequency response functions", Proceedings of SPIE-The International Society for Optical Engineering, 942.
  19. Marzani A., Viola, E., Bartoli, I., di Scalea, F.L. and Rizzo, P. (2008), "A semi-analytical finite element formulation for modelling stress wave propagation in axisymmetric damped waveguides", J. Sound Vib., 318(3), 488-505. https://doi.org/10.1016/j.jsv.2008.04.028.
  20. Masri, E., Ferguson, N.S. and Waters, T. (2016), "Wave propagation in reinforced and prestressed concrete structures with damage", ISMA2016 Conference on Noise and Vibration Engineering, Leuven, Belgium, September.
  21. Mohan, S.C., Maiti, D.K. and Maity, D. (2013), "Structural damage assessment using FRF employing particle swarm optimization", Appl. Math. Comput., 219(20), 10387-10400. https://doi.org/10.1016/j.amc.2013.04.016.
  22. Nebab, M., Atmane, H.A., Bennai, R., Tounsi, A. and Adda Bedia, E.A. (2019), "Vibration response and wave propagation in FG plates resting on elastic foundations using HSDT", Struct. Eng. Mech., 69(5), 511-525. http://doi.org/10.12989/sem.2019.69.5.511.
  23. Nelson, R.B., Dong, S.B. and Kalra, R.D. (1971), "Vibrations and waves in laminated orthotropic circular cylinders", J. Sound Vib., 18(3), 429-444. https://doi.org/10.1016/0022-460X(71)90714-0.
  24. Nguyen, V.V., Li J., Erkmen, E., Alamdari, M.M. and Dackermann, U. (2018), "FRF sensitivity-based damage identification using linkage modeling for limited sensor arrays", Int. J. Struct. Stab. Dyn., 18(8), 1840002. https://doi.org/10.1142/S0219455418400023.
  25. Paetsch O., Baum D., Prohaska S., Ehrig K., Meinel D. and Ebell G. (2015), "3D corrosion detection in time-dependent CT images of concrete", Proceedings of the Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, June.
  26. Pluymers, B. (2006), "Wave based modelling methods for steady-state vibro-acoustics", Ph.D. Thesis, KU Leuven.
  27. Polimeno, M. R., Roselli, I., Luprano, V.A., Mongelli, M., Tati, A. and De Canio, G. (2018), "A non-destructive testing methodology for damage assessment of reinforced concrete buildings after seismic events", Eng. Struct., 163, 122-136. http://doi.org/10.1016/j.engstruct.2018.02.053.
  28. Pradhan, B. and Bhattacharjee, B. (2009), "Half-cell potential as an indicator of chloride-induced rebar corrosion initiation in RC", J. Mater. Civil Eng., ASCE, 21(10), 543-552. http://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(543).
  29. Rao, R. and Sasmal, S. (2019), "Detection of flaw in steel anchor-concrete composite using high-frequency wave characteristics", Steel Compos. Struct., 31(4), 341-359. http://doi.org/10.12989/scs.2019.34.1.341.
  30. Rao, R. and Sasmal, S. (2020), "Smart nano-engineered cementitious composite sensors for vibration-based health monitoring of large structures", Sensor. Actuat. A: Phys., 311, 112088. http://doi.org/10.1016/j.sna.2020.112088.
  31. Renno, J.M. and Mace, B.R. (2013), "Calculation of reflection and transmission coefficients of joints using a hybrid finite element/wave and finite element approach", J. Sound Vib., 332, 2149-2164. https://doi.org/10.1016/j.jsv.2012.04.029.
  32. Sathiyanarayanan, S., Natarajan, P, Saravanan, K., Srinivasan, S. and Venkatachari, G. (2006), "Corrosion monitoring of steel in concrete by galvanostatic pulse technique", Cement Concrete Compos., 28(7), 630-637, https://doi.org/10.1016/j.cemconcomp.2006.03.005.
  33. Singh, D.V., Sachan, A.K. and Rawat, A. (2016), "Developments in corrosion detection techniques for reinforced concrete structures", Ind. J. Sci. Technol., 9(2), 1-5. https://doi.org/10.17485/ijst/2016/v9i30/99205.
  34. Song, C. (2009), "The scaled boundary finite element method in structural dynamics", Int. J. Numer. Meth. Eng., 77(8), 1139- 1171. https://doi.org/10.1002/nme.2454.
  35. Srinivas, V., Sasmal, S. and Ramanjaneyulu, K. (2014), "Damage-sensitive features from non-linear vibration response of reinforced concrete structures", Struct. Hlth. Monit., 13(3), 233-250. https://doi.org/10.1177/1475921713520028.
  36. Srinivas, V., Sasmal, S., Ramanjaneyulu, K. and Jeyasehar, C.A. (2013), "Influence of test conditions on modal characteristics of reinforced concrete structures under different damage scenarios", Arch. Civil Mech. Eng., 13(4), 491-505. https://doi.org/10.1016/j.acme.2013.04.006.
  37. Thirumalaiselvi, A. and Sasmal, S. (2021), "Pattern recognition enabled acoustic emission signatures for crack characterization during damage progression in large concrete structures", Appl. Acoust., 175, 107797. https://doi.org/10.1016/j.apacoust.2020.107797.
  38. Van Hal, B., Desmet, W., Pluymers, B., Vandepitte, D. and Sas, P. (2002), "Improving the wave based method for the steady-state dynamic analysis of acoustic systems", Proceedings of the Ninth International Congress on Sound and Vibration (ICSV9), Orlando, Florida, June.
  39. Voggu, S. and Sasmal, S. (2021), "Dynamic nonlinearities for identification of the breathing crack type damage in reinforced concrete bridges", Struct. Hlth. Monit., 20(1), 339-359. https://doi.org/10.1177/1475921720930990.
  40. Waki, Y., Mace, B.R. and Brennan, M.J. (2009a), "Free and forced vibrations of a tyre using a wave/finite element approach", J. Sound Vib., 323, 737-756. https://doi.org/10.1016/j.jsv.2009.01.006.
  41. Waki, Y., Mace, B.R. and Brennan, M.J. (2009b), "Numerical issues concerning the wave and finite element method for free and forced vibrations of waveguides", J. Sound Vib., 327, 92-108. https://doi.org/10.1016/j.jsv.2009.06.005.
  42. Wang, D., Ye, L., Su, Z., Lu, Y., Li, F. and Meng, G. (2010), "Probabilistic damage identification based on correlation analysis using guided wave signals in aluminum plates", Struct. Hlth. Monit., 9(2), 133-144. https://doi.org/10.1177/1475921709352145.
  43. Yazdanpanah, O., Seyedpoor, S.M. and Bengar, H.A. (2015), "A new damage detection indicator for beams based on mode shape data", Struct. Eng. Mech., 53(4), 725-744. https://doi.org/10.12989/sem.2015.53.4.725.
  44. Zhou, W.J., Ichchou, M.N. and Bareille, O. (2011), "Finite element techniques for calculations of wave modes in one-dimensional structural waveguides", Struct. Control Hlth. Monit., 18, 737-751. https://doi.org/10.1002/stc.488.
  45. Zienkiewicz, O.C, Taylor, R. and Z Zhu, J. (2005), The Finite Element Method: Its Basis and Fundamentals, Butterworth-Heinemann, Oxford, United Kingdom.